A Variable Stiffness Actuator Module With Favorable Mass Distribution for a Bio-inspired Biped Robot.

Achieving human-like locomotion with humanoid platforms often requires the use of variable stiffness actuators (VSAs) in multi-degree-of-freedom robotic joints. VSAs possess 2 motors for the control of both stiffness and equilibrium position. Hence, they add mass and mechanical complexity to the design of humanoids. Mass distribution of the legs is an important design parameter, because it can have detrimental effects on the cost of transport. This work presents a novel VSA module, designed to be implemented in a bio-inspired humanoid robot, Binocchio, that houses all components on the same side of the actuated joint. This feature allowed to place the actuator's mass to more proximal locations with respect to the actuated joint instead of concentrating it at the joint level, creating a more favorable mass distribution in the humanoid. Besides, it also facilitated it's usage in joints with centralized multi-degree of freedom (DoF) joints instead of cascading single DoF modules. The design of the VSA module is presented, including it's integration in the multi-DoFs joints of Binocchio. Experiments validated the static characteristics of the VSA module to accurately estimate the output torque and stiffness. The dynamic responses of the driving and stiffening mechanisms are shown. Finally, experiments show the ability of the actuation system to replicate the envisioned human-like kinematic, torque and stiffness profiles for Binocchio.

The Challenges and Achievements of Experimental Implementation of an Active Transfemoral Prosthesis Based on Biological Quasi-Stiffness: The CYBERLEGs Beta-Prosthesis.

The CYBERLEGs Beta-Prosthesis is an active transfemoral prosthesis that can provide the full torque required for reproducing average level ground walking at both the knee and ankle in the sagittal plane. The prosthesis attempts to produce a natural level ground walking gait that approximates the joint torques and kinematics of a non-amputee while maintaining passively compliant joints, the stiffnesses of which were derived from biological quasi-stiffness measurements. The ankle of the prosthesis consists of a series elastic actuator with a parallel spring and the knee is composed of three different systems that must compliment each other to generate the correct joint behavior: a series elastic actuator, a lockable parallel spring and an energy transfer mechanism. Bench testing of this new prosthesis was completed and demonstrated that the device was able to create the expected torque-angle characteristics for a normal walker under ideal conditions. The experimental trials with four amputees walking on a treadmill to validate the behavior of the prosthesis proved that although the prosthesis could be controlled in a way that allowed all subjects to walk, the accurate timing and kinematic requirements of the output of the device limited the efficacy of using springs with quasi-static stiffnesses. Modification of the control and stiffness of the series springs could provide better performance in future work.

Human-like compliant locomotion: state of the art of robotic implementations.

This review paper provides a synthetic yet critical overview of the key biomechanical principles of human bipedal walking and their current implementation in robotic platforms. We describe the functional role of human joints, addressing in particular the relevance of the compliant properties of the different degrees of freedom throughout the gait cycle. We focused on three basic functional units involved in locomotion, i.e. the ankle-foot complex, the knee, and the hip-pelvis complex, and their relevance to whole-body performance. We present an extensive review of the current implementations of these mechanisms into robotic platforms, discussing their potentialities and limitations from the functional and energetic perspectives. We specifically targeted humanoid robots, but also revised evidence from the field of lower-limb prosthetics, which presents innovative solutions still unexploited in the current humanoids. Finally, we identified the main critical aspects of the process of translating human principles into actual machines, providing a number of relevant challenges that should be addressed in future research.

An active foot lifter orthosis based on a PCPG algorithm.

Central pattern generators (CPGs) are known to play an important role in the generation of rhythmic movements in gait, both in animals and humans. The comprehension of their underlying mechanism has led to the development of an important family of algorithms at the basis of autonomous walking robots. Recently, it has been shown that human gait could be modeled using a subclass of those algorithms, namely a Programmable Central Pattern Generator (PCPG). In this paper, we present a foot lifter orthosis driven by this algorithm. After a learning phase, the PCPG is able to generate adequate rhythmic gait patterns both for constant speeds and acceleration phases. Its output is used to drive the orthosis actuator during the swing phase, in order to help patients suffering from foot drop (the orthosis just follows the movement during the stance phase). The most interesting property of this algorithm is the possibility to generate a smooth output signal even during speed transitions. In practice, given that human gait is not perfectly periodic, the phase of this signal needs to be reset with actual movement. Therefore, two phase-resetting procedures were studied: one standard hard phase-resetting leading to discontinuities and one original soft phase-resetting allowing to recover the correct phase in a smooth way. The simulation results and complete design of the orthosis hardware and software are presented.