Heavy metal deposition and parameter change of soft contact lenses by exposure to particulate matter : Parameter change of SCL due to exposure to PM and heavy metal deposition.

BACKGROUND: Particulate matter (PM) is known to contain heavy metals and be harmful to the tissues and organs of the human body including the eyes. As such, in this study, the deposition of heavy metals from PM on soft contact lenses was examined, and changes in the lens parameters were further investigated. METHODS: Six types of soft contact lenses were exposed to captured PM10 for eight hours. The central thickness, water content, refractive power, and oxygen transmissibility of each contact lens were measured after analyzing the amounts of six heavy metals adsorbed on the contact lenses. RESULTS: Lead, manganese, barium, arsenic, vanadium, and cadmium were detected in the captured PM, and only lead was adsorbed on all soft contact lenses except senofilcon C. The largest deposition was 23.21 ± 0.70 (10- 3)µg/lens of the lead on lotrafilcon B. The oxygen transmissibility of nelfilcon A exhibited statistically significant changes, however, it was within the ISO standard tolerance. Nevertheless, changes in the central thickness, water content, and refractive power of each soft contact lens were not statistically significant. CONCLUSIONS: This study revealed that a considerable amount of lead in PM10 was adsorbed on soft contact lenses. Amongst lens parameters, only oxygen transmissibility changed significantly. Thus, wearing soft contact lenses under high PM10 concentration might affect the physiology of the eyes.

Transvenous lead extraction using the TightRail mechanical rotating dilator sheath for Asian patients.

The need for transvenous lead extraction (TLE) is increasing worldwide including in Asia-Pacific regions. However, supporting evidence for TightRail, a relatively new rotating mechanical dilator sheath, is still lacking in Asian patients. The efficacy and safety of TLE using TightRail performed between March 2018 and June 2021 were evaluated in 86 consecutive patients with 131 leads. The mean lead age was 11.7 ± 7.3 (range, 1.0-41.4) years. Clinical and complete procedural success using TightRail were achieved in 93.0% and 89.5% of 86 patients, respectively, with 6 min of median fluoroscopic time and 9.3% of major complication rate: death (1.2%), cardiac tamponade (3.5%), severe tricuspid regurgitation (3.5%), and stroke (1.2%). However, in 46 patients with longest lead age ≤ 10 years, clinical/complete success and major cardiac complication rates turned out better as 97.8%, 95.7%, and 2.2%, respectively. Additionally, when patients were divided into 3 groups: the first 28, second 29, and the last 29 patients, there was a clear trend toward better efficacy and safety outcomes with more experience with TightRail (Ptrend < 0.05). Longest lead age > 10 years was closely associated with TLE-related major cardiac complication (P = 0.046) with 85.7% sensitivity, 57.0% specificity, 15.0% positive predictive value, and 97.8% negative predictive values. In conclusion, TLE using TightRail may be effectively and safely performed by experienced operators for Asian patients with the longest lead age ≤ 10 years. However, as TightRail is a potentially aggressive tool, special attention should be paid to patients with longer lead dwelling times (e.g., > 10 years).

Synthesis of PbMoO4 Nanoparticles Using a Facile Surfactant-Assisted Microwave Process and Their Photocatalytic Activity.

Lead molybdate (PbMoO4) materials were successfully synthesized using a facile surfactant-assisted microwave process and characterized by XRD, Raman, PL, BET and DRS. We also investigated the photocatalytic activity of these materials for the decomposition of Rhodamine B under UV-light irradiation. The XRD and Raman results revealed the successful synthesis of 42­69 nm, well-crystallized PbMoO4 crystals with a facile surfactant-assisted microwave process. The PbMoO4 catalysts prepared using microwave process enhanced the photocatalytic activity compared to PbMoO4 catalyst prepared by hydrothermal method. The PbMoO4 catalyst prepared at 100 °C showed the highest photocatalytic activity. The PL peak was appeared at about 540 nm for all catalysts and the excitonic PL signal was proportional to the photocatalytic activity for the decomposition of Rhodamine B.

Complete Oxidation of Benzene Over CuO-CeO2 Catalysts Prepared Using Different Process.

