Methylation Patterns of the FKBP5 Gene in Association with Childhood Maltreatment and Depressive Disorders.

Childhood maltreatment is an important risk factor for adult depression and has been associated with changes in the hypothalamic pituitary adrenal (HPA) axis, including cortisol secretion and methylation of the FKBP5 gene. Furthermore, associations between depression and HPA changes have been reported. This study investigated the associations of whole-blood FKBP5 mRNA levels, serum cortisol levels, childhood maltreatment, and depressive symptoms with the whole-blood methylation status (assessed via target bisulfite sequencing) of 105 CpGs at the FKBP5 locus using data from the general population-based Study of Health in Pomerania (SHIP) (N = 203). Both direct and interaction effects with the rs1360780 single-nucleotide polymorphism were investigated. Nominally significant associations of main effects on methylation of a single CpG site were observed at intron 3, intron 7, and the 3'-end of the gene. Additionally, methylation at two clusters at the 3'-end and intron 7 were nominally associated with childhood maltreatment × rs1360780 and depressive symptoms × rs1360780, respectively. The results add to the understanding of molecular mechanisms underlying the emergence of depression and could aid the development of personalised depression therapy and drug development.

Superconducting transition edge bolometer for high-flux neutron detection.

Needs for neutron detection and monitoring in high neutron flux environments are increasing in several different fields. A completely solid-state, current mode bolometric detector is constructed as a solid substrate transition edge sensor based on a high-T[Formula: see text] superconducting meander. The detector consists of four individual pixels of which three pixels include [Formula: see text] neutron absorption layers. The absorbed energy per neutron absorption reaction is modelled and compared to experimental data. The response of the tested detector is directly correlated to a cold neutron beam with a flux of [Formula: see text] modulated by a slit. The signal is found to be an order of magnitude higher than the thermal background. The dynamics described by the temporal saturation constants is governed by a modulation frequency less than [Formula: see text]. The thermal response is dynamic and never fully saturates for [Formula: see text] exposures. The efficiency for this proof-of-principle design is 1-2%. Possibilities for optimization are identified, that will increase the efficiency to become comparable to existing solid boron-10 detectors. The existing detectors with event-based read-out have limited functionality in high flux environments. The superconducting bolometer described in this work using current-mode readout will pave the way for high flux applications.

Detrimental Effects of ApoE ε4 on Blood-Brain Barrier Integrity and Their Potential Implications on the Pathogenesis of Alzheimer's Disease.

Alzheimer's disease (AD) is a progressive neurodegenerative disease representing the most common type of dementia in older adults. The major risk factors include increased age, genetic predisposition and socioeconomic factors. Among the genetic factors, the apolipoprotein E (ApoE) ε4 allele poses the greatest risk. Growing evidence suggests that cerebrovascular dysfunctions, including blood-brain barrier (BBB) leakage, are also linked to AD pathology. Within the scope of this paper, we, therefore, look upon the relationship between ApoE, BBB integrity and AD. In doing so, both brain-derived and peripheral ApoE will be considered. Despite the considerable evidence for the involvement of brain-derived ApoE ε4 in AD, information about the effect of peripheral ApoE ε4 on the central nervous system is scarce. However, a recent study demonstrated that peripheral ApoE ε4 might be sufficient to impair brain functions and aggravate amyloid-beta pathogenesis independent from brain-based ApoE ε4 expression. Building upon recent literature, we provide an insight into the latest research that has enhanced the understanding of how ApoE ε4, secreted either in the brain or the periphery, influences BBB integrity and consequently affects AD pathogenesis. Subsequently, we propose a pathway model based on current literature and discuss future research perspectives.

Correlative study of liquid in human bone by 3D neutron microscopy and lab-based X-ray µCT.

Liquid plays an important role in bone that has a complex 3D hierarchical pore structure. However, liquid (water) is difficult to discern from e.g. an organic matrix by X-ray imaging. Therefore, we use a correlative approach using both high resolution X-ray and neutron imaging. Human femoral bone with liquid adsorbed into some of the pores was imaged with both the Neutron Microscope at the ICON beamline, SINQ at PSI, and by lab-based µCT using 2.7 µm voxel size. Segmentation of the two datasets showed that, even though the liquid was clearly distinguishable in the neutron data and not in the X-ray data, it remained challenging to segment it from bone due to overlaps of peaks in the gray level histograms. In consequence, segmentations from X-ray and neutron data varied significantly. To address this issue, the segmented X-ray porosities was overlaid on the neutron data, making it possible to localize the liquid in the vascular porosities of the bone sample and use the neutron attenuation to identify it as H2O. The contrast in the neutron images was lowered slightly between the bone and the liquid compared to the bone and the air. This correlative study shows that the complementary use of X-rays and neutrons is very favorable, since H2O is very distinct in the neutron data, while D2O, H2O, and organic matter can barely be distinguished from air in the X-ray data.

