Enhanced localized therapeutic precision: A face-to-face folate-targeted Cu2+-mediated nanotherapy with thermosensitive sustained-release system.

Safe and effective Cu2+ supplementation in local lesion is crucial for minimizing toxicity of DSF-based chemotherapy. Targeted delivery of Cu2+ appears more promising. Intraperitoneal chemotherapy for peritoneal carcinoma (PC) establishes "face-to-face" contact between targeted nanocarriers and tumor tissue. Herein, this study developed a biodegradable, injectable thermosensitive hydrogel that coencapsulating DSF submicroemulsion (DSF-SE) and folate-modified liposome loading glycyrrhizic acid-Cu (FCDL). FCDL acted as 'beneficial horse' to target the tumor-localized folate receptor, thus liberating Cu2+ in tumor nidus. The prepared FCDL and DSF-SE were found with uniform sizes (160.2 nm, 175.4 nm), low surface charge (-25.77 mV, -16.40 mV) and high encapsulation efficiency (97.93 %, 90.08 %). In vitro drug release profile of FCDL, DSF-SE and FCDL＆DSF-SE@G followed a sustained release pattern. And the release behavior of Cu2+ from FCDL was pH-related, i.e., Cu2+ was released faster under acidic condition. When FCDL and DSF-SE were loaded into an PLGA-PEG-PLGA-based hydrogel system, FCDL＆DSF-SE@G was formed to ensure separated delivery of Cu2+ and DSF in space but synchronized release over time. The rheology experiment showed a satisfactory gelling temperature of 32.7 °C. In vitro cytotoxicity study demonstrated that FCDL＆DSF-SE@G significantly lowered the IC50 of free Cu2+/DSF, Cu2+/DSF hydrogel and non-targeted analogue by almost 70 %, 65 % and 32 %, respectively. Accordingly, in tumor-bearing mice, FCDL＆DSF-SE@G augmented the tumor inhibition rates for the same formulations by 352 %, 145 % and 44 %, respectively. The main mechanism was attributed to higher uptake of FCDL and DSF-SE, resulting in increased Cu(DDTC)2 formation, ROS production and cell apoptosis. In conclusion, this targeted nanotherapy approach with dual-nanocarriers loaded hydrogel system, with its focus on face-to-face contact between nanocarriers and tumor tissues in the peritoneal cavity, holds significant promise for intraperitoneal chemotherapy in PC.

Nanocrystal-Loaded Lipid Carriers for Improved Oral Absorption and Anticancer Efficacy of Etoposide: Formulation Development, Transport Mechanism, In Vitro and In Vivo Evaluation.

To improve the oral absorption and anticancer efficacy of the BCS-IV drug etoposide (ETO), oral nanocrystal-loaded lipid carriers (Lipo@NCs) were developed in this study by modifying the BCS-IV drug nanocrystal with the lipid bilayer. The ETO-Lipo@NCs were prepared by the thin film hydration high-pressure homogenization method, and the core of positively charged ETO nanocrystals was prepared by the sonoprecipitation-high pressure homogenization method. The optimized ETO-Lipo@NCs were spherical particles with an average particle size of 220.3 ± 14.2 nm and a zeta potential of -9.95 ± 0.81 mV, respectively. The successful coating of a lipid bilayer on the surface of nanocrystals in ETO-Lipo@NCs was confirmed by several characterization methods. Compared to nanocrystals, the release rate and degree of Lipo@NCs in SIF were significantly decreased, indicating that the lipid bilayer can effectively prevent the rapid dissolution of core nanocrystals. ETO-Lipo@NCs demonstrated a significant improvement in the intestinal permeability and absorption of ETO in a single intestinal perfusion experiment. In the cells, ETO-Lipo@NCs showed enhanced cellular uptake and transepithelial transport compared with ETO nanocrystals. Pharmacokinetic analysis indicated that ETO-Lipo@NCs had a longer plasma half-life than ETO solution, and the oral bioavailability of ETO-Lipo@NCs was 1.96- and 10.92-fold higher than that of ETO nanocrystals and ETO coarse crystals, respectively. Moreover, the ETO-Lipo@NCs orally dosed at 10 mg/kg exhibited an excellent inhibitory effect against tumors in a subcutaneous Lewis lung carcinoma (LLC) xenograft model compared with other preparations. These results indicate that the Lipo@NCs formulation has an oral absorption-promoting effect of the BCS-IV drug ETO, which could warrant further application in the oral delivery of other poorly bioavailable drugs.

