ABSTRACT
A new approach in this present study, isolated bacteria from refinery sludge were used in a laboratory-scale bio-scrubber, connecting with two parallel airlift bioreactors to eliminate harmful and toxic fumes of BTX. One of the main features of this bio-scrubber is using porous mineral pumice fillers (Lava Rock) inside poly-urethane foam (PUF) module tower, connecting with agitator bio-phasic continuously stirred tank bio-reactor (CSTbR) to increase retention time and contact surface. The bio-scrubber and airlift plug flow bio-reactor (PFbR) were used in parallel with cooling flow to be more efficient in preservation of the corresponding heater and endothermic from removal reactions. Performance of bio-scrubber in removing BTX vapors with 10 % silicone oil and grade 350 poise as organic phase in the inlet concentration range of 180 ± 0.3 to 1950.5 ± 0.1 mg /m3 (ppmv) for up to 6 months in two air flow rate's 2.5 and 3.5 (lit/min) that each treatment lasted about 2 months. The rate of biodegradation in this study was carried out by mixing 3 isolated bacteria, obtaining from refinery sludge, named DBIS-03, DTIS-12, and DXIS-09, which they had highest biodegradability than all the isolated strains. The results of BTX biodegradation at each EBRT (Empty Bed Retention Time) showed that the removal efficiency of BTX with isolated bacterial samples was able to grow and multiply on porous fillers and regenerate the growth medium of autotrophic bacterial strain with O2 gas and micronutrients from contaminated air flow with minimum concentration. Benzene, toluene and xylene inputs maximum concentration over a period of 20 days loading, respectively: B :99.2 % (at 2.5 lit/min and 183.2 ± 0.2 mg /m3 (ppmv)), T: 98 % (at 2.5 lit/min and 327.1 ± 0.1 mg /m3 ( ppmv)) and X: 85.9 % (at 2.5 lit/min and 296.8 ± 0.8 mg /m3 (ppmv)) compared to 3.5 lit/min and so show the best performance in removing BTX from polluted air in period of 30 days.
ABSTRACT
Herein, two novel porous polymer matrix nanocomposites were synthesized and used as adsorbents for heavy metal uptake. Methacrylate-modified large mesoporous silica FDU-12 was incorporated in poly(methyl methacrylate) matrix through an in-situ polymerization approach. For another, amine-modified FDU-12 was composited with Nylon 6,6 via a facile solution blending protocol. Various characterization techniques including small-angle X-ray scattering, FTIR spectroscopy, field emission-scanning electron microscopy, transmission electron microscopy, porosimetry, and thermogravimetric analysis have been applied to investigate the physical and chemical properties of the prepared materials. The adsorption of Pb(II) onto the synthesized nanocomposites was studied in a batch system. After study the effect of solution pH, adsorbent amount, contact time, and initial concentration of metal ion on the adsorption process, kinetic studies were also conducted. For both adsorbents, the Langmuir and pseudo-second-order models were found to be the best fit to predict isotherm and kinetics of adsorption. Based on the Langmuir model, maximum adsorption capacities of 105.3 and 109.9 mg g-1 were obtained for methacrylate-modified FDU-12/poly(methyl methacrylate) and amine-modified FDU-12/Nylon 6,6, respectively.
