Self-Catalytic Growth of Elementary Semiconductor Nanowires with Controlled Morphology and Crystallographic Orientation.

While the orientation-dependent properties of semiconductor nanowires have been theoretically predicted, their study has long been overlooked in many fields owing to the limits to controlling the crystallographic growth direction of nanowires (NWs). We present here the orientation-controlled growth of single-crystalline germanium (Ge) NWs using a self-catalytic low-pressure chemical vapor deposition process. By adjusting the growth temperature, the orientation of growth direction in GeNWs was selectively controlled to the ⟨110⟩, ⟨112⟩, or ⟨111⟩ directions on the same substrate. The NWs with different growth directions exhibit distinct morphological features, allowing control of the NW morphology from uniform NWs to nanoribbon structures. Significantly, the VLS-based self-catalytic growth of the ⟨111⟩ oriented GeNW suggests that NW growth is possible for single elementary materials even without an appropriate external catalyst. Furthermore, these findings could provide opportunities to investigate the orientation-dependent properties of semiconductor NWs.

Solution-Processed MoS2 Film with Functional Interfaces via Precursor-Assisted Chemical Welding.

Molybdenum disulfide (MoS2) presents fascinating properties for next-generation applications in diverse fields. However, fully exploiting the best properties of MoS2 in largescale practical applications still remains a challenge due to lack of proper processing methods. Solution-based processing can be a promising route for scalable production of MoS2 nanosheets, but the resulting assembled film possesses an enormous number of interfaces that significantly compromise the intrinsic electrical properties. Herein, we demonstrate the solution processing of MoS2 and subsequent precursor-assisted chemical welding to form defective MoS2-x at the nanosheet interfaces. The formation of defective MoS2-x significantly reduces the electrical contact resistances, and thus the chemically welded MoS2 film exhibits more than 2 orders of magnitude improved electrical conductivity. Furthermore, the chemical welding provides MoS2-x interface induced additional defect originated functionalities for diverse applications such as broadband photodetection over the near-infrared range and improved electrocatalytic activity for hydrogen evolution reactions. Overall, this precursor-assisted chemical welding strategy can be a facile route to produce high-quality MoS2 films with low-quality defective MoS2-x at the interfaces having multifunctionalities in electronics, optoelectronics, and electrocatalysis.

Super-Nernstian pH Sensor Based on Anomalous Charge Transfer Doping of Defect-Engineered Graphene.

The conventional pH sensor based on the graphene ion-sensitive field-effect transistor (Gr-ISFET), which operates with an electrostatic gating at the solution-graphene interface, cannot have a pH sensitivity above the Nernst limit (∼59 mV/pH). However, for accurate detection of the pH levels of an aqueous solution, an ultrasensitive pH sensor that can exceed the theoretical limit is required. In this study, a novel Gr-ISFET-based pH sensor is fabricated using proton-permeable defect-engineered graphene. The nanocrystalline graphene (nc-Gr) with numerous grain boundaries allows protons to penetrate the graphene layer and interact with the underlying pH-dependent charge-transfer dopant layer. We analyze the pH sensitivity of nc-Gr ISFETs by adjusting the grain boundary density of graphene and the functional group (OH-, NH2-, CH3-) on the SiO2 surface, confirming an unusual negative shift of the charge-neutral point (CNP) as the pH of the solution increases and a super-Nernstian pH response (approximately -140 mV/pH) under optimized conditions.

Unraveling the Factors Affecting the Electrochemical Performance of MoS2-Carbon Composite Catalysts for Hydrogen Evolution Reaction: Surface Defect and Electrical Resistance of Carbon Supports.

In MoS2-carbon composite catalysts for hydrogen evolution reaction (HER), the carbon materials generally act as supports to enhance the catalytic activity of MoS2 nanosheets. The carbon support provides a large surface area for increasing the MoS2 edge site density, and its physical structure can affect the electron transport rate in the composite catalysts. However, despite the importance of the carbon materials, direct observation of the effects of the physical properties of the carbon supports on the HER activity of MoS2-carbon composite catalysts has been hardly reported. In this work, we conduct an experimental model study to find the fundamental and important understanding of the correlation between the structural characteristics of carbon supports and the HER performance of MoS2-carbon composite catalysts using surface-modified graphitic carbon shell (GCS)-encapsulated SiO2 nanowires (GCS@SiO2 NWs) as support materials for MoS2 nanosheets. The surface defect density and the electrical resistance of GCS@SiO2 NWs are systematically modulated by control of H2 gas flow rates during the carbon shell growth on the SiO2 NWs. From in-depth characterization of the model catalysts, it is confirmed that the intrinsic catalytic activity of MoS2-carbon composites for the HER is improved linearly with the conductance of the carbon supports regardless of the MoS2 edge site density. However, in the HER polarization curve, the apparent current density increases in proportion to the product of the number of MoS2 edge sites and the conductance of GCS@SiO2 NWs.

Gastight Hydrodynamic Electrochemistry: Design for a Hermetically Sealed Rotating Disk Electrode Cell.

