Editorial: acceptance criteria and editorial procedures for Optics Letters.

Optics Letters Editors strive to provide timely reviews and decisions for authors while bringing top quality papers to the optics community. The purpose of this editorial is to explain Optics Letters' acceptance criteria and editorial procedures. Our hope is that greater transparency concerning the decision-making process will increase understanding as well as acceptance of our criteria and procedures.

Characterization of a gated fiber-optic-coupled detector for application in clinical electron beam dosimetry.

PURPOSE: Assessment of the fundamental dosimetric characteristics of a novel gated fiber-optic-coupled dosimetry system for clinical electron beam irradiation. METHODS: The response of fiber-optic-coupled dosimetry system to clinical electron beam, with nominal energy range of 6-20 MeV, was evaluated for reproducibility, linearity, and output dependence on dose rate, dose per pulse, energy, and field size. The validity of the detector system's response was assessed in correspondence with a reference ionization chamber. RESULTS: The fiber-optic-coupled dosimetry system showed little dependence to dose rate variations (coefficient of variation +/- 0.37%) and dose per pulse changes (with 0.54% of reference chamber measurements). The reproducibility of the system was +/- 0.55% for dose fractions of approximately 100 cGy. Energy dependence was within +/- 1.67% relative to the reference ionization chamber for the 6-20 MeV nominal electron beam energy range. The system exhibited excellent linear response (R2 = 1.000) compared to reference ionization chamber in the dose range of 1-1000 cGy. The output factors were within +/- 0.54% of the corresponding reference ionization chamber measurements. CONCLUSIONS: The dosimetric properties of the gated fiber-optic-coupled dosimetry system compare favorably to the corresponding reference ionization chamber measurements and show considerable potential for applications in clinical electron beam radiotherapy.

Performance characteristics of a gated fiber-optic-coupled dosimeter in high-energy pulsed photon radiation dosimetry.

Fiber-optic-coupled dosimeters (FOCDs) are a new class of in vivo dosimetry systems that are finding increased clinical applications. Utility of FOCDs has been limited in dosimetric applications due Cerenkov-ray signal contamination. The current study reports on the characterization of a novel FOCD, with a gated detection system for the discrimination and effective elimination of the direct contribution of Cerenkov radiation, for use in the radiotherapeutic realm. System reproducibility, linearity and output dependence on dose rate, energy, field size, and temperature response were characterized for 6, 10, and 15MV photon energies. The system exhibited a linear response to absorbed dose ranging from 1 to 2400cGy and showed little dependence to dose rate variations. Overall system reproducibility was 0.52% with no field-geometry and temperature dependence.

Characterization of a fiber-optic-coupled radioluminescent detector for application in the mammography energy range.

Fiber-optic-coupled radioluminescent (FOC) dosimeters are members of a new family of dosimeters that are finding increased clinical applications. This study provides the first characterization of a Cu doped quartz FOC dosimeter at diagnostic energies, specifically across the range of x-ray energies and intensities used in mammographies. We characterize the calibration factors, linearity, angular dependence, and reproducibility of the FOC dosimeters. The sensitive element of each dosimeter was coupled to a photon counting photomultiplier module via 1 m long optical fibers. A computer controlled interface permitted real-time monitoring of the dosimeter output and rapid data acquisition. The axial-angular responses for all dosimeter models show nearly uniform response without any marked decrease in sensitivity. However, the normal-to-axial angular response showed a marked decrease in sensitivity of about 0 degrees C and 180 degrees C. In most clinical applications, appropriate dosimeter positioning can minimize the contributions of the varying normal-to-axial response. The FOC dosimeters having the greatest sensitive length provided the greatest sensitivity, with greatest to lowest sensitivity observed for 4.0, 1.9, 1.6, and 1.1 mm length sensitive elements. The average sensitivity of the dosimeters varies linearly with sensitive volume (R2=95%) and as a function of tube potential and target/filter combinations, generally exhibiting an increased sensitivity for higher energies. The dosimeter sensitivity as a function of tube potential had an average increase of 4.72 +/- 2.04% for dosimeter models and three target-filter combinations tested (Mo/Mo, Mo/Rh, and Rh/Rh) over a range of 25-31 kVp. All dosimeter models exhibited a linear response (R2 > or = 0.997) to exposure for all target-filter combinations, tube potentials, and tube current-time product stations evaluated and demonstrated reproducibility within 2%. All of the dosimeters examined in this study provided a response adequate for the accurate measurement of doses in clinical mammography applications.

