Smart bracket for multi-dimensional force and moment measurement.

Atraumatic, well-directed, and efficient tooth movement is interrelated with the therapeutic application of adequately dimensioned forces and moments in all three dimensions. The lack of appropriate monitoring tools inspired the development of an orthodontic bracket with an integrated microelectronic chip equipped with multiple piezoresistive stress sensors. Such a 'smart bracket' was constructed (scale of 2.5:1) and calibrated. To evaluate how accurately the integrated sensor system allowed for the quantitative determination of three-dimensional force-moment systems externally applied to the bracket, we exerted 396 different force-moment combinations with dimensions within usual therapeutic ranges (+/- 1.5 N and +/- 15 Nmm). Comparison between the externally applied force-moment components and those reconstructed on the basis of the stress sensor signals revealed very good agreement, with standard deviations in the differences of 0.037 N and 0.985 Nmm, respectively. We conclude that our methodological approach is generally suitable for monitoring the relatively low forces and moments exerted on individual teeth with fixed orthodontic appliances.

Validation of speed of sound for the assessment of cortical bone maturity.

Bone changes its structural and physical properties during maturation. In order to validate ultrasound measurements with regard to their usefulness in assessing cortical bone maturation, speed of sound (SOS) data were compared with mechanical properties (elastic modulus, bending strength, and cortical surface hardness), density and water content. Thirty pig mandibles were selected from three different age groups. Rectangular specimens of the buccal cortical bone of the body of the mandible were prepared. SOS was measured with pulsed ultrasound at a frequency of 2 MHz in all three dimensions, bone mineral density (BMD) by quantitative computed tomography, breaking strength and apparent elastic modulus in a three-point bending test to failure, water content using the lyophilization technique, and micro-indentation hardness using a modified Vickers' technique. While SOS in all three directions, BMD, surface hardness, and bending strength increased significantly (P < 0.001), bone tissue water content decreased significantly (P < 0.001) with age. Changes in the elastic modulus were not significant. Changes in SOS in the antero-posterior and apico-occlusal directions can be partly explained by BMD. In a bucco-lingual direction the increase is inadequately explained by the physical parameters investigated, and has possibly to be attributed to structural differences. Maturation of the mandible implies changes in its architectural organization, in material composition, and in the mechanical properties of cortical bone. In vitro SOS measurements reflect different structural and physical properties that are all age dependent. It thus seems feasible that age-related changes in bone maturation could be monitored by SOS measurements.

A thin, flexible multielectrode grid for high-density surface EMG.

Although the value of high-density surface electromyography (sEMG) has already been proven in fundamental research and for specific diagnostic questions, there is as yet no broad clinical application. This is partly due to limitations of construction principles and application techniques of conventional electrode array systems. We developed a thin, highly flexible, two-dimensional multielectrode sEMG grid, which is manufactured by using flexprint techniques. The material used as electrode carrier (Polyimid, 50 microm thick) allows grids to be cut out in any required shape or size. One universal grid version can therefore be used for many applications, thereby reducing costs. The reusable electrode grid is attached to the skin by using specially prepared double-sided adhesive tape, which allows the selective application of conductive cream only directly below the detection surfaces. To explore the practical possibilities, this technique was applied in single motor unit analysis of the facial musculature. The high mechanical flexibility allowed the electrode grid to follow the skin surface even in areas with very uneven contours, resulting in good electrical connections in the whole recording area. The silverchloride surfaces of the electrodes and their low electrode-to-skin impedances guaranteed high baseline stability and a low signal noise level. The electrode-to-skin attachment proved to withstand saliva and great tensile forces due to mimic contractions. The inexpensive, universally adaptable and minimally obstructive sensor allows the principal advantages of high-density sEMG to be extended to all skeletal muscles accessible from the skin surface and may lay the foundation for more broad clinical application of this noninvasive, two-dimensional sEMG technique.

A surface EMG electrode for the simultaneous observation of multiple facial muscles.

