Detection of Paralytic Shellfish Toxins in Mussels and Oysters Using the Qualitative Neogen Lateral-Flow Immunoassay: An Interlaboratory Study.

Paralytic shellfish toxins (PSTs) in bivalve molluscs represent a public health risk and are controlled via compliance with a regulatory limit of 0.8 mg saxitoxin (STX)⋅2HCl equivalents per kilogram of shellfish meat (eq/kg). Shellfish industries would benefit from the use of rapid immunological screening tests for PSTs to be used for regulation, but to date none have been fully validated. An interlaboratory study involving 16 laboratories was performed to determine the suitability of the Neogen test to detect PSTs in mussels and oysters. Participants performed the standard protocol recommended by the manufacturer and a modified protocol with a conversion step to improve detection of gonyautoxin 1&4. The statistical analysis showed that the protocols had good homogeneity across all laboratories, with satisfactory repeatability, laboratory, and reproducibility variation near the regulatory level. The mean probability of detection (POD) at 0.8 mg STX⋅2HCl eq/kg using the standard protocol in mussels and oysters was 0.966 and 0.997, respectively, and 0.968 and 0.966 using the modified protocol. The estimated LOD in mussels was 0.316 mg STX⋅2HCl eq/kg with the standard and 0.682 mg STX⋅2HCl eq/kg with the modified protocol, and 0.710 and 0.734 mg STX⋅2HCl eq/kg for oysters, respectively. The Neogen test may be acceptable for regulatory purposes for oysters in accordance with European Commission directives in which the standard protocol provides, at the regulatory level, a probability of a negative response of 0.033 on 95% of occasions. Its use for mussels is less consistent at the regulatory level due to the wide prediction interval around the POD.

Practical isolation of polygodial from Tasmannia lanceolata: a viable scaffold for synthesis.

Polygodial, a valuable sesquiterpene dialdehyde featuring an epimerizable stereocenter was efficiently extracted and isolated in gram-scale quantities (3.3% w/w) from Tasmannia lanceolata (Tasmanian native pepper) via a recently developed rapid pressurised hot water extraction (PHWE) technique that utilises an unmodified household espresso machine. This method was compared to the maceration of T. lanceolata under a range of conditions. Polygodial was used to achieve semi-syntheses of closely related sesquiterpene natural products drimendiol, (-)-drimenol, (+)-euryfuran, and some non-natural derivatives.

Determination of tributyltin in marine sediment and waters by pressurised solvent extraction and liquid chromatography-tandem mass spectrometry.

In this study, tributyltin (TBT) was extracted from marine sediment matrix with the use of pressurised solvent extraction (PSE), which uses high-temperature and -pressure conditions to increase extraction efficiency. The analyte was chromatographically resolved using a liquid chromatography-tandem mass spectrometry (LC-MS/MS) system with a pentafluorophenyl (PFP) column and a methanol/aqueous formic acid mobile phase gradient, and was detected by MS/MS as product fragments after collisionally induced dissociation (CID) of the cationic parent molecule. This study represents the first application of PSE extraction combined with LC-MS/MS analysis for the determination of TBT in sediments. The method has been validated according to the International Organisation for Standardisation (ISO) 17025:2001 and affords automated extraction of sediment samples with high-sensitivity analysis. The full method limit of detection was established as 1.25 ng Sn g(-1) with an instrument detection limit of 0.01 ng Sn g(-1). The chromatographic procedure may also be applied for the direct analysis of water matrices without the need for sample manipulation, and therefore represents a combined analytical approach for the monitoring of TBT contamination in marine or estuarine ecosystems.

Selection of SPE cartridge for automated solid-phase extraction of pesticides from water followed by liquid chromatography-tandem mass spectrometry.

In environmental analyses there is an ever-increasing need to develop simple and sensitive multi-residue methods. In many agricultural regions, there is particular concern of the potential for pesticides to enter rivers and other waterways. This study reports on the development and validation of a multi-residue method of analysis for 30 pesticides in water samples using solid-phase extraction (SPE) followed by LC-MS/MS. The electrospray and MS/MS parameters were optimised for each pesticide, including capillary voltage, collision-induced dissociation voltage, and selection of a precursor ion and two product ions. A variety of SPE sorbents were tested for sample pre-concentration, including numerous polymeric based phases. Bond Elut PPL and Oasis HLB were the only phases capable of retaining the majority of the target analyte classes in a single method. An off-line pre-concentration method using a Gilson Aspec system was optimised using the Bond Elut PPL cartridges, with a concentration factor of 25 producing limits of quantitation in the order of 6-100 ng/L. Excellent linearity (r2 > 0.9), precision (<20%) and recovery (>60%) was obtained for nearly all of the analytes, covering a wide variety of chemical and physical properties. This is the first study to fully validate Bond Elut PPL cartridges for use in multi-residue pesticide analysis.

Effect of airflow setting on the organic composition of woodheater emissions.

Fine particle emissions from woodheaters are large contributors to ambient atmospheric pollution in a number of regional centers in Australia. The health impact of woodsmoke is not limited to the particle loading alone, and a wide range of toxic inorganic and organic compounds are also emitted as gases or adsorbed onto particles. The organic composition of woodsmoke was determined from two heater models operated using different airflow settings. Particle emission factors varied between 3 and 36 g per kg dry wood burned, with higher burn rates (open airflow) producing significantly less particle mass per kg wood burned than the low burn rates (closed airflow). Over 90 organic compounds were quantified from the vapor- and particle-phases, including furans, methoxyphenols, and other substituted aromatics, PAHs, maltols, and the sugar levoglucosan. Emission factors for the majority of the particle-phase compounds increased as the airflow was progressively closed, but decreased for some PAHs and other compounds found predominantly in the vapor-phase. Levoglucosan was the single most abundant compound, contributing 5-16% of the total particle mass. Although there was some variation in levoglucosan emissions between heater models, the fact that levoglucosan emissions vary relatively little between airflow conditions for a given heater provides the potential to use it as a general tracer for woodsmoke. In contrast, the mass fractions of many other particle-phase compounds were considerably higher when operated with a closed airflow.