Laser vibrometry from a moving ground vehicle.

We investigated the fundamental limits to the performance of a laser vibrometer that is mounted on a moving ground vehicle. The noise floor of a moving laser vibrometer consists of speckle noise, shot noise, and platform vibrations. We showed that speckle noise can be reduced by increasing the laser spot size and that the noise floor is dominated by shot noise at high frequencies (typically greater than a few kilohertz for our system). We built a five-channel, vehicle-mounted, 1.55 µm wavelength laser vibrometer to measure its noise floor at 10 m horizontal range while driving on dirt roads. The measured noise floor agreed with our theoretical estimates. We showed that, by subtracting the response of an accelerometer and an optical reference channel, we could reduce the excess noise (in units of micrometers per second per Hz(1/2)) from vehicle vibrations by a factor of up to 33, to obtain nearly speckle-and-shot-noise-limited performance from 0.3 to 47 kHz.

Heterodyne detection with a weak local oscillator.

Heterodyne detection in the limit of weak (a few photons) local oscillator and signal power levels has been largely neglected in the past, as authors almost always assumed that the noise was dominated by the shot noise from a strong local oscillator. We present the theory for heterodyne detection of diffuse and specular targets at arbitrary power levels, including the case where the local oscillator power is only a few photons per coherent integration period. The theory was tested with experimental results, and was found to show good agreement. We show how to interpret the power spectral density of the heterodyne signal and how to determine the optimal number of signal and local oscillator photons per coherent integration.

Acquisition algorithm for direct-detection ladars with Geiger-mode avalanche photodiodes.

An optimal algorithm for detecting a target using a ladar system employing Geiger-mode avalanche photodiodes (GAPDs) is presented. The algorithm applies to any scenario where a ranging direct detection ladar is used to determine the presence of a target against a sky background within a specified range window. A complete statistical model of the detection process for GAPDs is presented, including GAPDs that are inactive for a fixed period of time each time they fire. The model is used to develop a constant false alarm rate detection algorithm that minimizes acquisition time. Numerical performance predictions, simulation results, and experimental results are presented.

Saturation effects in heterodyne detection with Geiger-mode InGaAs avalanche photodiode detector arrays.

We report, to the best of our knowledge, the first demonstration of heterodyne detection of a glint target using an InGaAs avalanche photodiode detector (APD) array in the Geiger mode. Due to the finite number of pixels, all such photon-counting arrays necessarily suffer from saturation effects. At large photon fluxes, saturation of the APD degrades the Doppler frequency resolution and the signal-to-noise ratio (SNR). We derive analytical expressions for the Doppler resolution and SNR, taking saturation effects into account. The optimal local oscillator power can be obtained numerically from the SNR expression.

Ultralow-jitter, 1550-nm mode-locked semiconductor laser synchronized to a visible optical frequency standard.

Using high-bandwidth feedback, we have synchronized the pulse train from a mode-locked semiconductor laser to an external optical atomic clock signal and achieved what is to our knowledge the lowest timing jitter to date (22 fs, integrated from 1 Hz to 100 MHz) for such devices. The performance is limited by the intrinsic noise of the phase detector used for timing-jitter measurement. We expect such a highly stable device to play an important role in fiber-network-based precise time/frequency distribution.

Timing jitter eater for optical pulse trains.

Using a single phase modulator and dispersive fiber, we demonstrate a 12-dB reduction in the phase noise of a train of 6.5-ps pulses at a repetition rate of 10 GHz. A prechirp fiber is shown to improve performance.

Quantum-limited noise performance of a mode-locked laser diode.

Low-noise operation of a 9-GHz hybridly mode-locked laser diode is demonstrated. The integrated timing jitter was 47 fs (10 Hz to 10 MHz) and 86 fs (10 Hz to 4.5 GHz), with a pulse width of 6.7 ps. The noise performance as a function of filter bandwidth and oscillator noise is also addressed.