Corrosion inhibition of mild steel in 1 M HCl using water soluble chitosan derivative of vanillin.

The water-soluble chitosan derivative (WSCD) was made by mixing chitosan with sodium hydroxide, treating the mixture with chloroacetic acid, and then forming a Schiff base with vanillin in an acidic medium. In this study, we examined the corrosion-inhibiting ability of a WSCD on mild steel surfaces in acidic environments. Weight loss, EIS, PDP, LPS, and OCP measurements were used to study the corrosion resistance on mild steel surfaces in 1 M HCl solutions with known concentrations of WSCD. The results show that WSCD functions effectively as a mixed-type anodic and cathodic inhibitor, providing 87 % corrosion inhibition efficiency at 75 ppm. Using SEM to investigate the morphology of corroded mild steel with and without varying amounts of WSCD, impedance measurements show the development of a thin film of inhibitor on the metal surface, the extent of which increases as the inhibitor concentration rises. The WSCD molecule first adsorbs on mild steel and follows Langmuir adsorption isotherm. It is found that the (∆Gads0)adsorption's free energy is -17.473 kJ/mol. The contact angle measurements confirm that the hydrophobicity of the metal surface has increased as a result of the inhibitor's thin film development.

Achromobacter denitrificans strain SP1 efficiently remediates di(2-ethylhexyl)phthalate.

This study describes how Achromobacter denitrificans strain SP1, a novel isolate from heavily plastics-contaminated sewage sludge efficiently consumed the hazardous plasticizer, di(2-ethylhexyl)phthalate (DEHP) as carbon source supplemented in a simple basal salt medium (BSM). Response surface methodology was employed for the statistical optimization of the process parameters such as temperature (32°C), agitation (200 rpm), DEHP concentration (10 mM), time (72 h) and pH (8.0). At these optimized conditions, experimentally observed DEHP degradation was 63%, while the predicted value was 59.2%; and the correlation coefficient between them was 0.998, i.e., highly significant and fit to the predicted model. Employing GC-MS analysis, the degradation pathway was partially deduced with intermediates such as mono(2-ethylhexyl)phthalate and 2-ethyl hexanol. Briefly, this first report describes A. denitrificans strain SP1 as a highly efficient bacterium for completely remediating the hazardous DEHP (10 mM) in 96 h in BSM (50% consumed in 60 h), which offers great potentials for efficiently cleaning the DEHP-contaminated environments such as soil, sediments and water upon its deployment.

Fungal biodegradation of phthalate plasticizer in situ.

This unique study describes how Aspergillus japonicus, Penicillium brocae and Purpureocillium lilacinum, three novel isolates of our laboratory from heavily plastics-contaminated soil completely utilized the plasticizer di(2-ethylhexyl)phthalate (DEHP) bound to PVC blood storage bags (BB) in simple basal salt medium (BSM) by static submerged growth (28 °C). Initial quantification as well as percentage utilization of DEHP blended to BB were estimated periodically by extracting it into n-hexane. A two-stage cultivation strategy was employed for the complete mycoremediation of DEHP from BB in situ. During the first growth stage, about two-third parts of total (33.5% w/w) DEHP bound to BB were utilized in two weeks, accompanied by increased fungal biomass (~0.15-0.32 g per g BB) and sharp declining (to ~3) of initial pH (7.2). At this stagnant growth state (low pH), spent medium was replaced by fresh BSM (pH, 7.2), and thus in the second stage the remaining DEHP (one-third) in BB was utilized completely. The ditches and furrows seen from the topology of the BB as seen by the 3D AFM image further confirmed the bioremediation of DEHP physically bound to BB in situ. Of the three mycelial fungi employed, P. lilacinum independently showed highest efficiency for the complete utilization of DEHP bound to BB, whose activity was comparable to that of the consortium comprising all the three fungi described herein. To sum up, the two-stage cultivation strategy demonstrated in this study shows that a batch process would efficiently remediate the phthalic acid esters blended in plastics on a large scale, and thus it offers potentials for the management of plastics wastes.