A Nanostructuring Method to Decouple Electrical and Thermal Transport through the Formation of Electrically Triggered Conductive Nanofilaments.

Transforming thermal energy into electric energy and vice versa needs the decoupling of electrical transport from thermal transport. An innovative strategy is proposed by forming/disrupting electrically triggered conductive nanofilaments within semiconducting thin films to switch thermoelectric properties between two states without further material modification and manufacturing processes. It can also controllably adjust the degree of decoupling, providing a potential resolution and performance adjustability for heat/coldness control or power consumption reduction on demand.

Evidence of indirect gap in monolayer WSe2.

Monolayer transition metal dichalcogenides, such as MoS2 and WSe2, have been known as direct gap semiconductors and emerged as new optically active materials for novel device applications. Here we reexamine their direct gap properties by investigating the strain effects on the photoluminescence of monolayer MoS2 and WSe2. Instead of applying stress, we investigate the strain effects by imaging the direct exciton populations in monolayer WSe2-MoS2 and MoSe2-WSe2 lateral heterojunctions with inherent strain inhomogeneity. We find that unstrained monolayer WSe2 is actually an indirect gap material, as manifested in the observed photoluminescence intensity-energy correlation, from which the difference between the direct and indirect optical gaps can be extracted by analyzing the exciton thermal populations. Our findings combined with the estimated exciton binding energy further indicate that monolayer WSe2 exhibits an indirect quasiparticle gap, which has to be reconsidered in further studies for its fundamental properties and device applications.Monolayer transition metal dichalcogenides have so far been thought to be direct bandgap semiconductors. Here, the authors revisit this assumption and find that unstrained monolayer WSe2 is an indirect-gap material, as evidenced by the observed photoluminescence intensity-energy correlation.

Large-area synthesis of highly crystalline WSe(2) monolayers and device applications.

The monolayer transition metal dichalcogenides have recently attracted much attention owing to their potential in valleytronics, flexible and low-power electronics, and optoelectronic devices. Recent reports have demonstrated the growth of large-size two-dimensional MoS2 layers by the sulfurization of molybdenum oxides. However, the growth of a transition metal selenide monolayer has still been a challenge. Here we report that the introduction of hydrogen in the reaction chamber helps to activate the selenization of WO3, where large-size WSe2 monolayer flakes or thin films can be successfully grown. The top-gated field-effect transistors based on WSe2 monolayers using ionic gels as the dielectrics exhibit ambipolar characteristics, where the hole and electron mobility values are up to 90 and 7 cm(2)/Vs, respectively. These films can be transferred onto arbitrary substrates, which may inspire research efforts to explore their properties and applications. The resistor-loaded inverter based on a WSe2 film, with a gain of ∼13, further demonstrates its applicability for logic-circuit integrations.

Epitaxial growth of π-stacked perfluoropentacene on graphene-coated quartz.

Chemical-vapor-deposited large-area graphene is employed as the coating of transparent substrates for the growth of the prototypical organic n-type semiconductor perfluoropentacene (PFP). The graphene coating is found to cause face-on growth of PFP in a yet unknown substrate-mediated polymorph, which is solved by combining grazing-incidence X-ray diffraction with theoretical structure modeling. In contrast to the otherwise common herringbone arrangement of PFP in single crystals and "standing" films, we report a π-stacked arrangement of coplanar molecules in "flat-lying" films, which exhibit an exceedingly low π-stacking distance of only 3.07 Å, giving rise to significant electronic band dispersion along the π-stacking direction, as evidenced by ultraviolet photoelectron spectroscopy. Our study underlines the high potential of graphene for use as a transparent electrode in (opto-)electronic applications, where optimized vertical transport through flat-lying conjugated organic molecules is desired.

Transfer printing of graphene strip from the graphene grown on copper wires.

A simple, cost-effective and lithography-free fabrication of graphene strips for device applications is demonstrated. The graphene thin layers were directly grown on Cu wires, followed by Cu etching and transfer printing to arbitrary substrates by a PDMS stamp. The Cu wires can be arranged on the PDMS stamp in a desired pattern; hence, the substrates can receive graphene strips with the same pattern. Moreover, the preparation of graphene strips does not involve conventional lithography; therefore, the surface of the graphene strip is free of residual photoresists, which may be useful for studies requiring clean graphene surfaces.

Synthesis of few-layer hexagonal boron nitride thin film by chemical vapor deposition.

In this contribution we demonstrate a method of synthesizing a hexagonal boron nitride (h-BN) thin film by ambient pressure chemical vapor deposition on polycrystalline Ni films. Depending on the growth conditions, the thickness of the obtained h-BN film is between ∼5 and 50 nm. The h-BN grows continuously on the entire Ni surface and the region with uniform thickness can be up to 20 µm in lateral size which is only limited by the size of the Ni single crystal grains. The hexagonal structure was confirmed by both electron and X-ray diffraction. X-ray photoelectron spectroscopy shows the B/N atomic ratio to be 1:1.12. A large optical band gap (5.92 eV) was obtained from the photoabsorption spectra which suggest the potential usage of this h-BN film in optoelectronic devices.