ABSTRACT
Iron phosphate-based coating and iron silicate-based coating were used to inhibit the oxidation of sulfide minerals in rainy and submerged environments. The inhibiting effectiveness of coating agents on the oxidation of iron sulfide minerals was investigated using pyrite and rock samples resulting from acid drainage. The film formed with both surface-coating agents was identified by pyrite surface analysis. It was also confirmed that the formation of coatings varies depending on the crystallographic orientation. The inhibitory effects under rainy and submerged conditions were investigated using column experiments. Submerged conditions accelerated deterioration compared to that under rainy conditions. Iron phosphate coating had a significantly better oxidation-inhibitory effect (84.86-98.70%) than iron silicate coating (56.80-92.36%), and at a concentration of 300 mM, H+ elution was inhibited by more than 90% throughout the experiment. Furthermore, methods for effective film formation were investigated in terms of producing Fe3+; (1) application of coating agents mixed with oxidant (H2O2), (2) application of coating agent after the use of the oxidant. In a rainy environment, applying iron phosphate-based coating using the sequential method showed oxidation inhibition effects for cycles 1-9, whereas applying the mixed material showed effects for cycles 9-13. The use of a surface-coating agent after applying an oxidant did not inhibit oxidation. The surface coating agent and the oxidizing agent should be applied as a mixture to form a film.
Subject(s)
Iron , Oxidation-Reduction , Phosphates , Silicates , Silicates/chemistry , Iron/chemistry , Phosphates/chemistry , Acid Rain , Sulfides/chemistry , Hydrogen Peroxide/chemistry , Ferric Compounds/chemistryABSTRACT
With rising of harmful algae blooming and toxin exposure, practical utilization of harmful algae has been developed. This work aimed to magnetically harvest Microcystis aeruginosa (MA) using iron oxides and investigate the feasibility of algae/iron oxides mixture as feedstock in pyrolytic platform to produce syngas and metal biochar. Carbon dioxide (CO2) was used as a feeding gas to enhance the production efficiency of syngas and also functioned pH controller for better MA harvesting and toxin removal. CO2 support brought multiple benefits: magnetite (Fe3O4) and maghemite (γ-Fe2O3) recovered MA in a relatively short period of time (â¼1 min), the recovered biomass generated 34-fold increased carbon monoxide, and metal biochar adsorbed higher amount of toxin from MA (2.8-fold). Pyrolytic utilization of harmful algae supported by CO2 and iron oxides could be one of promising techniques for evolution of metal biochar to remove toxin, while efficiently recover biomass and enhance syngas production.
Subject(s)
Carbon Dioxide , Microcystis , Biomass , Carbon Monoxide , Metals , IronABSTRACT
Nano Fe(III) oxide (FO) was used as an amendment material in CO2-assisted pyrolysis of spent coffee grounds (SCG) and its impacts on the syngas (H2 & CO) generation and biochar adsorptive properties were investigated. Amendment of FO led to 153 and 682% increase of H2 and CO in pyrolytic process of SCG, respectively, which is deemed to arise from enhanced thermal cracking of hydrocarbons and oxygen transfer reaction mediated by FO. Incorporation of FO successfully created porous structure in the produced biochar. The adsorption tests revealed that the biochar exhibited bi-functional capability to remove both positively charged Cd(II) and Ni(II), and negatively charged Sb(V). The adsorption of Cd(II) and Ni(II) was hardly deteriorated in the multiple adsorption cycles, and the adsorption of Sb(V) was further enhanced through formation of surface ternary complexes. The overall results demonstrated nano Fe(III) oxide is a promising amendment material in CO2-assisted pyrolysis of lignocellulosic biomass for enhancing syngas generation and producing functional biochar.
Subject(s)
Coffee , Oxides , Coffee/chemistry , Carbon Dioxide/chemistry , Adsorption , Pyrolysis , Cadmium , Charcoal/chemistry , MetalsABSTRACT
An in-situ CO(2) sequestration method using coal ash ponds located in coastal regions is proposed. The CO(2) sequestration capacity of coal fly ash (CFA) by mineral carbonation was evaluated in a flow-through column reactor under various conditions (solid dosage: 100-330 g/L, CO(2) flow rate: 20-80 mL/min, solvent type: deionized (DI) water, 1 M NH(4)Cl solution, and seawater). The CO(2) sequestration tests were conducted on CFA slurries using flow-through column reactors to simulate more realistic flow-through conditions. The CO(2) sequestration capacity increased when the solid dosage was increased, whereas it was affected insignificantly by the CO(2) flow rate. A 1 M NH(4)Cl solution was the most effective solvent, but it was not significantly different from DI water or seawater. The CO(2) sequestration capacity of CFA under the flow-through conditions was approximately 0.019 g CO(2)/g CFA under the test conditions (solid dosage: 333 g/L, CO(2) flow rate: 40 mL/min, and solvent: seawater).
Subject(s)
Air Pollutants/isolation & purification , Air Pollution/prevention & control , Carbon Dioxide/isolation & purification , Coal Ash/chemistry , Environmental Restoration and Remediation , Waste Products , Air Pollutants/analysis , Air Pollution/analysis , Carbon Dioxide/analysis , Environmental Restoration and Remediation/instrumentation , Environmental Restoration and Remediation/methods , Equipment Design , Microscopy, Electron, Scanning , Models, Theoretical , Surface Properties , Thermogravimetry , X-Ray DiffractionABSTRACT
Carbonation efficiency was evaluated for three cementitious materials having different CaO-bearing minerals (lime, Portland cement and waste concrete) using various extraction reagents (HCl, CH3COOH, NH4Cl and deionized water). The cementitious materials were subjected to Ca extraction and carbonation tests under ambient pressure and temperature conditions. The Ca extraction efficiency generally decreased in the order lime, Portland cement and waste concrete, regardless of the extraction solution. Among the extraction solutions, NH4Cl was the most effective for Ca extraction and carbonation. The results of this study suggest that the types of extraction solution and CaO-bearing mineral of the materials are primary factors affecting carbonation efficiency.