Automated method using direct-immersion solid-phase microextraction and on-fiber derivatization coupled with comprehensive two-dimensional gas chromatography high-resolution mass spectrometry for profiling naphthenic acids in produced water.

Naphthenic acids (NAs) are naturally occurring organic acids in petroleum and are found in waste waters generated during oil production (produced water, PW). Profiling this class of compounds is important due to flow assurance during oil exploration. Compositional analysis of PW is also relevant for waste treatment to reduce negative impacts on the environment. Here, comprehensive two-dimensional gas chromatography coupled with high-resolution mass spectrometry (GC×GC-HRMS) was applied as an ideal platform for qualitative analysis of NAs by combining the high peak capacity of the composite system with automated scripts for group-type identification based on accurate mass measurements and fragmentation patterns. To achieve high-throughput profiling of NAs in PW samples, direct-immersion solid phase microextraction (DI-SPME) was selected for extraction, derivatization and preconcentration. A fully automated DI-SPME method was developed to combine extraction, fiber rinsing and drying, and on-fiber derivatization with N-methyl-N­tert-butyldimethylsilyltrifluoroacetamide (MTBSTFA). Data processing was based on filtering scripts using the Computer Language for Identifying Chemicals (CLIC). The method successfully identified up to 94 NAs comprising carbon numbers between 6 and 18 and hydrogen deficiency values ranging from 0 to -4. The proposed method demonstrated wider extraction coverage compared to traditional liquid-liquid extraction (LLE) - a critical factor for petroleomic investigations. The method developed also enabled quantitative analysis, exhibiting detection limits of 0.5 ng L-1 and relative standard deviation (RSD) at a concentration of NAs of 30 µg L-1 ranging from 4.5 to 25.0%.

Determination of naphthenic acids in produced water by using microchip electrophoresis with integrated contactless conductivity detection.

This study reports for the first time the use of a microchip electrophoresis (ME) device with integrated capacitively coupled contactless conductivity detection (C4D) to analyze naphthenic acids in produced water. A mixture containing 9-anthracenecarboxylic, 1-naphthoic, and benzoic acids was separated and detected using a running buffer composed of 10 mmol L-1 carbonate buffer (pH = 10.2). The separation was achieved within ca. 140 s with baseline resolution greater than 2 and efficiency values ranging from 1.9 × 105 to 2.4 × 105 plates m-1. The developed methodology provided linear correlation with determination coefficients greater than 0.992 for the concentration ranges between 50 and 250 µmol L-1 for benzoic and 9-anthracenecarboxylic acids, and between 50 and 200 µmol L-1 for 1-naphthoic acid. The achieved limit of detection values varied between 4.7 and 7.7 µmol L-1. The proposed methodology revealed satisfactory repeatability with RSD values for a sequence of eight injections between 5.5 and 7.7% for peak areas and lower than 1% for migration times. In addition, inter-day precision was evaluated for sixteen injections (a sequence of four injections performed during four days), and the RSD values were lower than 11.5 and 4.9% for peak areas and migration time, respectively. Five produced water samples were analyzed, and it was possible to detect and quantify 9-anthracenecarboxylic acid. The concentrations ranged from 1.05 to 2.24 mmol L-1 with recovery values between 90.8 and 96.0%. ME-C4D demonstrated satisfactory analytical performance for determining naphthenic acids in produced water for the first time, which is useful for petroleum or oil industry investigation.

Profiling naphthenic acids in produced water using hollow fiber liquid-phase microextraction combined with gas chromatography coupled to Fourier transform Orbitrap mass spectrometry.

In this study, we describe the development of an analytical method to profile naphthenic acids (NAs) from produced water (PW). The NAs were isolated by hollow fiber liquid-phase microextraction (HF-LPME). A microwave-assisted methylation method was used to convert the free acids into its corresponding naphthenic methyl esters (NAMEs). The best reaction conditions were ascertained using central composite design. The optimized sample preparation method exhibited an improved analytical eco-scale value (80 vs. 61) compared to conventional liquid-liquid extraction. Although the primary goal was qualitative analysis of NAMEs (e.g., group-type separation) in produced water, the quantitative performance was also evaluated for future investigations. The instrumental detection and quantification limits were 0.10 ng mL-1 and 0.16 ng mL-1, respectively, using full spectrum data acquisition. The accuracy and precision of the proposed method ranged from 90.4 to 96.6 % and 3.3 to 13.1 %, respectively, using matrix-matched working solutions (0.1, 0.5, and 1.0 µg mL-1). The monoisotopic masses of the adduct ions ([M+H]+) and its corresponding fine isotopic patterns were used to determine the elemental composition of the NAMEs in the PW samples. Qualitative analysis indicated the O2 class as the predominant class in all samples with carbon numbers ranging from C5 to C19 and double bond equivalent (DBE) values of 1 to 8. Additional classes of polar compounds, i.e., O3, O4 and nitrogen-containing classes, are reported for the first time by gas chromatography coupled to Fourier transform Orbitrap mass spectrometry and chemical ionization.