Colloidal and interfacial properties of spray dried pulse protein-blueberry polyphenol particles in model dispersion systems.

The phytochemical composition and physicochemical attributes of polyphenol-enriched protein particle ingredients produced with pulse proteins (e.g. chickpea protein, pea protein, and a chickpea-pea protein blend) and polyphenols recovered from wild blueberry pomace were investigated for colloidal and interfacial properties. Anthocyanins were the major polyphenol fraction (27.74-36.47 mg C3G/g) of these polyphenol-rich particles (44.95-62.08 mg GAE/g). Dispersions of pea protein-polyphenol particles showed a superior phase stability before and after heat treatment compared to the chickpea pea protein-polyphenol system. This observation was independent of the added amount of NaCl in the dispersion. In general, at quasi equilibrium state, pulse protein-polyphenol particles and parental pulse protein ingredients showed similar oil-water interfacial tension. However, pea protein-polyphenol particles demonstrated a reduced diffusion-driven oil-water interfacial adsorption rate constant compared to the parental pea protein ingredient. Overall, the obtained results suggest application potential of pea protein-polyphenol particles as a functional food/beverage ingredient.

Leaf Spot Disease of Michelia alba caused by Alternaria alternata in China.

The perennial deciduous tree Michelia alba is a widely cultivated street plant in China. In June 2021 and March 2022, M. alba trees with leaf spots were found in the green belt of the approximately 200,000 m2 community (32.62°N, 116.98°E) of Tianjia'an District, Huainan, Anhui, China, where approximately half of the M. alba trees had brown leaf spots surrounded with irregular yellow halos ranging from 2 to 6 mm in diameter (Fig S1A). The leaves of M. alba trees with multiple lesions became blighted. To isolate the potential pathogens causing leaf spot symptoms in M. alba trees, twenty fragments (2 cm2) were excised from the margin of the necrosis on symptomatic leaves, immersed in 1% sodium hypochlorite for 45 s, and then washed three times in sterile water. The fragments were plated and incubated on potato dextrose agar (PDA) at 25 °C and 15 dark green fungal colonies were obtained 5 days later. Single-spore isolates of the fungal colonies plated on potato carrot agar (PCA, Simmons 2007) produced gray, floccose colonies, which reached 71 mm after 7 days at 25 °C were obtained 5 days later (Fig S1C). Optical microscopy analysis showed that single-spore isolates formed sparsely branched chains with pale brown conidiophores on PCA after incubation at 25 °C in darkness for 7 days. The conidia were ellipsoidal, inverted rod, or ovoid, light brown, and 10.0 to 52.5 × 4.5 to 22.7 µm, with zero to four longitudinal or oblique and zero to eight transverse septa (n = 50). Partial conidia are 2.5 to 27.5 × 0.6 to 3.7 µm with cylindrical light brown beaks (n = 50) (Fig S1D, E). The cultural and morphological characteristics of the isolated fungi were consistent with the description of Alternaria alternata (Woudenberg et al. 2015). To further characterize the isolated fungi, the genomic DNA of three representative strains (BYL-1, BYL-2 and BYL-3) were extracted from their mycelia, respectively. ITS region and housekeeping genes GPD, and TEF, were amplified and sequenced using ITS4/ITS5 (White et al. 1990), Gpd1/Gpd2 (Berbee et al. 1999), and EF1-728F/EF1-986R (Carbone and Kohn 1999), primer pairs, respectively. BLAST analysis showed that the isolates BYL-1 (GenBank accession nos. OP325693, OP405008, and OP405009), BYL-2 (GenBank accession nos. PP057859, PP138442, and PP138444), and BYL-3 (GenBank accession nos. PP057860, PP138443, and PP138445) shared 99 to 100% identity with Alternaria alternata (GenBank accession nos. AF347032.1, AY278809.1, KC584693.1), which suggested that all the three isolates belong to A. alternata. The identifications were further confirmed by phylogenetic analysis based on combined DNA sequences data of ITS, GPD, and TEF. As showed in Fig S2, the strains of BYL-1 , BYL-2 and BYL-3 formed a robust clade with A. alternata CBS918.96. Taken together, the morphology and molecular assays suggest that strain BYL-1 is A. alternata. To test pathogenicity, the isolate BYL-1 was cultured on PCA for 7 days to prepare conidial suspensions, and the spore concentration was adjust to a final concentration of 105 spores/ml. The leaves of 3-5-leaf stage of six 5-years-old natural planting M. alba plants were sprayed with conidial suspensions and sterile distilled water, respectively. The petiole of each inoculated leaves of M. alba were secured with sterile wet cotton, and covered with plastic bags to prevent moisture evaporation after incubation. After a 3- to 5- day of inoculation, necrotic lesions appeared on the leaves inoculated with conidial suspensions, whereas no necrotic lesion was observed in the control leaves inoculated with sterile distilled water (Fig S1B). To fulfill the Koch,s postulates, fungi were re-isolated from the margin of necrotic lesions and identified as A. alternata by DNA sequencing the ITS gene. To our knowledge, this is the first report of A. alternata causing leaf spot on M. alba. Because the disease could cause damage to the foliage influencing the greening and ornamental effects of these trees, control measures may need to be implemented during daily management.