Synergistic Antitumor Efficacy Mediated by Liposomal Co-Delivery of Polymeric Micelles of Vinorelbine and Cisplatin in Non-Small Cell Lung Cancer.

PURPOSE: Non-small cell lung cancer (NSCLC) is an aggressive tumor with high mortality and poor prognosis. In this study, we designed a liposome encapsulating polymeric micelles (PMs) loaded with vinorelbine (NVB) and cis-diamminedichloroplatinum (II) (cisplatin or CDDP) for the treatment of NSCLC. MATERIALS AND METHODS: Sodium poly(α-l-glutamic acid)-graft-methoxy-polyethylene glycol (PLG-G-PEG5K) was used to prepare NVB-loaded NVB-PMs and CDDP-loaded CDDP-PMs that were co-encapsulated into liposomes by a reverse evaporation method, yielding NVB and CDDP co-delivery liposomes (CoNP-lips) composed of egg phosphatidyl lipid-80/cholesterol/DPPG/DSPE-mPEG2000 at a molar ratio of 52:32:14:2. The CoNP-lips were characterized in terms of particle size, zeta potential, drug content, encapsulation efficiency, and structural properties. Drug release by the CoNP-lips as well as their stability and cytotoxicity was evaluated in vitro, and their antitumor efficacy was assessed in a mouse xenograft model of Lewis lung carcinoma cell-derived tumors. RESULTS: CoNP-lips had a spherical shape with uniform size distribution; the average particle size was 162.97±9.06 nm, and the average zeta potential was -13.02±0.22 mV. In vitro cytotoxicity analysis and the combination index demonstrated that the CoNP-lips achieved a synergistic cytotoxic effect at an NVB:CDDP weight ratio of 2:1 in an NSCLC cell line. There was sustained release of both drugs from CoNP-lips. The pharmacokinetic analysis showed that CoNP-lips had a higher plasma half-life than NP solution, with 6.52- and 8.03-fold larger areas under the receiver operating characteristic curves of NVB and CDDP. CoNP-lips showed antitumor efficacy in tumor-bearing C57BL/6 mice and drug accumulation in tumors via the enhanced permeability and retention effect. CONCLUSION: CoNP-lips are a promising formulation for targeted therapy in NSCLC.

Etoposide Amorphous Nanopowder for Improved Oral Bioavailability: Formulation Development, Optimization, in vitro and in vivo Evaluation.

INTRODUCTION: Etoposide refers to a derivative of podophyllotoxin, which plays an important role in the treatment of cancer due to its prominent anti-tumor effect. As a BCS IV drug, etoposide exhibits insufficient aqueous solubility and permeability, thereby limiting its oral absorption. To enhance the oral bioavailability of etoposide, this study developed an amorphous nanopowder. METHODS: Based on preliminary screening and experimental design, the stabilizer and preparation process of etoposide nanosuspension were explored. Subsequently, using a Box-Behnken design, the effects of independent factors (ultrasonication time, ratio of two phases and stabilizer concentration) on response variables (particle size and polydispersity index) were studied, and then the formulation was optimized. Finally, nanosuspension was further freeze dried with 1% of mannitol resulting in the formation of etoposide amorphous nanopowder. RESULTS: The optimized etoposide nanopowder showed as spherical particles with an average particle size and polydispersity index of 211.7 ± 10.4 nm and 0.125 ± 0.028. X-ray powder diffraction and differential scanning calorimetry confirmed the ETO in the nanopowder was amorphous. Compared with coarse powder and physical mixture, etoposide nanopowder achieved significantly enhanced saturated solubility and dissolution in various pH environments. The Cmax and AUC0-t of etoposide nanopowder after oral administration in rats were respectively 2.21 and 2.13 times higher than the crude etoposide suspension. Additionally, the Tmax value of nanopowder was 0.25 h, compared with 0.5 h of reference group. DISCUSSION: In the present study, the optimized amorphous nanopowder could significantly facilitate the dissolution and oral absorption of etoposide and might act as an effective delivery method to enhance its oral bioavailability.