With previous surface electromyography (sEMG) electrodes it has been difficult to combine small outer dimensions and secure skin attachment. We resolved this problem by developing a new skin attachment technique that yields firm electrode fixation without requiring an acrylic housing. Consequently, we could reduce the outer electrode dimensions to 4-mm diameter and only 1.5-mm thickness. In a bipolar montage, this electrode allows an inter-electrode distance of 8 mm. This improves measurement selectivity and, because of the small dimensions, makes possible the non-invasive observation of multiple facial muscles with a minimum of obstruction. Our new technique was tested on a group of 11 professional trumpeters. They were instructed to perform a series of muscle-specific facial poses and to play exercises on their instruments while EMG signals were recorded simultaneously from seven different perioral muscles. Although the skin attachment was subjected to high stress during trumpet playing, more than 98% of electrode placements yielded a secure mechanical and electrical connection. Muscle selectivity of the signals recorded during the facial poses was similar to that obtained in a previous investigation using intra-muscular fine-wire electrodes. Crosstalk in the perioral area was estimated to be lower than 25%. The availability of an unobstructive sEMG electrode for simultaneously observing multiple facial muscles opens up a wide range of applications (e.g. in speech research, psychophysiology and orthodontics).

The importance of the level of the lip line and resting lip pressure in Class II, Division 2 malocclusion.

Many clinicians hypothesize that retroclination of the maxillary central incisors in Class II, Division 2 malocclusion is caused by increased resting lip pressure against these teeth. The purpose of this study was (1) to verify this assumption by means of simultaneous lip-pressure measurements at two different levels on the maxillary central incisor crowns, and (2) to examine factors that could possibly contribute to the increased resting lip pressure. This is the first study to prove that individuals with Class II, Division 2 malocclusion (n = 21) have the upper central incisors exposed to significantly higher lip pressure than those with Class I malocclusion (n = 21). Our statistical evaluation revealed that this is primarily attributed to a high lip line and not to a hypertonic peri-oral musculature. We concluded that orthodontic treatment of Class II, Division 2 cases should include intrusion of the maxillary incisors, to eliminate the non-physiologically high pressure exerted by the lower lip on these teeth and, consequently, to reduce the high risk of a post-orthodontic relapse.

[Long term compliance with an oral protrusive appliance in patients with obstructive sleep apnoea]. / Obstruktive Schlafatmungsstörungen: Therapiecompliance mit einem intraoralen Protrusionsgerät.

BACKGROUND AND OBJECTIVE: Oral protrusive devices (OPD) are increasingly used in primary snoring and mild-to-moderate obstructive sleep disordered breathing. Due to evidence of reduced compliance with the well established standard treatment of nasal positive airway pressure (CPAP) and reports of patient preference for OPD treatment, particularly in mild cases, OPD may be considered another treatment alternative. PATIENTS AND METHODS: We contacted 192 patients suffering from obstructive sleep breathing disorder, who were treated between May 1996 and September 2001 with an OPD. The patients" use of the device was evaluated, as were any reasons for ceasing to use the device. RESULTS: 105 patients (54.4%) regularly used the appliance after a mean time of 22.7 12.3 month. 21 patients (10.9%) showed no primary compliance and stopped had using the device before the first somnographic follow-up after a mean time of 3.8 months. In this investigation 76 patients (80,2%) were classified as responders and 19 patients (20.8%) as primary non-responders. 22 responders (11.4%) demonstrated no secondary compliance after a mean of 21.9 8.8 months and the discontinued OPD treatment themselves. In 21 patients (10.9%) the nightly respiratory parameters decreased after a mean of 23.0 11.7 months; hence, those patients required CPAP. The cumulative risk using the device after four years as prescribed was 32.2%. We found a correlation between patient compliance, body-mass index and the amount of teeth in the upper and lower jaws. CONCLUSION: OPD compliance seems to be lower than frequently expected. Regular follow-up investigations are necessary to ensure adequate treatment. Poor dental status and an excess body-mass index reduce patient compliance.

[Intraoral protrusion devices in obstructive sleep apnea. Dental findings and possible treatments]. / Intraorale Protrusionsgeräte bei schlafbezogenen obstruktiven Atmungsstörungen. Zahnärztliche Befunde und Behandlungsmöglichkeiten.

