ABSTRACT
High-performance thermoplastics like polyetheretherketone (PEEK), with their outstanding thermal stability, mechanical properties and chemical stability, have great potential for various structural applications. Combining with additive manufacturing methods extends further PEEK usage, e.g., as a mold insert material in polymer melt processing like injection molding. Mold inserts must possess a certain mechanical stability, a low surface roughness as well as a good thermal conductivity for the temperature control during the molding process. With this in mind, the commercially available high-performance thermoplastic PEEK was doped with small amounts of carbon nanotubes (CNT, 6 wt%) and copper particles (10 wt%) targeting enhanced thermomechanical properties and a higher thermal conductivity. The composites were realized by a commercial combined compounder and filament maker for the usage in a material extrusion (MEX)-based 3D-printer following the fused filament fabrication (FFF) principle. Commercial filaments made from PEEK and carbon fiber reinforced PEEK were used as reference systems. The impact of the filler and the MEX printing conditions like printing temperature, printing speed and infill orientation on the PEEK properties were characterized comprehensively by tensile testing, fracture imaging and surface roughness measurements. In addition, the thermal conductivity was determined by the laser-flash method in combination with differential scanning calorimetry and Archimedes density measurement. The addition of fillers did not alter the measured tensile strength in comparison to pure PEEK significantly. The fracture images showed a good printing quality without the MEX-typical voids between and within the deposited layers. Higher printing temperatures caused a reduction of the surface roughness and, in some cases, an enhanced ductile behavior. The thermal conductivity could be increased by the addition of the CNTs. Following the given results, the most critical process step is the compounding procedure, because for a reliable process-parameter-property relationship, a homogeneous particle distribution in the polymer matrix yielding a reliable filament quality is essential.
ABSTRACT
Due to its multi-material capabilities, 3D inkjet printing allows for the fabrication of components with functional elements which may significantly reduce the production steps. The potential to print electronics requires jettable polymer-ceramic composites for thermal management. In this study, a respective material was formulated by functionalizing submicron alumina particles by 3-(trimethoxysilyl)propylmethacrylate (MPS) and suspending them in a mixture of the oligourethane Genomer 4247 with two acrylate functionalities and a volatile solvent. Ink jetting tests were performed, as well as thermal conductance and mechanical property measurements. The material met the strict requirements of the printing technology, showing viscosities of around 16 mPa·s as a liquid. After solidification, it exhibited a ceramic content of 50 vol%, with a thermal conductance of 1 W/(m·K). The resulting values reflect the physical possibilities within the frame of the allowed tolerances set by the production method.