Simultaneous Determination of Six Active Components in Oviductus Ranae via Quantitative Analysis of Multicomponents by Single Marker.

A method, quantitative analysis of multicomponents by single marker (QAMS), was established in this article to investigate the quality control of a traditional Chinese medicine, Oviductus Ranae. 7-Hydroxycholesterol, 7-ketocholesterol, 4-cholesten-3-one, stigmasterol, 7-dehydrocholesterol, and cholesterol were selected as the indexes of quality evaluation of Oviductus Rana. The determination was achieved on an Agilent HC-C18 column (4.6 mm × 250 mm, 5 µm) using methanol with water (87 : 13 v/v) as mobile phase at the flow rate of 2.0 mL/min. Cholesterol was used as an internal standard to determine the relative correction factors between cholesterol and other steroidal constituents in Oviductus Ranae. The contents of those steroidal constituents were calculated at the same time. To evaluate the QAMS method, an external standard method was used to determine the contents of six steroidal constituents. No significant difference was observed when comparing the quantitative results of QAMS with the results of external standard method. The proposed QAMS method was proved to be accurate and feasible based on methodological experiments. QAMS provided a simple, efficient, economical, and accurate way to control the quality of Oviductus Ranae.

Prescription Optimization and Oral Bioavailability Study of Salvianolic Acid Extracts W/O/W Multiple Emulsion.

The purpose of this study is to develop a new method of preparing salvianolic acid extracts (SAE) water-in-oil-in-water (W/O/W) multiple emulsion (ME). SAE injection is used in the treatment of brain infarct and promotion of blood circulation in China. However, the injection is not convenient, and the oral preparation has poor bioavailability. Hence, a new preparation that is convenient and stable with good biological availability is required. SAE ME was prepared by two-step emulsification method. Combined with single-factor investigation and orthogonal test, the embedding rate and centrifugal retention rate were taken as the comprehensive indexes to optimize the formulation of SAE ME. The ME size was tested by laser particle size analyzer. The pharmacokinetic studies were conducted in Sprague-Dawley rats with HPLC-MS/MS method. The blood coagulation and hemorheology tests were conducted to assess the effect of preparation in rats. The best preparation technique for SAE ME is by the use of trospium chloride; SAE represent 12% of water in the phase, lipophilic emulsifier hydrophilic lipophilic balance value=4.3, lipophilic emulsifier is 20% of the oil phase. The median diameter of particle is (0.608±0.05) µm and the Cmax of ME is 3-fold higher compared to Cmax of free drug. The oral biavailability of ME is 26.71-fold higher than that of free drug with good effect on blood circulation. SAE ME is stable hence, improves the biological availability and slows down drug release.

Formulation, development, and optimization of a novel octyldodecanol-based nanoemulsion for transdermal delivery of ceramide IIIB.