BACKGROUND: Oral protrusive devices are regarded as an alternative treatment option for snoring and mild to moderate obstructive breathing disorders. In addition to the polysomnographic indication based on the respiratory and somnographic findings, healthy stomatognatic conditions with sufficient dental retention for the device are essential for a successful treatment. PATIENTS AND METHODS: The sleep laboratory of the University Hospital of Freiburg i. Br. referred 112 patients with obstructive sleep apnea to the Department of Orthodontics for treatment with an oral protrusive device. All patients were examined clinically and with a panoramic radiograph with regard to continuous treatment. RESULTS: To maximize treatment success and minimize dental side effects, close collaboration with dental colleagues is necessary in treatment with an oral protrusive device. CONCLUSIONS: Acute periodontitis, periodontal lesions, insufficient dental anchorage, and temporomandibular symptoms can result in unwanted dental side effects and therefore limit the indication of this therapeutic approach.

Speed of sound measurements in mandibular and phalangeal bone during growth.

The micromechanical and elastic properties of bone, its structural maturity and, indirectly, mineral density are important factors for the planning and assessment of orthodontic and/or jaw orthopaedic treatment. This clinical study was undertaken to evaluate age-related changes in the anterior mandibular body. The speed of sound (SOS) has demonstrated age dependency in various peripheral bones and has been proposed as an alternative method for investigating bone parameters without the use of radiation. The ultrasound transmission velocity was measured in 184 healthy subjects (93 females, 91 males; mean age 17.6 +/- 13.7 years). According to the statistical analysis, the data did not reveal any gender-related differences, but were significantly age-dependent. Different kinetics were established between the maturity of the phalanx and the anterior mandible. Further clinical investigations of age-dependent structural changes in bone maturation parameters may provide information that should be taken into account for early functional jaw orthopaedic treatment.

Occlusal side effects caused by a mandibular advancement appliance in patients with obstructive sleep apnea.

Mandibular advancement appliances (MAA) have been established as an alternative treatment option for obstructive sleep apnea (OSA). Although the therapeutic effect of these devices has been proven both clinically and polysomnographically through various studies, there are very few follow-up examinations in existence concerning possible dental side effects caused by the MAA. However, if lifelong treatment of OSA is considered, these follow-up examinations are of utmost importance. This article presents 2 cases with unexpected dental side effects and occlusal alterations caused by MAA therapy.

Contribution to the biological assessment of orthodontic acrylic materials. Measurement of their residual monomer output and cytotoxicity.

The acrylic materials used in orthodontics for the fabrication of removable appliances are subjected in the oral cavity to processes of change which influence their physical, mechanical and biological properties. It is therefore essential that every newly developed material must be judged in terms of its clinical value. In the present study, 2 orthodontic cold-cure acrylics, Orthocryl and Forestacryl, and 4 orthodontic photocure acrylics, Triad, Wil-O-Dont, Odontolux and Lux-A-Tech, were investigated and compared with 2 prosthetic acrylic materials: the cold-cure acrylic Palapress and the hot-cure acrylic Paladon. The quantity of residual monomers from methyl methacrylate (MAA) or urethane dimethacrylate (UDMA) eluted from the sample in a given time after the processing was estimated by high pressure liquid chromatography (HPLC). The cytotoxic properties of the materials were examined by Mosmann's proliferation-inhibition test with an established culture of fibroblasts (= MTT test). The hot-cure acrylic Paladon produced by far the smallest amount of eluted residual monomer and the least growth inhibition in the MTT test. The prosthetic cold-cure acrylic Palapress achieved significantly better results than the orthodontic cold-cure materials Orthocryl and Forestacryl. The photocure acrylics released less UDMA than did the cold-cure acrylics MMA. In the cell culture test, all the orthodontic materials examined were assessed as "slightly cytotoxic"; the prosthetic acrylics were graded under ISO-standard 10993-5 as "noncytotoxic". After soaking the plastic material in water for 3 days its cytotoxic properties, as exemplified by the cold-cure acrylic Forestacryl and the photocure acrylic Triad, were reduced, and during the following investigation no more inhibition of growth was observed. It was possible to confirm with the tests used that, for Triad, it is necessary to carefully remove the oxygen-inhibition layer of the photocure acrylic in order to improve the biological properties. The influence of the plastic material on fibroblast cultures was assessed, among other methods, by the quantity of residual monomers liberated. These were significantly reduced after soaking the manufactured substance in water for 3 days. Careful laboratory treatment of the photocure acrylics is necessary in order to improve their biological properties.