Catalytic combustion of benzene over CuO-CeO2 mixed oxides has been investigated. The CuO-CeO2 mixed oxides were prepared using various methods and characterized by XRD, BET and TPR. For the CuO-CeO2 catalysts with a Cu/(Cu + Ce) molar ratio of more than 0.5, highly dispersed copper oxide species were shown at 2θ = 35.5 degrees and 38.8 degrees. The CuO-CeO2 catalyst prepared using co-precipitation method showed the highest activity. In addition, the highest activity is shown on Cu0.35 (the index denotes the molar ratio Cu/(Cu + Ce)) sample and then it decreases on Cu0.5 and Cu0.6 samples.

Catalytic Oxidation of Benzene Over LaCoO3 Perovskite-Type Oxides Prepared Using Microwave Process.

LaCoO3 perovskite type oxides were successfully prepared using microwave-assisted method, characterized by TG/DTA, XRD, XPS and H2-TPR and their catalytic activities for combustion of benzene were determined. Almost of catalyst showed perovskite crystalline phase and 13-84 nm particle size. LaCoO3 catalysts prepared by microwave-assisted method showed the highest activity and the conversion reached almost 100% at 360 degrees C. In the LaCoO3-type catalyst, the partial substitution of Sr into site A enhanced the catalytic activity on the combustion of benzene. The higher amount of the chemisorbed oxygen was, the better the performance of the combustion catalyst. The catalytic activity of perovskite-type oxides showed a good relationship with the results of H2-TPR and XPS measurement.

Catalytic combustion of benzene over CuO-CeO2 mixed oxides.

Catalytic combustion of benzene over CuO-CeO2 mixed oxides has been investigated. The CuO-CeO2 mixed oxides were prepared by the combustion method using malic acid as an organic fuel and characterized by XRD, XPS and TPR. For the CuO-CeO2 catalyst with a Cu/(Cu + Ce) molar ratio of more than 0.4, highly dispersed copper oxide species were shown at 2θ = 35.5 degrees and 38.8 degrees. The CuO-CeO2 catalyst prepared using 2.0 M malic acid showed the highest activity, with conversion reaching nearly 100% at 350 degrees C. In addition, the highest activity is shown on Cu0.40 (the index denotes the molar ratio Cu/(Cu + Ce)) sample and then it decreases on Cu0.5 and Cu0.7 samples.

Catalytic combustion of benzene over nanosized LaMnO3 perovskite oxides.

In this study, LaMnO3 perovskite type oxides were successfully prepared using the malic acid method. The oxides were characterized by TG/DTA, XRD, XPS, TEM and H2-TPR and their catalytic activities for the combustion of benzene were determined. Almost all of the catalysts showed perovskite crystalline phase and had a particle size of 15-60 nm. The LaMnO3 catalysts prepared with more than 1.0 mol of malic acid showed the highest activity and the conversion reached almost 100% at 310 degrees C. The catalysts were modified to enhance the activity by substituting the metal at the A or B site of the perovskite oxides. In the LaMnO3-type catalyst, the partial substitution of Sr into site A enhanced the catalytic activity during benzene combustion. In addition, the partial substitution of Co into site B also increased the catalytic activity and the catalytic activity was in the following order: Co > Cu > Fe in the LaMn1_xBxO3(B = Co, Fe, Cu) type catalysts.

Synthesis of Pb-substituted LaCoO3 nanoparticles by microwave process and their photocatalytic activity under visible light irradiation.

In this study, nanosized lead-substituted perovskite type oxides, La1_xPbxCoO3, were successfully synthesized using a microwave-assisted method and characterized by TG/DTA, XRD, XPS, TEM and DRS. We also investigated the photocatalytic activity of these oxides for the decomposition of methyl orange. From XRD results, metal replacement with the Pb ion in the crystal lattice does not change the high crystallinity of the perovskite structure. When Pb ions are substituted into site A, the particle size decreased when compared to lead-free LaCoO3 perovskite type oxide. In the of UV-Vis DRS analysis, all the catalysts displayed the similar absorption spectrum up to the visible region and the absorption band shifted to a higher wavelength on the lead-substituted LaCoO3 perovskite oxides when compared to the lead-free LaCoO3 oxide. From XPS results, chemisorbed oxygen was shown to play an important role in the photocatalytic decomposition of methyl orange and the higher chemisorbed oxygen content, the better the performance of the photocatalyst.

