A novel instrument for generating angular increments of 1 nanoradian.

Accurate generation of small angles is of vital importance for calibrating angle-based metrology instruments used in a broad spectrum of industries including mechatronics, nano-positioning, and optic fabrication. We present a novel, piezo-driven, flexure device capable of reliably generating micro- and nanoradian angles. Unlike many such instruments, Diamond Light Source's nano-angle generator (Diamond-NANGO) does not rely on two separate actuators or rotation stages to provide coarse and fine motion. Instead, a single Physik Instrumente NEXLINE "PiezoWalk" actuator provides millimetres of travel with nanometre resolution. A cartwheel flexure efficiently converts displacement from the linear actuator into rotary motion with minimal parasitic errors. Rotation of the flexure is directly measured via a Magnescale "Laserscale" angle encoder. Closed-loop operation of the PiezoWalk actuator, using high-speed feedback from the angle encoder, ensures that the Diamond-NANGO's output drifts by only ∼0.3 nrad rms over ∼30 min. We show that the Diamond-NANGO can reliably move with unprecedented 1 nrad (∼57 ndeg) angular increments over a range of >7000 µrad. An autocollimator, interferometer, and capacitive displacement sensor are used to independently confirm the Diamond-NANGO's performance by simultaneously measuring the rotation of a reflective cube.

Fluorogenic cephalosporin substrates for ß-lactamase TEM-1.

Cephalosporin was used to synthesize soluble and precipitating fluorogenic ß-lactam substrates that demonstrated differential catalytic hydrolysis by three different subtypes of ß-lactamase: TEM-1 (class A), p99 (class C), and a Bacillus cereus enzyme sold by Genzyme (class B). The most successful soluble substrate contained difluorofluorescein (Oregon Green 488) ligated to two cephalosporin moieties that, therefore, required two turnovers to produce the fluorescent Oregon Green 488 leaving group. The bis-cephalosporin modification was required so that the final reaction product was the Oregon Green 488 carboxylic acid rather than a less bright phenolic adduct of the dye. Hydrolysis in pH 5.5 Mes and pH 7.2 phosphate-buffered saline (PBS) buffers was similar, but in pH 8.0 Tris the hydrolysis rate nearly doubled. Activity of the ß-lactamases on the various substrates was shown to depend highly on the linker between the cephalosporin and the fluorophore, with an allyl linker promoting faster turnover than a phenol ether linker. Measured K(m) values for dichlorofluorescein and difluorofluorescein cephalosporin substrates were approximately the same as K(m) values for penicillin G and ampicillin found in the literature (~30-40µM).

Labeling of multiple HIV-1 proteins with the biarsenical-tetracysteine system.

Due to its small size and versatility, the biarsenical-tetracysteine system is an attractive way to label viral proteins for live cell imaging. This study describes the genetic labeling of the human immunodeficiency virus type 1 (HIV-1) structural proteins (matrix, capsid and nucleocapsid), enzymes (protease, reverse transcriptase, RNAse H and integrase) and envelope glycoprotein 120 with a tetracysteine tag in the context of a full-length virus. We measure the impact of these modifications on the natural virus infection and, most importantly, present the first infectious HIV-1 construct containing a fluorescently-labeled nucleocapsid protein. Furthermore, due to the high background levels normally associated with the labeling of tetracysteine-tagged proteins we have also optimized a metabolic labeling system that produces infectious virus containing the natural envelope glycoproteins and specifically labeled tetracysteine-tagged proteins that can easily be detected after virus infection of T-lymphocytes. This approach can be adapted to other viral systems for the visualization of the interplay between virus and host cell during infection.

Fluorometric assay for quantitation of biotin covalently attached to proteins and nucleic acids.

As a component of the (strept)avidin affinity system, biotin is often covalently linked to proteins or nucleic acids. We describe here a microplate-based high-throughput fluorometric assay for biotin linked to either proteins or nucleic acids based on fluorescence resonance energy transfer (FRET). This assay utilizes a complex of Alexa Fluoro 488 dye-labeled avidin with a quencher dye, 2-(4'-hydroxyazobenzene) benzoic acid (HABA), occupying the biotin binding sites of the avidin. In the absence of biotin, HABA quenches the fluorescence emission of the Alexa Fluor 488 dyes via FRET HABA is displaced when biotin binds to the Alexa Fluor 488 dye-labeled avidin, resulting in decreased FRET efficiency. This mechanism results in an increase in fluorescence intensity directly related to the amount of biotin present in the sample. The assay is able to detect as little as 4 pmol biotin in a 0.1 mL volume within 15 min of adding sample to the reagent, with a Z-factor > 0.9.