This research aimed to develop and optimize a nanoemulsion-based formulation containing ceramide IIIB using phase-inversion composition for transdermal delivery. The effects of ethanol, propylene glycol (PG), and glycerol in octyldodecanol and Tween 80 systems on the size of the nanoemulsion region in the phase diagrams were investigated using water titration. Subsequently, ceramide IIIB loading was kept constant (0.05 wt%), and the proposed formulation and conditions were optimized via preliminary screening and experimental design. Factors such as octyldodecanol/(Tween 80:glycerol) weight ratio, water content, temperature, addition rate, and mixing rate were investigated in the preliminary screening experiment. Response surface methodology was employed to study the effect of water content (30%-70%, w/w), mixing rate (400-720 rpm), temperature (20°C-60°C), and addition rate (0.3-1.8 mL/min) on droplet size and polydispersity index. The mathematical model showed that the optimum formulation and conditions for preparation of ceramide IIIB nanoemulsion with desirable criteria were a temperature of 41.49°C, addition rate of 1.74 mL/min, water content of 55.08 wt%, and mixing rate of 720 rpm. Under optimum formulation conditions, the corresponding predicted response values for droplet size and polydispersity index were 15.51 nm and 0.12, respectively, which showed excellent agreement with the actual values (15.8 nm and 0.108, respectively), with no significant (P>0.05) differences.

Salting-out homogenous extraction followed by ionic liquid/ionic liquid liquid-liquid micro-extraction for determination of sulfonamides in blood by high performance liquid chromatography.

Salting-out homogenous extraction followed by ionic liquid/ionic liquid dispersive liquid-liquid micro-extraction system was developed and applied to the extraction of sulfonamides in blood. High-performance liquid chromatography was applied to the determination of the analytes. The blood sample was centrifuged to obtain the serum. After the proteins in the serum were removed in the presence of acetonitrile, ionic liquid 1-butyl-3-methylimidazolium tetrafluoroborate, dipotassium hydrogen phosphate, ionic liquid 1-Hexyl-3-methylimidazolium hexafluorophosphate were added into the resulting solution. After the resulting mixture was ultrasonically shaken and centrifuged, the precipitate was separated. The acetonitrile was added in the precipitate and the analytes were extracted into the acetonitrile phase. The parameters affecting the extraction efficiency, such as volume of ionic liquid, amount of dipotassium hydrogen phosphate, volume of dispersant, extraction time and temperature were investigated. The limits of detection of sulfamethizole (STZ), sulfachlorpyridazine (SCP), sulfamethoxazole (SMX) and Sulfisoxazole (SSZ) were 4.78, 3.99, 5.21 and 3.77µgL-1, respectively. When the present method was applied to the analysis of real blood samples, the recoveries of analytes ranged from 90.0% to 113.0% and relative standard deviations were lower than 7.2%.

[Genetic susceptibility in children with incomplete Kawasaki disease].

OBJECTIVE: To study the frequency distribution of single nucleotide polymorphisms (SNPs) in two genes associated with incomplete Kawasaki disease (KD) (rs1569723 in CD40 gene and rs2736340 in BLK gene), and to investigate its association with the genetic susceptibility and clinical phenotypes of incomplete KD. METHODS: A total of 184 children with incomplete KD and 203 normal children were recruited to carry out a case-control study. The genotypes of SNPs in CD40 gene and BLK gene were determined using polymerase chain reaction-restriction fragment length polymorphism. The frequency distribution of genotypes was compared between the KD and control groups. The association between gene polymorphisms and clinical features of incomplete KD was analyzed. RESULTS: There were no significant differences in genotype (AA, AC, CC) and allele frequencies in CD40 SNP rs1569723 between the KD and control groups. There were significant differences in the frequency distribution of three genotypes (TT, CT, CC) in BLK SNP rs2736340 between the KD and control groups (P=0.031), and the KD group had a significantly higher frequency of T allele than the control group (P=0.007). There were significant differences in the incidence of conjunctival hyperaemia among the patients with different genotypes (rs1569723 in CD40 gene) (P=0.036). The SNP rs2736340 in BLK gene was associated with the extremity changes in KD patients (P=0.017). CONCLUSIONS: The SNP rs2736340 in BLK gene is associated with the susceptibility to incomplete KD, and the SNP rs1569723 in CD40 gene and SNP rs2736340 in BLK gene are associated with some of clinical phenotypes of incomplete KD.

PSMA ligand conjugated PCL-PEG polymeric micelles targeted to prostate cancer cells.