Eligibility criteria in knee osteoarthritis clinical trials: systematic review.

There is an increasing concern over generalizability of trial results. We investigated eligibility criteria of knee osteoarthritis clinical trials. Eligible trials were randomized, placebo-controlled trials that were identified by searches in MEDLINE, SCOPUS, and the Cochrane Central Register of Controlled Trials. We then attempted to extract data on the eligibility criteria by employing predetermined criteria. From 355 randomized knee osteoarthritis trials, we reviewed data categorized by non-osteoarthritis-related and osteoarthritis-related factors. A variety of items were used in the eligibility criteria. Regarding the non-osteoarthritis-related factors, ethical considerations, such as inability to give an informed consent (79.4 %) or medical conditions potential for risks by test treatments (56.0 %) or by participation in a trial (57.2 %), were the common reasons for excluding patients from a trial. Concerning the osteoarthritis-related factors, most of the trials did not specify age and symptom severity. When trials specifying these items were investigated, patients with 40 to 80 years in age and grade 2 in the Kellgren-Lawrence scale were mostly included into a trial. For the pain intensity, patients with ≥20-40 in the 100-mm visual analog scale and ≥6-8 in the WOMAC pain subscale were commonly enrolled into a trial. These findings warrant further investigation on the generalizability of trial results.

Photocatalytic decomposition of methyl orange over nanosized perovskite-type oxides under visible light irradiation.

In this study, we have investigated the photocatalytic activity for the decomposition of methyl orange on the LaCoO3 perovskite-type oxides prepared using sol-gel method at different conditions. From the results of UV-Vis DRS, all the catalysts have the similar absorption spectrum up to visible region. The LaCoO3 catalyst prepared at 1.5 mol of malic acid and calcined at 350 degrees C shows the highest activity. The amount of photo absorption in the visible region is correlated with the photocatalytic activity. In addition, the chemisorbed oxygen plays an important role on the photocatalytic decomposition of methyl orange and the higher are the contents of chemisorbed oxygen, the better shows the performance of photocatalyst.

Changes of N/L ratio and cortisol levels associated with experimental training in untrained rhesus macaques.

BACKGROUND: Animal training prior to beginning an experiment is an essential procedure and a very important course because it may affect the results of hematologic and hormonal variables and the functions influenced by those factors. Because this training inevitably causes animal stress, we wondered how much time is needed for untrained monkeys to recover from stresses associated with experimental training. METHODS: We measured the hematological and stress hormonal (e.g., cortisol) changes on weekly basis before and after experimental monkey chair training in newly acquired rhesus monkeys. RESULTS: The neutrophil-to-lymphocyte (N/L) ratio significantly increased during the initial phase of the training and then gradually decreased after 3 weeks. Elevated serum cortisol levels in the initial phase also significantly decreased after 3 weeks of chair training. CONCLUSIONS: We conclude that at least a 3-week period is needed in monkey chair training for recovery from training stress. These results suggest that many researchers using nonhuman primates should provide enough time (>3 weeks) for adaptation to the experimental environment prior to beginning a study.

Time Course of Placebo Effect of Acupuncture on Pain: A Systematic Review.

Objectives. Our objective was to investigate the time course of the placebo effect of acupuncture on pain and the factors affecting the placebo effect. Methods. Previously we retrieved three-armed randomized acupuncture trials including sham and no-treatment groups which were published until October 2009. We searched electronic databases again to identify additional trials from October 2009 to December 2011. After a screening of trials, fifteen three-armed acupuncture trials for pain were included in the analysis. Standardized mean differences between the sham and no-treatment groups were calculated for placebo effect. We then plotted the magnitude of the placebo effect over time. Results. The placebo effect gradually has increased for 12 weeks with a standardized mean difference of 0.74 (95% CI: 0.54 to 0.94). Then it decreased after 12 weeks as time passed. When the placebo effects were compared for factors including methodological qualities, they were not affected by all factors, except patient blinding. Trials with sufficient patient blinding showed a larger placebo effect at 8 weeks than those with insufficient patient blinding (P = 0.0009). Conclusion. The placebo effect of acupuncture showed a unique pattern, which was affected by insufficient patient blinding.