Rotating disk electrodes (RDEs) are widely used in electrochemical characterization to analyze the mechanisms of various electrocatalytic reactions. RDE experiments often make use of or require collection and quantification of gaseous products. The combination of rotating parts and gaseous analytes makes the design of RDE cells that allow for headspace analysis challenging due to gas leaks at the interface of the cell body and the rotator. In this manuscript we describe a new, hermetically sealed electrochemical cell that allows for electrode rotation while simultaneously providing a gastight environment. Electrode rotation in this new cell design is controlled by magnetically coupling the working electrode to a rotating magnetic driver. Calibration of the RDE using a tachometer shows that the rotation speed of the electrode is the same as that of the magnetic driver. To validate the performance of this cell for hydrodynamic measurements, limiting currents from the reduction of a potassium ferrocyanide (K4[Fe(CN)6]·3H2O) were measured and shown to compare favorably with calculated values from the Levich equation and with data obtained using more typical, nongastight RDE cells. Faradaic efficiencies of ∼95% were measured in the gas phase for oxygen evolution in alkaline media at an Inconel 625 alloy electrocatalyst during rotation at 1600 rpm. These data verify that a gastight environment is maintained even during rotation.

Large reduction in thermal conductivity for SiGe alloy nanowire wrapped with a Ge nanoparticle-embedded SiO2 shell.

We demonstrate silicon germanium (SiGe) alloy nanowires (NWs) with Ge nanoparticles (GeNPs) embedded in a SiO2 shell as a material for decreasing thermal conductivity. During thermal oxidation of SiGe NWs to form SiGe-SiO2 core-shell structures, Ge atoms were diffused into the SiO2 shell to relax the strain in the SiGe core, and agglomerated as a few nanometer-sized particles. This structure leads to a large reduction in thermal conductivity due to the GeNP-phonon interaction, while electrical conductivity is sustained because the core of the SiGe alloy NW provides a current path for the charged carriers. The thermal conductivity of the SiGe alloy NWs wrapped with a GeNP-embedded SiO2 shell is 0.41 W m(-1) K(-1) at 300 K.

Tuning complex transition metal hydroxide nanostructures as active catalysts for water oxidation by a laser-chemical route.

Diverse transition metal hydroxide nanostructures were synthesized by laser-induced hydrolysis in a liquid precursor solution for alkaline oxygen evolution reaction (OER). Several active OER catalysts with fine control of composition, structure, and valence state were obtained including (Lix)[Ni0.66Mn0.34(OH)2](NO3)(CO3) · mH2O, Lix[Ni0.67Co0.33(OH)2](NO3)0.25(ORO)0.35 · mH2O, etc. An operate overpotential less than 0.34 V at current density of 10 mA cm(-2) was achieved. Such a controllable laser-chemical route for assessing complex nanostructures in liquids opens many opportunities to design novel functional materials for advanced applications.

Benchmarking hydrogen evolving reaction and oxygen evolving reaction electrocatalysts for solar water splitting devices.

Objective comparisons of electrocatalyst activity and stability using standard methods under identical conditions are necessary to evaluate the viability of existing electrocatalysts for integration into solar-fuel devices as well as to help inform the development of new catalytic systems. Herein, we use a standard protocol as a primary screen for evaluating the activity, short-term (2 h) stability, and electrochemically active surface area (ECSA) of 18 electrocatalysts for the hydrogen evolution reaction (HER) and 26 electrocatalysts for the oxygen evolution reaction (OER) under conditions relevant to an integrated solar water-splitting device in aqueous acidic or alkaline solution. Our primary figure of merit is the overpotential necessary to achieve a magnitude current density of 10 mA cm(-2) per geometric area, the approximate current density expected for a 10% efficient solar-to-fuels conversion device under 1 sun illumination. The specific activity per ECSA of each material is also reported. Among HER catalysts, several could operate at 10 mA cm(-2) with overpotentials <0.1 V in acidic and/or alkaline solutions. Among OER catalysts in acidic solution, no non-noble metal based materials showed promising activity and stability, whereas in alkaline solution many OER catalysts performed with similar activity achieving 10 mA cm(-2) current densities at overpotentials of ~0.33-0.5 V. Most OER catalysts showed comparable or better specific activity per ECSA when compared to Ir and Ru catalysts in alkaline solutions, while most HER catalysts showed much lower specific activity than Pt in both acidic and alkaline solutions. For select catalysts, additional secondary screening measurements were conducted including Faradaic efficiency and extended stability measurements.

Benchmarking heterogeneous electrocatalysts for the oxygen evolution reaction.

Objective evaluation of the activity of electrocatalysts for water oxidation is of fundamental importance for the development of promising energy conversion technologies including integrated solar water-splitting devices, water electrolyzers, and Li-air batteries. However, current methods employed to evaluate oxygen-evolving catalysts are not standardized, making it difficult to compare the activity and stability of these materials. We report a protocol for evaluating the activity, stability, and Faradaic efficiency of electrodeposited oxygen-evolving electrocatalysts. In particular, we focus on methods for determining electrochemically active surface area and measuring electrocatalytic activity and stability under conditions relevant to an integrated solar water-splitting device. Our primary figure of merit is the overpotential required to achieve a current density of 10 mA cm(-2) per geometric area, approximately the current density expected for a 10% efficient solar-to-fuels conversion device. Utilizing the aforementioned surface area measurements, one can determine electrocatalyst turnover frequencies. The reported protocol was used to examine the oxygen-evolution activity of the following systems in acidic and alkaline solutions: CoO(x), CoPi, CoFeO(x), NiO(x), NiCeO(x), NiCoO(x), NiCuO(x), NiFeO(x), and NiLaO(x). The oxygen-evolving activity of an electrodeposited IrO(x) catalyst was also investigated for comparison. Two general observations are made from comparing the catalytic performance of the OER catalysts investigated: (1) in alkaline solution, every non-noble metal system achieved 10 mA cm(-2) current densities at similar operating overpotentials between 0.35 and 0.43 V, and (2) every system but IrO(x) was unstable under oxidative conditions in acidic solutions.