Biomechanical behavior of three different types of internal tapered connections after cyclic and static loading tests: experimental in vitro.

BACKGROUND: In the long-term success of a dental implant, the reliability and stability of the implant-abutment interface are important. Studies of maximum force of dental implants with different loading values have been used. This study aims to evaluate the influence of the oblique cyclic loading on the maximum force supported in one-piece and two-piece abutments installed on internal tapered implants. FINDINGS: Sixty implants and sixty prosthetic abutments were divided into six groups (n = 10): G1 and G2 (two-piece abutments with 16°), G3 and G4 (two-piece abutments with 11.5°), and G5 and G6 (one-piece abutments with 11.5°). A 2-Hz cyclic loading was applied to specimens of G2, G4, and G6, with a number of cycles of 2,400,000. All specimens were inclined by 30° from the vertical axis, and a vertical loading was applied over the tapered connections (ISO 14801). Then, the maximum force was tested by applying a static compression load on the specimens of the 6 groups tested (30°) at a rate of 0.5 mm/s. Statistical analysis was performed using the Shapiro-Wilk (p > 0.05) and Levene (p = 0.789) tests to determine if the data presented homoscedasticity and the Tukey test for multiple comparisons. Tukey test showed that the maximum force supported by G1 and G2 was not affected by the cyclic load, while in G3 and G4 it decreased significantly when subjected to the cyclic load. The G5 and G6 had a significant increase in maximum force supported when subjected to cyclic load. CONCLUSIONS: Cyclic loading influenced the maximum force supported of G4 and G6 but did not influence G2.

Is there an association between sleep bruxism and obstructive sleep apnea syndrome? A systematic review.

PURPOSE: To elucidate current knowledge on the potential association and causality between sleep bruxism (SB) and obstructive sleep apnea (OSA) using full-night polysomnography. METHODS: Search strategies were developed for PubMed, Web of Science, Cochrane, LILACS, MEDLINE, and BBO-ODO and conducted until May 2019. The methodological quality was evaluated using the Qu-ATEBS tool. RESULTS: Two hundred seventy articles were identified and after independent screening of abstracts by two authors, 17 articles underwent full-text reading. Ten articles were excluded for not meeting the inclusion criteria and 7 were included in qualitative synthesis. Four studies support the association between SB and OSA: (a) a subtype of OSA patients may have SB as a protective response to respiratory events, (b) most episodes of bruxism occur shortly after the end of apnea/hypopnea (AH) events, (c) bruxism episodes occur secondary to arousals arising from AH events, and (d) there is a correlation between the frequency of SB and AH events, and three studies did not support: (e) AH episodes are related to non-specific SB oromotor activities, (f) SB episodes are not directly associated with the end of AH events, and (g) patients with OSA did not experience more SB events than control group. CONCLUSION: There is no scientific evidence to support a conclusive relationship between SB and OSA. Further, well-designed and randomized studies with control groups are needed to investigate whether possible mechanisms common to SB and OSA exist and whether OSA treatment could improve SB negative oral health outcomes in patients with SB and comorbidity of OSA.

Influence of radiotherapy on the dentin properties and bond strength.

OBJECTIVES: The objective of this study was to evaluate the biomechanical properties of dentin and the microtensile bond strength (µTBS) performed before or after radiotherapy (RT). MATERIAL AND METHODS: Dentin chemical composition (infrared spectroscopy-FTIR), SEM images, and mechanical properties (Vickers microhardness-VHN and elastic modulus-E) were evaluated comparing no irradiated and irradiate dentin (n = 5). RT was defined by application of 72 Gy (1.8 Gy daily, 5 days per week, during 8 weeks) with sample immersed in distilled water. µTBS evaluated three groups (n = 10): NI-no irradiated; IB-irradiation before restoration; and IA-irradiation after restoration. Resin-dentin sticks (1.0 mm2) were obtained and submitted to µTBS. Analysis of the bonding interface was made by confocal microscopy. RESULTS: After RT, percentage ratio of FTIR analysis showed increased absorption for all bands. SEM image showed a disorganized dentin structure. Two-way ANOVA showed increased VHN (p = 0.005) and decreased E (p < 0.001). For µTBS, one-way ANOVA and Duncan test showed significant differences among groups (p = 0.018). IB group presented the lowest bond strength values. CONCLUSIONS: RT alters the absorption bands and SEM images showed a disorganization of the dentin structure. Mechanical properties were changed with increased VHN and decreased E. µTBS was affected by the radiotherapy and restoration period (before or after). CLINICAL RELEVANCE: RT causes changes that contribute to increased risk of tooth decay. Restorative treatments can be performed using adhesive procedures, but it is preferable to be performed before of the irradiation protocol, to guarantee better adhesive properties to restoration.

Influence of Screw Surface Treatment on Retention of Implant-Supported Fixed Partial Dentures.

The aim of this study was to assess the effect of a diamond-like carbon (DLC) coating on the removal torque of prefabricated implant screws after cyclic loading. Four groups with two crowns supported by two implants (n = 5) were obtained according to splinted and nonsplinted prosthesis, using titanium or DLC screws (splinted crowns with titanium screw [STi], splinted crowns with DLC screw [SC], nonsplinted crowns and titanium screw [NSTi], and nonsplinted crowns and DLC screw [NSC]). The prosthetic screws were tightened at 32 Ncm and retightened, and the specimens were submitted to 106 mechanical cycles (4 Hz/98 N). After cyclic loading, loosening torque was evaluated, and the final measurements were performed. Data were analyzed by two-way analysis of variance and Tukey's test (α = .005). There was statistically significance in the interaction of screw × splinting (P = .003). For the group that used titanium screws, NSTi showed smaller removal torque compared with STi. It was concluded that the use of the DLC coating screws in nonsplinted prosthesis maintain the torque after cyclic loading.

The influence of interproximal contact on implant-supported fixed partial dentures in the posterior jaw: a photoelastic analysis.

The aim of this study was to analyze the effect of the separation of prosthetic crowns from fixed partial dentures by means of stress gradient evaluation. Three photoelastic models were created to examine contiguous implants with varying contact between the crowns (contact point [CP], contact surface [CS], splinted [SP]). The SP group presented the best results, followed by the CS group, indicating that the use of splinted prosthetic crowns and crowns with broad surface contacts is viable when considering the stress values.