In this content, a small molecular ligand of prostate specific membrane antigen (SMLP) conjugated poly (caprolactone) (PCL)-b-poly (ethylene glycol) (PEG) copolymers with different block lengths were synthesized to construct a satisfactory drug delivery system. Four different docetaxel-loaded polymeric micelles (DTX-PMs) were prepared by dialysis with particle sizes less than 60 nm as characterized by dynamic light scattering (DLS) and transmission electron microscope (TEM). Optimization of the prepared micelles was conducted based on short-term stability and drug-loading content. The results showed that optimized systems were able to remain stable over 7 days. Compared with Taxotere, DTX-PMs with the same ratio of hydrophilic/hydrophobic chain length displayed similar sustained release behaviors. The cytotoxicity of the optimized targeted DTX-PCL12K-PEG5K-SMLP micelles (DTX-PMs2) and non-targeted DTX-PCL12K-mPEG5K micelles (DTX-PMs1) were evaluated by MTT assays using prostate specific membrane antigen (PSMA) positive prostate adenocarcinoma cells (LNCaP). The results showed that the targeted micelles had a much lower IC50 than their non-targeted counterparts (48 h: 0.87 ± 0.27 vs 13.48 ± 1.03 µg/ml; 72 h: 0.02 ± 0.008 vs 1.35 ± 0.54 µg/ml). In vitro cellular uptake of PMs2 showed 5-fold higher fluorescence intensity than that of PMs1 after 4 h incubation. According to these results, the novel nano-sized drug delivery system based on DTX-PCL-PEG-SMLP offers great promise for the treatment of prostatic cancer.

Self-assembled micelles composed of doxorubicin conjugated Y-shaped PEG-poly(glutamic acid)2 copolymers via hydrazone linkers.

In this work, micelles composed of doxorubicin-conjugated Y-shaped copolymers (YMs) linked via an acid-labile linker were constructed. Y-shaped copolymers of mPEG-b-poly(glutamate-hydrazone-doxorubicin)2 and linear copolymers of mPEG-b-poly(glutamate-hydrazone-doxorubicin) were synthesized and characterized. Particle size, size distribution, morphology, drug loading content (DLC) and drug release of the micelles were determined. Alterations in size and DLC of the micelles could be achieved by varying the hydrophobic block lengths. Moreover, at fixed DLCs, YMs showed a smaller diameter than micelles composed of linear copolymers (LMs). Also, all prepared micelles showed sustained release behaviors under physiological conditions over 72 h. DOX loaded in YMs was released more completely, with 30% more drug released in acid. The anti-tumor efficacy of the micelles against HeLa cells was evaluated by MTT assays, and YMs exhibited stronger cytotoxic effects than LMs in a dose- and time-dependent manner. Cellular uptake studied by CLSM indicated that YMs and LMs were readily taken up by HeLa cells. According to the results of this study, doxorubicin-conjugated Y-shaped PEG-(polypeptide)2 copolymers showed advantages over linear copolymers, like assembling into smaller nanoparticles, faster drug release in acid, which may correspond to higher cellular uptake and enhanced extracellular/intracellular drug release, indicating their potential in constructing nano-sized drug delivery systems.

Daidzein suppresses pro-inflammatory chemokine Cxcl2 transcription in TNF-α-stimulated murine lung epithelial cells via depressing PARP-1 activity.

