Persistence of aerially applied mosquito-pesticide, Naled, in fresh and marine waters.

Naled, an organophosphate pesticide, received considerable attention during 2016 as it was applied aerially to control the first mosquito-borne Zika virus outbreak in the continental United States. Stakeholders living in affected areas raised concerns about its environmental impacts. One factor influencing environmental impacts is the persistence of the chemical applied. The objective of this study was to evaluate the persistence of naled - and its degradation bi-product, dichlorvos - in natural waters. Initial naled concentrations were measured at ground level after full-scale aerial spray activities. Laboratory experiments were designed to evaluate factors (fresh versus marine water chemistry, temperature, and sunlight) that may promote the degradation of naled and dichlorvos in the environment. Results show that natural fresh and marine water chemistry promoted naled degradation as experiments with de-ionized water resulted in half-lives greater than 6 days. The half-life in natural waters without light ranged from 5 to 20 h with lower half lives at higher temperatures. Under light exposure, degradation was accelerated and yielded more dichlorvos. Detectable levels (0.05 µM for naled and 0.10 µM for dichlorvos) were measured in water samples collected from the field during aerial spray events. Results can be used in risk assessments that consider both naled and dichlorvos to better understand ecological impacts and to develop improved public health recommendations.

Waste type, incineration, and aeration are associated with per- and polyfluoroalkyl levels in landfill leachates.

Per- and polyfluoroalkyl substances (PFAS) are found in many consumer products which will be ultimately disposed in landfills. Limiting environmental contamination and future exposures will require managing leachates from different types of landfills, each with different PFAS levels depending upon the source of the waste. The objective of this study was to evaluate the influence of waste type and on-site treatment on PFAS levels in landfill leachates. Eleven PFAS species (7 carboxylic acids, 3 sulfonic acids, and 5:3 fluorotelomer carboxylic acid) were evaluated in leachates from municipal solid waste (MSW), construction and demolition (C&D), MSW ash (MSWA), and a mixture of MSWA and MSW with landfill gas condensate (MSWA/MSW-GC). Leachates were also analyzed before and after on-site treatment at two of these facilities. Results indicate that MSWA leachate had significantly lower PFAS levels relative to other leachate types. Lower total PFAS concentrations in MSWA leachates were correlated with an increase in incineration temperature (R2 = 0.92, p = 0.008). The levels of PFAS in untreated C&D and untreated MSW leachate were similar. The levels of targeted PFAS species in MSW leachate for one of the facilities evaluated increased after on-site landfill treatment presumably due to the conversion of PFAS precursors in the untreated leachate sample.

Arsenic, copper, and chromium from treated wood products in the U.S. disposal sector.

Construction and demolition (C&D) wood can be recycled as mulch for landscaping or cogeneration. Limitations to such recycling are dependent on metals concentrations in mulch (As, Cu, and Cr) from the inclusion of waterborne-preservative treated wood. The objective of this study was to evaluate the amount of waterborne-preservative treated wood (by wood volume and by mass of metal) that enters the C&D wood waste stream in the U.S. by utilizing a mass balance approach. A model was developed using wood treatment industry production statistics, estimated leaching rates of metal-based preservatives, and typical service lives of wood products. Outputs of the model indicate that the volumes of waterborne preservative treated wood disposed of may exceed 16 million m3 per year by 2030. The peak yearly metal mass disposed of corresponded to 18,400 metric tons for arsenic and 24,500 tons of chromium in 2013. Given the current trends in production, the mass of copper disposed of will increase to 20,900 tons by 2030. In order to meet regulatory guidelines regarding metals in recycled C&D wood, waterborne-preservative treated wood must be separated and removed. This separation mitigates environmental contamination from wood preservatives such as chromated copper arsenate (CCA).

Metals content of recycled construction and demolition wood before and after implementation of best management practices.

A limitation to recycling wood from construction and demolition (C&D) waste is contamination of metals from the inadvertent inclusion of preservative treated wood, in particular wood treated with chromated copper arsenate (CCA) and newer copper-based formulations. To minimize contamination many regions have developed best management practices (BMPs) for separating treated from untreated wood. The objective of this study was to evaluate the fraction of preservative treated wood in recycled C&D wood after the implementation of BMPs, using Florida as a case study. Methods involved collecting recycled C&D wood samples from throughout the state, measuring metals concentrations (As, Cu, and Cr) in the samples to compute the fraction of recycled wood treated with waterborne wood preservatives, and comparing measurements with those taken prior to the formalization of BMPs. Metals concentrations were measured using two methods, one based on traditional laboratory digestion methods and another using a more rapid hand-held X-ray Fluorescence (XRF) device in the field. The proportion of waterborne preservative-treated wood in recycled wood products has reduced significantly in the intervening 20 years (from 6% to 2.9%), and the fraction of CCA-treated wood has been reduced even further, to 1.4%. The remaining fraction of waterborne preservative-treated wood is comprised of new formulations of copper-based preservatives. This suggests that restrictions from the wood preservation industry and best management practices implemented at recycling facilities have been effective in reducing heavy metal contamination from pressure treated lumber in recycled wood products.