Anisotropic Evaporator with a T-Shape Design for High-Performance Solar-Driven Zero-Liquid Discharge.

Solar-driven evaporation is regarded as a sustainable wastewater treatment strategy for clean water recovery and salt condensation. However, achieving both high evaporation rate and long-term stability remain challenging due to poor thermal management and rapid salt accumulation and blocking. Here, a T-shape solar-driven evaporator, composed of a surface-carbonized longitudinal wood membrane (C-L-wood) is demonstrated as the top "" for solar harvesting/vapor generation/salt collection and another piece of natural L-wood as the support "" for brine transporting and thermally insulating. The horizontally aligned micro-channels of C-L-wood have a low perpendicular thermal conductivity and can effectively localize the thermal energy for rapid evaporation. Meanwhile, the brine is guided to transport from the support L-wood ("") to the centerline of the top evaporator and then toward the double edge (""), during which clean water is evaporated and salt is crystallized at the edge. The T-shape evaporator demonstrates a high evaporation rate of 2.43 kg m-2 h-1 under 1 sun irradiation, and is stable for 7 days of the outdoor operation, which simultaneously realizes clean water evaporation and salt collection (including Cu2+ , CrO42- , Co2+ ), and achieves zero-liquid discharge. Therefore, the T-shape design provides an effective strategy for high performance wastewater treatment.

Effect of pollutant source location on air pollutant dispersion around a high-rise building.

This article investigates the dispersion of airborne pollutants emitted from different locations near a high-rise building. A Computational Fluid Dynamics (CFD) model for simulating the wind flow field and the pollutant dispersion was developed and validated by wind tunnel data. Then the spreading of the pollutant emitted from different locations to a rectangular-shaped high-rise residential (HRR) building was numerically studied. The pollutant source location was set in a wide range of the position angle and distance between the source and the building. It was found that the pollutant concentration on the building decreases with an increase in the emission distance whereas the effect of the position angle is more complicated. Interestingly, there is a critical range of the position angle from which the emitted pollutants will not spread to the building in a significant way. The effect of the source location was linked to the wind flow field around the building, particularly with several major flows. The vertical distributions of the pollutant concentration on different faces were also investigated, and it was found that these are more affected by the vertical flow near each face. Finally, a mathematical model was developed to evaluate the pollutant concentration as a function of the emission distance and position angle. These findings are helpful to the understanding of the dispersion of airborne pollutants around high-rise buildings and the related hazard management in urban design.