AIM: Daidzein (4',7-dihydroxyisoflavone) is an isoflavone exiting in many herbs that has shown anti-inflammation activity. The aim of this study was to investigate the mechanism underlying its anti-inflammatory action in murine lung epithelial cells. METHODS: C57BL/6 mice were intranasally exposed to TNF-α to induce lung inflammation. The mice were injected with daidzein (400 mg/kg, ip) before TNF-α challenge, and sacrificed 12 h after TNF-α challenge, and lung tissues were collected for analyisis. In in vitro studies, murine MLE-12 epithelial cells were treated with TNF-α (20 ng/mL). The expression of pro-inflammatory chemokine Cxcl2 mRNA and NF-κB transcriptional activity were examined using real-time PCR and a dual reporter assay. Protein poly-adenosine diphosphate-ribosylation (PARylation) was detecyed using Western blotting and immunoprecipitation assays. RESULTS: Pretreatment of the mice with daidzein markedly attenuated TNF-α-induced lung inflammation, and inhibited Cxcl2 expression in lung tissues. Furthermore, daidzein (10 µmol/L) prevented TNF-α-induced increases in Cxcl2 expression and activity and NF-κB transcriptional activity, and markedly inhibited TNF-α-induced protein PARylation in MLE-12 cells in vitro. In MLE-12 cells co-transfected with the PARP-1 expression plasmid and NF-κB-luc (or Cxcl2-luc) reporter plasmid, TNF-α markedly increased NF-κB (or Cxcl2) activation, which were significantly attenuated in the presence of daidzein (or the protein PARylation inhibitor PJ 34). PARP-1 activity assay showed that daidzein (10 µmol/L) reduced the activity of PARP-1 by ∼75%. CONCLUSION: The anti-inflammatory action of daidzein in murine lung epithelial cells seems to be mediated via a direct interaction with PARP-1, which inhibits RelA/p65 protein PARylation required for the transcriptional modulation of pro-inflammatory chemokines such as Cxcl2.

Determination of genkwanin in rat plasma by liquid chromatography-tandem mass spectrometry: application to a bioavailability study.

We developed and validated a sensitive, rapid, and specific liquid chromatography tandem mass spectrometry method to determine genkwanin in rat plasma. Genistein was used as the internal standard. After liquid-liquid extraction with ethyl acetate, the chromatographic separation of genkwanin was achieved by using a reversed-phase HPLC using Agela Venusil MP-C18 analytical column (2.1 mm × 50 mm, 5 µm particles) with a mobile phase of methanol (A)-water (B) (65:35, v/v) containing 5mM ammonium acetate and 0.1% formic acid. The detection was performed by negative ion electrospray ionization in multiple-reaction monitoring mode by using transitions of m/z 283.1→268.1 and m/z 269.1→133.0 for genkwanin and IS, respectively. Good linearity was observed in the concentration range of 3.84 ng/ml to 3,840 ng/ml (r(2)>0.99), and the lower limit of quantification was 3.84 ng/ml in 100 µl of rat plasma. The intra- and inter-day accuracy and precision of genkwanin were both within acceptable limits. This present method was successfully applied to a pharmacokinetic study of genkwanin in rats following oral (50mg/kg) and intravenous (5mg/kg) administration. For the oral administration group, the maximum mean concentration of genkwanin in plasma (Cmax, 36.9 ± 9.4 ng/ml) was achieved at 3.83 ± 1.33 h (Tmax), and the area under the plasma concentration versus time curve from 0 h to 12h (AUC0-12h) was 218 ± 40 ngh/ml. For the intravenous administration group, essential pharmacokinetic parameters such as Cmax (1,755 ± 197 ng/ml) and AUC0-12h (2,349 ± 573 ngh/ml) were shown. The result showed that the compound was poorly absorbed with an absolute bioavailability of approximately 1.1%.

Clarithromycin-loaded liposomes offering high drug loading and less irritation.

The aim of this study was to develop an efficient method of preparing less irritant clarithromycin-loaded liposomes (CLA-Lip) for injection with a high drug loading and to evaluate their physicochemical characteristics before and after lyophilization. CLA-Lip were prepared using the film-dispersion method with sodium cholesterol sulfate (SCS) and n-hexyl acid as the regulators and then lyophilized. The liposomes were characterized in terms of their size, size distribution, zeta potential, morphology, in vitro release, haemolysis, and lyophilization and irritation testing was carried out. The TEM images revealed that the structure of the CLA-Lip were multilamellar and of a regular size of around 100 nm. In addition, the lyophilized CLA-Lip were characterized by DSC and Infrared spectroscopy to confirm the structure. H-bonding and salt-forming reactions were used to ensure that clarithromycin (CLA) was stably encapsulated in the liposomes. This method provided a 30-fold increase in the concentration of clarithromycin relative to that in aqueous solution. Sucrose was found to be the best protective agent and was added in an amount of 12.5% (w/v). According to the mouse scratch test and the rat paw lick test, the pain of CLA-Lip was significantly reduce by approximately 80% compared with the solution of clarithromycin phosphate. In addition, rabbit ear vein experiments produced similar results. These findings suggested that CLA-Lip was a stable delivery system with less irritation, which should be extremely suitable for clinical application.