Elimination of Cerenkov interference in a fibre-optic-coupled radiation dosemeter.

An optical fibre point dosemeter based on the gated detection of the luminescence from a Cu(1+)-doped fused quartz detector effectively eliminated errors due to Cerenkov radiation and native fibre fluorescence. The gated optical fibre dosemeter overcomes serious problems faced by scintillation and optically stimulated luminescence approaches to optical fibre point dosimetry. The dosemeter was tested using an external beam radiotherapy machine that provided pulses of 6 MV X rays. Gated detection was used to discriminate the signal collected during the radiation pulses, which included contributions from Cerenkov radiation and native fibre fluorescence, from the signal collected between the radiation pulses, which contained only the long-lived luminescence from the Cu(1+)-doped fused quartz detector. Gated detection of the luminescence provided accurate, real-time dose measurements that were linear with absorbed dose, independent of dose rate and that were accurate for all field sizes studied.

Dose mapping of porcine coronary arteries using an optical fiber dosimeter.

BACKGROUND: This study is about the measurement of radiation dose contribution to the coronary arteries during intravascular brachytherapy with beta and gamma emitters utilizing in vivo optical fiber dosimeters. METHODS AND MATERIALS: Domestic pigs were used. With each measurement, catheters were introduced into two different coronary arteries, including the left circumflex (LCX), the left anterior descending (LAD), the first diagonal, and/or the right coronary artery (RCA). A radioactive source (192Ir, 90Sr/Y, or 32P) and the dosimeter were loaded in each of these catheters. Data were collected as the dosimeter was being retracted at a constant rate via computer control. RESULTS: The radiation dose was normalized to 100% at a 2-mm radial distance from the source. When radiating a branching artery, the dose to the bifurcation at 5 mm from the source was 35%, 10%, and 3% for the 192Ir (10 seeds), 90Sr/Y (40 mm), and 32P sources, respectively. When utilizing a 23-seed 192Ir source, the dose is 40% at a 5-mm distance. However, radiation of the RCA did not result in dosing to the LAD or LCX using any source. CONCLUSIONS: The dose to adjacent artery segments is less with beta than with gamma emitters. Significant dose exposition is noted when using gamma emitters at a distance of 5 mm. The results can serve as a guideline for establishing prescription doses and safety margins for the treatment of bifurcation lesions and retreatment of the arteries.

Fused preforms for the fabrication of photonic crystal fibers.

A novel approach for the fabrication of high-quality preforms for use in the fabrication of photonic crystal fibers is described. The preforms are fabricated in a multistep process that involves stacking a bundle with rods and (or) tubes of two dissimilar glasses, fusing the bundle, and then etching the fused bundle in acid to remove one of the two glasses. The procedure for fabrication of the fused preforms is similar to that used in the fabrication of microchannel plate glass and yields periodically spaced, uniform, round channels that extend through the length of the preform.

Gated fiber-optic-coupled detector for in vivo real-time radiation dosimetry.

Gated detection of the output of a fiber-optic-coupled radiation dosimeter effectively eliminated the direct contribution of Cerenkov radiation to the signal. The radiation source was an external beam radiotherapy machine that provided pulses of 6-MeV x rays. Gated detection was used to discriminate the signal collected during the radiation pulses, including Cerenkov interference, from the signal collected between the radiation pulses due only to phosphorescence from the Cu(1+)-doped glass detector. Gated detection of the long-lived phosphorescence of the Cu(1+)-doped glass provided real-time dose measurements that were linear with the absorbed dose and that were accurate for all field sizes studied.