Polychromatic neutron phase-contrast imaging of weakly absorbing samples enabled by phase retrieval.

The use of a phase-retrieval technique for propagation-based phase-contrast neutron imaging with a polychromatic beam is demonstrated. This enables imaging of samples with low absorption contrast and/or improving the signal-to-noise ratio to facilitate e.g. time-resolved measurements. A metal sample, designed to be close to a phase pure object, and a bone sample with canals partially filled with D2O were used for demonstrating the technique. These samples were imaged with a polychromatic neutron beam followed by phase retrieval. For both samples the signal-to-noise ratios were significantly improved and, in the case of the bone sample, the phase retrieval allowed for separation of bone and D2O, which is important for example for in situ flow experiments. The use of deuteration contrast avoids the use of chemical contrast enhancement and makes neutron imaging an interesting complementary method to X-ray imaging of bone.

Surfactant-Free Colloidal Syntheses of Gold-Based Nanomaterials in Alkaline Water and Mono-alcohol Mixtures.

Gold nanoparticles (Au NPs) and gold-based nanomaterials combine unique properties relevant for medicine, imaging, optics, sensing, catalysis, and energy conversion. While the Turkevich-Frens and Brust-Schiffrin methods remain the state-of-the-art colloidal syntheses of Au NPs, there is a need for more sustainable and tractable synthetic strategies leading to new model systems. In particular, stabilizers are almost systematically used in colloidal syntheses, but they can be detrimental for fundamental and applied studies. Here, a surfactant-free synthesis of size-controlled colloidal Au NPs stable for months is achieved by the simple reduction of HAuCl4 at room temperature in alkaline solutions of low-viscosity mono-alcohols such as ethanol or methanol and water, without the need for any other additives. Palladium (Pd) and bimetallic Au x Pd y NPs, nanocomposites and multimetallic samples, are also obtained and are readily active (electro)catalysts. The multiple benefits over the state-of-the-art syntheses that this simple synthesis bears for fundamental and applied research are highlighted.

Chemical Insights into the Formation of Colloidal Iridium Nanoparticles from In Situ X-ray Total Scattering: Influence of Precursors and Cations on the Reaction Pathway.

Iridium nanoparticles are important catalysts for several chemical and energy conversion reactions. Studies of iridium nanoparticles have also been a key for the development of kinetic models of nanomaterial formation. However, compared to other metals such as gold or platinum, knowledge on the nature of prenucleation species and structural insights into the resultant nanoparticles are missing, especially for nanoparticles obtained from IrxCly precursors investigated here. We use in situ X-ray total scattering (TS) experiments with pair distribution function (PDF) analysis to study a simple, surfactant-free synthesis of colloidal iridium nanoparticles. The reaction is performed in methanol at 50 °C with only a base and an iridium salt as precursor. From different precursor salts─IrCl3, IrCl4, H2IrCl6, or Na2IrCl6─colloidal nanoparticles as small as Ir∼55 are obtained as the final product. The nanoparticles do not show the bulk iridium face-centered cubic (fcc) structure but show decahedral and icosahedral structures. The formation route is highly dependent on the precursor salt used. Using IrCl3 or IrCl4, metallic iridium nanoparticles form rapidly from IrxClyn- complexes, whereas using H2IrCl6 or Na2IrCl6, the iridium nanoparticle formation follows a sudden growth after an induction period and the brief appearance of a crystalline phase. With H2IrCl6, the formation of different Irn (n = 55, 55, 85, and 116) nanoparticles depends on the nature of the cation in the base (LiOH, NaOH, KOH, or CsOH, respectively) and larger particles are obtained with larger cations. As the particles grow, the nanoparticle structure changes from partly icosahedral to decahedral. The results show that the synthesis of iridium nanoparticles from IrxCly is a valuable iridium nanoparticle model system, which can provide new compositional and structural insights into iridium nanoparticle formation and growth.

The relationship between Alzheimer's-related brain atrophy patterns and sleep macro-architecture.