Fluoride-induced oxidative stress of osteoblasts and protective effects of baicalein against fluoride toxicity.

The key role of osteoblasts in skeletal fluorosis makes the exploration of the possible mechanisms of the fluoride-induced oxidative stress of osteoblasts of great importance. In this article, the in vitro effects of fluoride on the oxidative stress of osteoblasts are presented. To study the inhibitory effect of baicalein on the oxidative stress of osteoblasts, the antioxidant activity of baicalein was evaluated for osteoblasts exposed to fluoride. Calvarial osteoblasts were prepared and respectively treated with alpha-MEM (5% calf serum) containing 0.5, 1.0, 2.0, 4.0, 8.0, 12.0, and 20.0 mg/L fluoride for 48 h. Baicalein (10 micromol/L) was added to the cells for the same period of time as that of the fluoride treatment. Low concentrations of fluoride (0.5-2 mg F-/L) stimulated the mitochondrial activity of osteoblasts and produced significant reaction to the oxidative stress, whereas high concentrations of fluoride (>or=12 mg F-/L) inhibited cell proliferation and the activity of antioxidant enzymes. This suggests that the oxidative stress induced by low concentrations of fluoride might mediate or participate in the process of fluoride inducing the proliferation of osteoblasts. The viability of osteoblasts in the high concentrations of fluoride with the addition of 10 mumol/L baicalein (>or=12 mg/L) was higher than those of the same level of fluoride- treated groups without the addition of baicalein. The protective role of baicalein is obvious as an inhibitor of lipid peroxidation against the damage induced by the high concentration of fluoride.

Effect of sodium fluoride on the expression of bcl-2 family and osteopontin in rat renal tubular cells.

Our earlier studies showed that the apoptosis of renal tubules can be induced by sodium fluoride (NaF). The present study was designed to estimated the effects of B-cell lymphoma/leukemia 2 (Bcl-2), Bcl-2-associated protein X (Bax), and osteopontin (OPN) on the apoptosis of renal tubular cells induced by NaF at different levels. The technique of reverse transcription-polymerase chain reaction and densitometer scanning volume density were used to evaluate the changes of Bcl-2, Bax, and OPN mRNA in tubular cells treated with different doses of NaF (0, 1, 5, 7.5, 12.5 mgF-/L) for 48 h. Compared to control, the level of Bax mRNA significantly increased at cells of the 7.5- and 12.5-mg F-/L groups and the expression of Bcl-2 mRNA obviously decreased at cells of the 5- and 7.5-mg F-/L groups. The NaF also enhanced the expression of OPN mRNA in a dose-dependent manner, but the strongest expression of OPN mRNA was observed at cells of the 7.5-mg F-/L group. The results suggested that NaF induces the apoptosis in renal tubules via activation of the Bax expression and Bcl-2 suppression; OPN probably acts as protective role against apoptosis in fluoride-treated renal cells.

[Study on purification of total peony glycoside with D140 macroporous resin].

OBJECTIVE: To study the extraction process of total peony glycoside from Paeonia veitchii Lynvh. METHODS: The extraction process of total peony glycoside with D140 macroporous resin adsorbent was selected with different condence of ethanol for gradient elution. RESULTS: The optimum condence was 35% ethanol. CONCLUSION: The extraction ratio of paeoniflorin was >50%, and the extraction process is simple and convenient. The regenaration of resin is easy, this method is advisible.