Heavy metal concentrations in hair of newly imported China-origin rhesus macaques (Macaca mulatta).

Macaque monkeys are good sentinel to humans for environmental pollutions because their similarities in genetic and physiological characteristics. So, their reference values about exposures to heavy metals are required for proper data interpretation. Here, we report several heavy metals concentrations in the hair of rhesus monkeys which are widely used in biomedical research. The hair of 28 imported rhesus monkeys from an animal farm in southwest China were examined for the presence of eight heavy metals (Arsenic, Beryllium, Cadmium, Chromium, Iron, Lead, Mercury, and Selenium). The analyzed data in parts per million (ppm) for hair concentrations of heavy metals in rhesus monkeys were as follow: As (0.654±0.331), Be (0.005±0.003), Cd (0.034±0.022), Cr (11.329±4.259), Fe (87.106±30.114), Pb (0.656±0.613), Hg (0.916±0.619), and Se (3.200±0.735). The concentrations of Be, Cr, and As showed significant higher in females than in males (P<0.05). We present here the reference values of several heavy metals in healthy China-origin rhesus monkeys. These data may provide valuable information for veterinarians and investigators using rhesus monkeys in experimental studies.

Reference values of hematology, chemistry, electrolytes, blood gas, coagulation time, and urinalysis in the Chinese rhesus macaques (Macaca mulatta).

BACKGROUND: Due to increasing preclinical study using the rhesus monkeys, the physiological data of these monkeys are very important for the objective evaluation of experimental results. Here, we report the physiological values of the Chinese rhesus monkeys acclimated under a well-controlled laboratory environment. METHODS: Seventy healthy rhesus monkeys of both genders (29 males and 41 females) were used in this study. Available data on hematology, serum biochemistry, electrolytes, blood gas, coagulation time, urinalysis, water consumption, urine volume, and body weight were examined. RESULTS: The lymphocyte values were 1.5-2.5 times higher than the neutrophil values in both genders. In serum biochemistry, there was no significant difference between the two genders. Interestingly, the values of alkaline phosphatase from the monkeys were very high. According to isoenzyme analysis, the percentage of alkaline phosphatase that originated from the bone was 60%, and this value was significantly higher than that from the liver (39%, P = 0.020). CONCLUSION: Physiological data are very important parameters that can be directly and indirectly related to organ function (e.g. islet, kidney, liver, heart, etc.) in the transplantation model. In this respect, our data constitute valuable references for preclinical study using the Chinese rhesus monkeys.

Synthesis of TiO2 supported on SBA-15 using different method and their photocatalytic activity.

SBA-15 mesoporous materials were successfully prepared by the conventional hydrothermal method and TiO2 nanoparticles were supported on them using different loading methods. The synthesized materials were characterized and their activity as photocatalysts for the decomposition of methylene blue was evaluated. The loading of titanium dioxide on the framework of SBA-15 makes the pore diameter and pore volume decrease compared to that of SBA-15. The chelating method causes the support to have a much better dispersion capacity for TiO2 particles as compared to the other two methods. The TiO2 supported by chelating method showed the highest photocatalytic activity among the photocatalysts prepared by different method.

Catalytic combustion of benzene over copper oxide supported on SBA-15 using chelating method.

The catalytic combustion of benzene over copper oxide supported on SBA-15 was investigated. The catalysts were prepared by the using chelating method and characterized. It is clear that the loading of CuO on the silica matrix drastically decreases the surface area and pore volume of the catalysts, as would be expected for the incorporation of CuO. The catalytic activity increased with an increase of CuO loading ratio. When CuO loading reached 5.8 wt%, the total conversion temperature was lowered to 350 degrees C.