An ultrasensitive, continuous assay for xylanase using the fluorogenic substrate 6,8-difluoro-4-methylumbelliferyl beta-D-xylobioside.

We describe a fluorescence-based assay for the analysis of xylanase activity using a novel fluorogenic substrate, 6,8-difluoro-4-methylumbelliferyl beta-D-xylobioside (DiFMUX(2)). Generation of fluorescent 6,8-difluoro-4-methylumbelliferone (DiFMU) from the substrate corresponded directly to xylanase activity. High-performance liquid chromatography analysis of the digestion products showed that xylanase hydrolyzed DiFMUX(2) directly to DiFMU and xylobiose. The assay provides the speed, sensitivity, and convenience required for measuring xylanase activity or for screening xylanase inhibitors in a high-throughput format and is suitable for the kinetic assay of xylanases from a variety of sources.

Visualizing morphogenesis in transgenic zebrafish embryos using BODIPY TR methyl ester dye as a vital counterstain for GFP.

Green fluorescent protein (GFP) technology is rapidly advancing the study of morphogenesis, by allowing researchers to specifically focus on a subset of labeled cells within the living embryo. However, when imaging GFP-labeled cells using confocal microscopy, it is often essential to simultaneously visualize all of the cells in the embryo using dual-channel fluorescence to provide an embryological context for the cells expressing GFP. Although various counterstains are available, part of their fluorescence overlaps with the GFP emission spectra, making it difficult to clearly identify the cells expressing GFP. In this study, we report that a new fluorophore, BODIPY TR methyl ester dye, serves as a versatile vital counterstain for visualizing the cellular dynamics of morphogenesis within living GFP transgenic zebrafish embryos. The fluorescence of this photostable synthetic dye is spectrally separate from GFP fluorescence, allowing dual-channel, three-dimensional (3D) and four-dimensional (4D) confocal image data sets of living specimens to be easily acquired. These image data sets can be rendered subsequently into uniquely informative 3D and 4D visualizations using computer-assisted visualization software. We discuss a variety of immediate and potential applications of BODIPY TR methyl ester dye as a vital visualization counterstain for GFP in transgenic zebrafish embryos.

A fluorescent high-throughput assay for double-stranded DNA: the RediPlate PicoGreen assay.

The fluorescent PicoGreen reagent for detection and quantitation of double-stranded DNA has been adapted for high-throughput screening: the RediPlate PicoGreen double-stranded DNA assay format. In the RediPlate PicoGreen assay format, the PicoGreen reagent is predistributed and co-dried into either 96- or 384-well microplates with the excipient trehalose. The user resuspends the dried reagents upon adding DNA, and measures the resulting fluorescence after a five minute incubation. Replicate fluorescence measurements on nominally identical wells have less than a 5% coefficient of variation. The assay is linear from 5 to 500 ng/ml DNA in a 200 micro l volume. The RediPlate PicoGreen assay format retains the advantages of the original PicoGreen reagent - sensitivity, speed, and specificity - but in a high-throughput format.

Development of fluorescence-based selective assays for serine/threonine and tyrosine phosphatases.

A number of aromatic substrates were evaluated for their ability to detect tyrosine phosphatase and serine/threonine phosphatase activity. Results demonstrated that the fluorinated coumarin DiFMUP is the most sensitive substrate for detecting LAR and PP-2A activity. Using this substrate, selective high-throughput screening assays for serine/threonine and tyrosine phosphatases were developed. Specific inhibitor cocktails were added to each assay to limit the activity of other phosphatases. LAR, CD-45, and PTP-1B all rapidly hydrolyze DiFMUP in the tyrosine phosphatase assay. The activity of non-tyrosine phosphatases is less than 6% of the LAR activity. PP-1 and PP-2A are highly active in the serine/threonine phosphatase assay. Inhibition of LAR and PP-2A in these assays is demonstrated using known inhibitors. Both of these assays are sensitive, robust, kinetic assays that can be used to quantify enzyme activity.