ABSTRACT
An optical fibre radiation dosemeter has been developed that utilises optically stimulated luminescence and scintillation to provide independent, remote, real-time dose measurements. The radiation sensitive element consists of a 1 mm long, 0.4 mm diameter piece of copper-ion-doped fused quartz that is attached to a 1 m length of commercial optical fibre. The dosemeter probe is 0.6 mm in diameter and is flexible enough to be used in standard medical catheters for internal radiation dose measurements. A four-channel dosemeter system has been built and characterised under conditions typical of a radiotherapy environment. The device exhibits a linear response over the range of doses from 0.01 Gy to 10 Gy. The dosemeter responds identically to both electrons and photons in the range from 4 to 20 MV and the calibration was retained to within +/-2% over a period of 4 weeks. The fibre dosemeter has been used successfully to verity doses received by three patients receiving radiotherapy treatments.
Subject(s)
Radiometry/instrumentation , Calibration , Electrons , Equipment Design , Glass , Luminescent Measurements , Optics and Photonics , PhotonsABSTRACT
Operation of an f/5 thermal-defocusing/scattering optical limiter is described. Thermal-defocusing limiting of 6-ns-duration, 532-nm laser pulses occurs by use of the broadband-absorbing dye Nigrosin dissolved in carbon disulfide. Additional limiting due to thermally induced scattering occurs at high incident fluences (above a threshold fluence) when either surface-roughened BASF-1 glass windows are in contact with the dye solution or microscopic glass fibers are added to the liquid cell. Limiter figures of merit are improved by factors of 2 and 4, respectively, over that of a purely thermal-defocusing limiter.
ABSTRACT
The fabrication and characterization of a glass containing a regular parallel array of submicrometer channels or capillaries are described. The capillaries are arranged in a two-dimensional hexagonal close packing configuration with channel diameters as small as 33 nanometers and packing densities as high as 3 x 10(10) channels per square centimeter. The high-temperature stability of the nanochannel glass array is well suited as a host or template for the formation of quantum confined semiconductor structures or as a mask for massively parallel patterned lithographic applications.
ABSTRACT
We report lasing characteristics of 40-60-microm-diameter Rhodamine 590/water solution droplets pumped by a 20-nsec-duration Q-switched laser. The Rhodamine/water solution provides a useful model system for studying the properties of oscillators based on whispering-gallery-wave spherical cavities. The low threshold for lasing, 10(4) W/cm(2) for 10(-4) M solutions, is consistent with particle size and a cavity Q factor of 10(4). Portions of the droplet lase purely in transverse electric (TE) modes, while other portions contain both TE and lower-Q transverse magnetic modes. In the far field, the lasing droplet approximates a coherent point source emitting in all directions.