Synthesis of TiO2 supported on SBA-15 using chelating method and their photocatalytic decomposition of methylene blue.

SBA-15 mesoporous materials were successfully prepared by the conventional hydrothermal method and used as the support for TiO2 loaded SBA-15 photocatalysts. The synthesized materials were characterized by XRD, PL, FT-IR, BET and TEM. We also examined the activity of these materials as photocatalysts for the decomposition of methylene blue. The loading of titanium dioxide on the framework of SBA-15 makes the pore diameter and the pore volume decrease and decreases the surface area compared to that of SBA-15. For the TiO2 loaded SBA-15 photocatalysts, the IR absorption at approximately 960 cm(-1) is commonly accepted as the characteristic vibration of the Ti-O-Si bond. The PL peaks appears at about 410 nm at a loading ratio of less than 5% but moves to 430 nm at higher loading ratios. It was also shown that the excitonic PL signal is proportional to the photocatalytic activity for the decomposition of methylene blue. The photocatalytic activity increases with increasing TiO2 loading ratio, shows a maximum value at 7% TiO2/SBA-15, and then decreases at 10% TiO2/SBA-15.

Anti-amnesic effect of ESP-102 on Aß(1-42)-induced memory impairment in mice.

The aim of this study was to characterize the effects of ESP-102 on the memory impairments and pathological changes induced by amyloid-ß (Aß)(1-42) peptide in mice. The ameliorating effect of ESP-102 on memory impairment was investigated using the passive avoidance and the Morris water maze tasks, and the pathological changes were identified by immunohistochemistry and western blotting. Aß(1-42) peptide (3µg/3µl) was administered by intracerebroventricular injection. By the single administration of ESP-102 (100mg/kg, p.o), the memory impairment induced by Aß(1-42) peptide was significantly attenuated (P<0.05). Moreover, ESP-102 (100mg/kg, p.o) significantly inhibited acetylcholinesterase (AChE) activity in the hippocampus compared to the Aß(1-42) peptide-injected control group. In the subchronic treatment study, ESP-102 (50 or 100mg/kg/day, p.o) administration for seven days ameliorated the memory impairments induced by Aß(1-42) peptide. Moreover, ESP-102 inhibited lipid peroxidation induced by Aß(1-42) peptide in the hippocampus. Aß(1-42)-induced increases in the expression of GFAP (an astrocyte marker) and inducible nitric oxide synthase (iNOS) in the hippocampal region were also attenuated by ESP-102 treatment. These results suggest that the ameliorating effect of ESP-102 on Aß(1-42) peptide-induced memory impairment is mediated via its AChE inhibitory, antioxidative, and/or anti-inflammatory activities.

Neocortical temporal lobe epilepsy: intracranial EEG features and surgical outcome.

Patients with neocortical temporal lobe epilepsy (NTLE) may have less favorable outcome with anterior temporal lobectomy than those with mesial temporal foci. The authors analyzed ictal intracranial electroencephalograms (EEGs) in patients with NTLE to identify features that predict surgical outcome. The following intracranial ictal EEG features in 31 consecutive medically intractable NTLE patients were studied: Frequency (i.e., low-voltage fast [>20 Hz], recruiting ictal-onset spikes, ictal-onset rhythms less than 5 Hz, ictal-onset rhythms with repetitive sharp waves between 5 and 20 Hz); extent of ictal onset (focal, sublobar, and lobar); localization within the temporal lobe (anterior, posterior, or regional); and the time to seizure spread outside the temporal lobe (rapid, intermediate, and slow). The average follow-up period was 36.7 months (range, 18 to 60 months). Findings between two outcome groups were compared: class I group (seizure-free) and class II to IV group (persistent seizures). Twenty-one (66.7%) of 31 patients with NTLE were seizure-free. Intracranial EEG features which were significantly associated with seizure-free outcome were focal or sublobar onset, anterior temporal onset, and slow propagation time (P < 0.05). There was a trend for patients with ictal onset morphologies of slow ictal-onset rhythm and repetitive sharp waves to be seizure-free (P = 0.07). Intracranial EEG is helpful in predicting surgical outcome in NTLE patients.