Phosphorylation of Bub1 by Mph1 promotes Bub1 signaling at the kinetochore to ensure accurate chromosome segregation.

Bub1 is a conserved mitotic kinase involved in signaling of the spindle assembly checkpoint. Multiple phosphorylation sites on Bub1 have been characterized, yet it is challenging to understand the interplay between the multiple phosphorylation sites due to the limited availability of phosphospecific antibodies. In addition, phosphoregulation of Bub1 in Schizosaccharomyces pombe is poorly understood. Here we report the identification of a new Mph1/Mps1-mediated phosphorylation site, i.e., Ser532, of Bub1 in Schizosaccharomyces pombe. A phosphospecific antibody against phosphorylated Bub1-Ser532 was developed. Using the phosphospecific antibody, we demonstrated that phosphorylation of Bub1-Ser352 was mediated specifically by Mph1/Mps1 and took place during early mitosis. Moreover, live-cell microscopy showed that inhibition of the phosphorylation of Bub1 at Ser532 impaired the localization of Bub1, Mad1, and Mad2 to the kinetochore. In addition, inhibition of the phosphorylation of Bub1 at Ser532 caused anaphase B lagging chromosomes. Hence, our study constitutes a model in which Mph1/Mps1-mediated phosphorylation of fission yeast Bub1 promotes proper kinetochore localization of Bub1 and faithful chromosome segregation.

Identification of the BcLEA Gene Family and Functional Analysis of the BcLEA73 Gene in Wucai (Brassica campestris L.).

Late embryogenesis abundant (LEA) proteins are important developmental proteins in the response of plants to abiotic stress. In our previous study, BcLEA73 was differentially expressed under low-temperature stress. Herein, we combined bioinformatics analysis, subcellular localization, expression assays, and stress experiments (including salt, drought, and osmotic stress) to identify and analyze the BcLEA gene family. Gene cloning and functional analysis of BcLEA73 were performed in tobacco and Arabidopsis. Based on the sequence homology and the available conservative motif, 82 BrLEA gene family members were identified and were divided into eight subfamilies in the genome-wide database of Chinese cabbage. The analysis showed that the BrLEA73 gene was located on chromosome A09 and belonged to the LEA_6 subfamily. Quantitative real-time PCR analysis indicated that the BcLEA genes were differentially expressed to varying degrees in the roots, stems, leaves, and petioles of Wucai. The overexpressed BcLEA73 transgenic plants exhibited no significant differences in root length and seed germination rates compared to the wild-type (WT) plants under control conditions. Under salt and osmotic stress treatment, the root length and seed germination rates of the BcLEA73-OE strain were significantly greater than those of WT plants. Under salt stress, the total antioxidant capacity (T-AOC) of the BcLEA73-OE lines increased significantly, and the relative conductivity, (REL), hydrogen peroxide (H2O2) content, and superoxide anion (O2-) production rate decreased significantly. Under drought treatment, the survival rate of the BcLEA73-OE lines was significantly higher than that of WT plants. These results showed that the BcLEA73 gene of Wucai functions in enhancing the tolerance of plants to salt, drought, and osmotic stress. This study provides a theoretical basis to explore the relevant functions of the BcLEA gene family members of Wucai.

The fission yeast kinetochore complex Mhf1-Mhf2 regulates the spindle assembly checkpoint and faithful chromosome segregation.

The outer kinetochore serves as a platform for the initiation of the spindle assembly checkpoint (SAC) and for mediating kinetochore-microtubule attachments. How the inner kinetochore subcomplex CENP-S-CENP-X is involved in regulating the SAC and kinetochore-microtubule attachments has not been well characterized. Using live-cell microscopy and yeast genetics, we found that Mhf1-Mhf2, the CENP-S-CENP-X counterpart in the fission yeast Schizosaccharomyces pombe, plays crucial roles in promoting the SAC and regulating chromosome segregation. The absence of Mhf2 attenuates the SAC, impairs the kinetochore localization of most of the components in the constitutive centromere-associated network (CCAN), and alters the localization of the kinase Ark1 (yeast homolog of Aurora B) to the kinetochore. Hence, our findings constitute a model in which Mhf1-Mhf2 ensures faithful chromosome segregation by regulating the accurate organization of the CCAN complex, which is required for promoting SAC signaling and for regulating kinetochore-microtubule attachments. This article has an associated First Person interview with the first author of the paper.

