100 GBd IM/DD transmission over 14†km SMF in the C-band enabled by a plasmonic SSB MZM.

100 Gb/s NRZ-OOK transmission over 14 km standard single mode fiber in the C-band is demonstrated with a simple intensity modulation and direct detection scheme. The transmission concept utilizes single sideband modulation and comprises a single differential digital-to-analog converter with adjustable phase offset, a new dual electrode plasmonic Mach-Zehnder modulator, a laser at 1537.5 nm, standard single mode fibers, a photodiode, an analog-to-digital converter, and linear offline digital signal processing. The presented SSB concept requires no DSP and complex signaling at the transmitter. The demonstrated SSB transmitter increased the possible transmission distance by a factor of 4.6 compared to a DSB transmitter. We also investigated the equalization requirements. A T/2-spaced feedforward equalizer requires 27 taps to achieve transmission over 10 km with a BER below the HD-FEC limit. In comparison to a DSB transmitter, the SSB transmitter reduced the receiver DSP complexity by a factor of 13.7.

120 GBd plasmonic Mach-Zehnder modulator with a novel differential electrode design operated at a peak-to-peak drive voltage of 178 mV.

A new plasmonic Mach-Zehnder modulator is demonstrated at a bit rate of 120 Gb/s NRZ-OOK with low peak-to-peak driving voltages of 178 mVpp below the HD-FEC limit. Such record low driving voltage requirements potentially translate into an electrical drive power consumption of 862 aJ/bit. The low drive voltages have been made possible by a new differential Mach-Zehnder modulator electrode design. The differential electrode design is optimized for the balanced driving circuitry and reduces the effectively required driving voltage by a factor of four (Vπ/4). The potential of the transmitter scheme is further demonstrated by a transmission experiment over 500 m of single mode fiber at the C-band with a BER performance below the KP4 FEC limit.

Plasmonic IQ modulators with attojoule per bit electrical energy consumption.

Coherent optical communications provides the largest data transmission capacity with the highest spectral efficiency and therefore has a remarkable potential to satisfy today's ever-growing bandwidth demands. It relies on so-called in-phase/quadrature (IQ) electro-optic modulators that encode information on both the amplitude and the phase of light. Ideally, such IQ modulators should offer energy-efficient operation and a most compact footprint, which would allow high-density integration and high spatial parallelism. Here, we present compact IQ modulators with an active section occupying a footprint of 4 × 25 µm × 3 µm, fabricated on the silicon platform and operated with sub-1-V driving electronics. The devices exhibit low electrical energy consumptions of only 0.07 fJ bit-1 at 50 Gbit s-1, 0.3 fJ bit-1 at 200 Gbit s-1, and 2 fJ bit-1 at 400 Gbit s-1. Such IQ modulators may pave the way for application of IQ modulators in long-haul and short-haul communications alike.

Large Pockels effect in micro- and nanostructured barium titanate integrated on silicon.

The electro-optical Pockels effect is an essential nonlinear effect used in many applications. The ultrafast modulation of the refractive index is, for example, crucial to optical modulators in photonic circuits. Silicon has emerged as a platform for integrating such compact circuits, but a strong Pockels effect is not available on silicon platforms. Here, we demonstrate a large electro-optical response in silicon photonic devices using barium titanate. We verify the Pockels effect to be the physical origin of the response, with r42 = 923 pm V-1, by confirming key signatures of the Pockels effect in ferroelectrics: the electro-optic response exhibits a crystalline anisotropy, remains strong at high frequencies, and shows hysteresis on changing the electric field. We prove that the Pockels effect remains strong even in nanoscale devices, and show as a practical example data modulation up to 50 Gbit s-1. We foresee that our work will enable novel device concepts with an application area largely extending beyond communication technologies.

Atomic Scale Photodetection Enabled by a Memristive Junction.

The optical control of atomic relocations in a metallic quantum point contact is of great interest because it addresses the fundamental limit of "CMOS scaling". Here, by developing a platform for combined electronics and photonics on the atomic scale, we demonstrate an optically controlled electronic switch based on the relocation of atoms. It is shown through experiments and simulations how the interplay between electrical, optical, and light-induced thermal forces can reversibly relocate a few atoms and enable atomic photodetection with a digital electronic response, a high resistance extinction ratio (70 dB), and a low OFF-state current (10 pA) at room temperature. Additionally, the device introduced here displays an optically induced pinched hysteretic current (optical memristor). The photodetector has been tested in an experiment with real optical data at 0.5 Gbit/s, from which an eye diagram visualizing millions of detection cycles could be produced. This demonstrates the durability of the realized atomic scale devices and establishes them as alternatives to traditional photodetectors.