Transcutaneous electrical nerve stimulation (TENS): its short-term and long-term effects on the masticatory muscles.

In an electromyographic study on subjects with no functional disturbances of the masticatory muscles, the duration of the post-therapeutic effects of transcutaneous electrical nerve stimulation (= TENS) on the superficial masseter and anterior temporal muscle was analyzed. The myoelectric signals were registered from 20 healthy volunteers in 3 different mandibular positions. The recordings were performed before a 20-minute TENS application with the J-4 Myomonitor and continued with a sequence of follow-up registrations with increasing interval to the initial stimulation. The EMG signals underwent computer-aided analysis and were evaluated by determining the integrated values as a parameter of muscle activity, and after Fourier transformation by 7 describing parameters of the power spectrum (e.g. mean power frequency = MPF). A detailed analysis of variance of all data was used to investigate significant changes of the parameters during the observation period. Muscular response to TENS includes a decrease in muscular activity (= reduction in integrated EMG signals) and a shift in the power spectrum to higher frequencies (increase in MPF). These changes were statistically highly significant for both analyzed muscles and for all different mandibular exercises. As these reactions to TENS are contrary to muscle fatigue, the results can be interpreted as indicating that this type of therapy stimulates a change in the biochemical and physiological muscular conditions, which leads to muscle relaxation. Electromyographically, the post-therapeutic effect lasted for 2 hours in case of normal masticatory muscle activity but for more than 7 hours in case of low muscular loading. The alterations of the integrated EMG values were more persistent than those of the parameters of the power spectrum.

In vitro investigation into the biological assessment of orthodontic wires.

The alloys used in orthodontics are subject in the moist environment of the oral cavity to various corrosion processes. If the products of the corrosion are introduced into a biological system they may cause changes. In the present investigation the corrosion rate of 23 different orthodontic wires (preformed arch wires and straight wires) made from 5 different alloys were examined in a nutrient medium by ICP-AES analysis, and the influence of the corrosion products on the cytotoxicity of a fibroblast culture was investigated using Mosmann's MTT test. The nickel-titanium wires Nitinol, Sentalloy and Original Chinese Wire and the beta-titanium alloy TMA had no effect on the rate of cell proliferation. Nor did stainless steel wires inhibit growth significantly, with the exception of Australian Wire and Wildcat Wire. The manganese-steel alloys Noninium h and Mezanium caused significant reductions in growth rate, which were attributed to the manganese ions released by the corrosion. The most severe growth inhibition was caused by the Co-Cr-Ni alloy Elgiloy, and this reaction is independent of the 4 levels of resilience. The degree of growth inhibition depended upon the concentration of corrosive cobalt and nickel ions in the eluate. In spite of the differences observed, all the orthodontic wires examined are graded under ISO-standard 10993-5 as "non-cytotoxic". The degree of toxicity was found to be determined essentially by the corrosion rate of the alloy and the cytotoxic characteristics of the resulting trace elements.

Reaction of oxytalan fibers in human periodontium to mechanical stress. A combined histochemical and morphometric analysis.

A combined histochemical and morphometric analysis was performed on normal and mechanically stressed periodontal tissue obtained from upper first premolars of ten boys. Oxytalan fibers were demonstrated histochemically according to the method of Fullmer and Lillie. Quantitative and qualitative oxytalan fiber alterations were evaluated by a morphometric analysis. The morphometric results proved that the oxytalan fiber reaction to increased mechanical stress was fibroplasia, fiber lengthening, and narrowing of the fiber diameter. No differences existed between the oxytalan fiber reaction in tension and pressure zones. These findings imply that the processes of functionally induced remodeling are not the same in the soft and hard tissue.