Highly Sensitive Electro-Plasmonic Switches Based on Fivefold Stellate Polyhedral Gold Nanoparticles.

Electron-photon coupling in metal nanostructures has raised a new trend for active plasmonic switch devices in both fundamental understanding and technological applications. However, low sensitivity switches with an on/off ratio less than 5 have restricted applications. In this work, an electrically modulated plasmonic switch based on a surface-enhanced Raman spectroscopy (SERS) system with a single fivefold stellate polyhedral gold nanoparticle (FSPAuNP) is reported. The reversible switch of the SERS signal shows high sensitivity with an on/off ratio larger than 30. Such a high on/off ratio arises primarily from the plasmonic resonance shift of the FSPAuNP with the incident laser due to the altered free electron density on the nanoparticle under an applied electrochemical potential. This highly sensitive electro-plasmonic switch may enable further development of plasmonic devices.

Synergistic modulation of surface interaction to assemble metal nanoparticles into two-dimensional arrays with tunable plasmonic properties.

A simple strategy based on the synergistic modulation of inter-particle and substrate-particle interaction is applied for the large-scale fabrication of two-dimensional (2D) Au and Ag nanoparticle arrays. The surface charge of the substrate is used to redistribute the double layer electric charges on the particles and to modulate the inter-particle distance within the 2D nanoparticle arrays on the substrate. The resultant arrays, with a wide range of inter-particle distances, display tunable plasmonic properties. It can be foreseen that such 2D nanoparticle arrays possess potential applications as multiplexed colorimetric sensors, integrated devices and antennas. Herein, it is demonstrated that these arrays can be employed as wavelength-selective substrates for multiplexed acquisition of surface-enhanced Raman scattering (SERS) spectra. This simple one step process provides an attractive and low cost strategy to produce high quality and large area 2D ordered arrays with tunable properties.

Bio-inspired antireflective hetero-nanojunctions with enhanced photoactivity.

A bio-inspired antireflective hetero-nanojunction structure has been fabricated by the hydrothermal growth of ZnO nanorods on silicon micro-pyramids. It has been shown that this structure suppresses light reflection more effectively resulting in a high photocurrent response and good charge separation simultaneously. The strategy provides a means to enhance solar energy conversion.

Sericin for resistance switching device with multilevel nonvolatile memory.

Resistance switching characteristics of natural sericin protein film is demonstrated for nonvolatile memory application for the first time. Excellent memory characteristics with a resistance OFF/ON ratio larger than 10(6) have been obtained and a multilevel memory based on sericin has been achieved. The environmentally friendly high performance biomaterial based memory devices may hold a place in the future of electronic device development.

Gold nanotip array for ultrasensitive electrochemical sensing and spectroscopic monitoring.

A gold nanotip array platform with a combination of ultrasensitive electrochemical sensing and spectroscopic monitoring capability is reported. Adenosine triphosphate is detected down to 1 pM according to the impedance changes in response to aptamer-specific binding. Furthermore, the local molecular information can be monitored at the individual plasmonic nanotips, and hence provide the capability for a better understanding of complex biological processes.

Controlled synthesis of hollow Cu2-x Te nanocrystals based on the Kirkendall effect and their enhanced CO gas-sensing properties.

This paper develops a facile solution-based method to synthesize hollow Cu2-x Te nanocrystals (NCs) with tunable interior volume based on the Kirkendall effect. Transmission electron microscopy images and time-dependent absorption spectra reveal the temporal growth process from solid copper nanoparticles to hollow Cu2-x Te NCs. Furthermore, the as-prepared hollow Cu2-x Te NCs show enhanced sensitivity for the detection of carbon monoxide (CO), which is often referred to as the "silent killer". The response and recovery time of the as-prepared sensor for the detection of 100 ppm CO gas are estimated to be about 21 and 100 s, respectively, which are sufficient to render it a promising candidate for effective CO gas-sensing applications. Such enhanced performance is achieved owing to the small grain size and large specific area of the hollow nanostructures. Therefore, the obtained hollow NCs based on the Kirkendall effect may have the potential as new functional blocks for high-performance gas sensors.

Synthesis of fivefold stellate polyhedral gold nanoparticles with {110}-facets via a seed-mediated growth method.

New Type of Gold Nanoparticle: A new class of fivefold stellate polyhedral gold nanoparticles (FSPAuNPs) with {110} facets have been synthesized by a seed-mediated growth method without adding surfactant. The size of FSPAuNPs can be simply adjusted from nanoscale to microscale by varying the amount of seeds, which results in a shift of the surface plasmon resonance peak from the visible to the NIR range.