Low-loss plasmon-assisted electro-optic modulator.

For nearly two decades, researchers in the field of plasmonics 1 -which studies the coupling of electromagnetic waves to the motion of free electrons near the surface of a metal 2 -have sought to realize subwavelength optical devices for information technology3-6, sensing7,8, nonlinear optics9,10, optical nanotweezers 11 and biomedical applications 12 . However, the electron motion generates heat through ohmic losses. Although this heat is desirable for some applications such as photo-thermal therapy, it is a disadvantage in plasmonic devices for sensing and information technology 13 and has led to a widespread view that plasmonics is too lossy to be practical. Here we demonstrate that the ohmic losses can be bypassed by using 'resonant switching'. In the proposed approach, light is coupled to the lossy surface plasmon polaritons only in the device's off state (in resonance) in which attenuation is desired, to ensure large extinction ratios between the on and off states and allow subpicosecond switching. In the on state (out of resonance), destructive interference prevents the light from coupling to the lossy plasmonic section of a device. To validate the approach, we fabricated a plasmonic electro-optic ring modulator. The experiments confirm that low on-chip optical losses, operation at over 100 gigahertz, good energy efficiency, low thermal drift and a compact footprint can be combined in a single device. Our result illustrates that plasmonics has the potential to enable fast, compact on-chip sensing and communications technologies.

High-speed plasmonic modulator in a single metal layer.

Plasmonics provides a possible route to overcome both the speed limitations of electronics and the critical dimensions of photonics. We present an all-plasmonic 116-gigabits per second electro-optical modulator in which all the elements-the vertical grating couplers, splitters, polarization rotators, and active section with phase shifters-are included in a single metal layer. The device can be realized on any smooth substrate surface and operates with low energy consumption. Our results show that plasmonics is indeed a viable path to an ultracompact, highest-speed, and low-cost technology that might find many applications in a wide range of fields of sensing and communications because it is compatible with and can be placed on a wide variety of materials.

Constellation modulation - an approach to increase spectral efficiency.

Constellation modulation (CM) is introduced as a new degree of freedom to increase the spectral efficiency and to further approach the Shannon limit. Constellation modulation is the art of encoding information not only in the symbols within a constellation but also by encoding information by selecting a constellation from a set of constellations that are switched from time to time. The set of constellations is not limited to sets of partitions from a given constellation but can e.g., be obtained from an existing constellation by applying geometrical transformations such as rotations, translations, scaling, or even more abstract transformations. The architecture of the transmitter and the receiver allows for constellation modulation to be used on top of existing modulations with little penalties on the bit-error ratio (BER) or on the required signal-to-noise ratio (SNR). The spectral bandwidth used by this modulation scheme is identical to the original modulation. Simulations demonstrate a particular advantage of the scheme for low SNR situations. So, for instance, it is demonstrated by simulation that a spectral efficiency increases by up to 33% and 20% can be obtained at a BER of 10-3 and 2×10-2 for a regular BPSK modulation format, respectively. Applying constellation modulation, we derive a most power efficient 4D-CM-BPSK modulation format that provides a spectral efficiency of 0.7 bit/s/Hz for an SNR of 0.2 dB at a BER of 2 × 10-2.

Multi-format carrier recovery for coherent real-time reception with processing in polar coordinates.

A blind frequency and phase search algorithm for joint frequency and phase recovery is introduced. The algorithm achieves low complexity due to processing in polar coordinates, which reduces the amount of multiplications. We show an implementation for real-time processing at 32 GBd on FPGA hardware. The hardware design allows for dynamic multi-format operation, where the format can be switched flexibly after each clock cycle (250 MHz, 128 Symbols) between 4QAM, 8QAM, and 16QAM. The performance of the algorithm is evaluated with respect to laser phase noise, carrier frequency offset, and carrier frequency offset drift. The effect of working with limited hardware resources is investigated. An FPGA implementation shows the feasibility of our carrier recovery algorithm with a negligible penalty when compared to a floating point simulation.