Introduction: Sleep is increasingly recognized as a major risk factor for neurodegenerative disorders such as Alzheimer's disease (AD). Methods: Using an magnetic resonance imaging (MRI)-based AD score based on clinical data from the Alzheimer's Disease Neuroimaging Initiative 1 (ADNI1) case-control cohort, we investigated the associations between polysomnography-based sleep macro-architecture and AD-related brain atrophy patterns in 712 pre-symptomatic, healthy subjects from the population-based Study of Health in Pomerania. Results: We identified a robust inverse association between slow-wave sleep and the AD marker (estimate: -0.019; 95% confidence interval: -0.03 to -0.0076; false discovery rate [FDR] = 0.0041), as well as with gray matter (GM) thicknesses in typical individual cortical AD-signature regions. No effects were identified regarding rapid eye movement or non-rapid eye movement (NREM) stage 2 sleep, and NREM stage 1 was positively associated with GM thickness, mainly in the prefrontal cortical regions. Discussion: There is a cross-sectional relationship between AD-related neurodegenerative patterns and the proportion of sleep spent in slow-wave sleep.

Tem-per-ature dependence in Bragg edge neutron transmission measurements.

A systematic study has been carried out to investigate the neutron transmission signal as a function of sample tem-per-ature. In particular, the experimentally de-ter-mined wavelength-dependent neutron attenuation spectra for a martensitic steel at tem-per-atures ranging from 21 to 700°C are com-pared with simulated data. A theoretical description that includes the Debye-Waller factor in order to describe the tem-per-ature influence on the neutron cross sections was im-plemented in the nxsPlotter software and used for the simulations. The analysis of the attenuation coefficients at varying tem-per-atures shows that the missing contributions due to elastic and inelastic scattering can be clearly distinguished: while the elastically scattered intensities decrease with higher tem-per-atures, the inelastically scattered intensities increase, and the two can be separated from each other by analysing unique sharp features in the form of Bragg edges. This study presents the first systematic approach to qu-antify this effect and can serve as a basis , for example, to correct measurements taken during in situ heat treatments, in many cases being a prerequisite for obtaining qu-anti-fiable results.

Surfactant-free syntheses and pair distribution function analysis of osmium nanoparticles.

A surfactant-free synthesis of precious metal nanoparticles (NPs) performed in alkaline low-boiling-point solvents has been recently reported. Monoalcohols are here investigated as solvents and reducing agents to obtain colloidal Os nanoparticles by using low-temperature (<100 °C) surfactant-free syntheses. The effect of the precursor (OsCl3 or H2OsCl6), precursor concentration (up to 100 mM), solvent (methanol or ethanol), presence or absence of a base (NaOH), and addition of water (0 to 100 vol %) on the resulting nanomaterials is discussed. It is found that no base is required to obtain Os nanoparticles as opposed to the case of Pt or Ir NPs. The robustness of the synthesis for a precursor concentration up to 100 mM allows for the performance of X-ray total scattering with pair distribution function (PDF) analysis, which shows that 1-2 nm hexagonal close packed (hcp) NPs are formed from chain-like [OsO x Cl y ] complexes.

In situ Grazing Incidence Small Angle X-ray Scattering on Roll-To-Roll Coating of Organic Solar Cells with Laboratory X-ray Instrumentation.

We present an in-house, in situ Grazing Incidence Small Angle X-ray Scattering (GISAXS) experiment, developed to probe the drying kinetics of roll-to-roll slot-die coating of the active layer in organic photovoltaics (OPVs), during deposition. For this demonstration, the focus is on the combination of P3HT:O-IDTBR and P3HT:EH-IDTBR, which have different drying kinetics and device performance, despite their chemical structure only varying slightly by the sidechain of the small molecule acceptor. This article provides a step-by-step guide to perform an in situ GISAXS experiment and demonstrates how to analyze and interpret the results. Usually, performing this type of in situ X-ray experiments to investigate the drying kinetics of the active layer in OPVs relies on access to synchrotrons. However, by using and further developing the method described in this paper, it is possible to perform experiments with a coarse temporal and spatial resolution, on a day-to-day basis to gain fundamental insight in the morphology of drying inks.

Solvent-Dependent Growth and Stabilization Mechanisms of Surfactant-Free Colloidal Pt Nanoparticles.

Understanding the formation of nanoparticles (NPs) is key to develop materials by sustainable routes. The Co4CatTM process is a new synthesis of precious metal NPs in alkaline mono-alcohols well-suited to develop active nanocatalysts. The synthesis is 'facile', surfactant-free and performed under mild conditions like low temperature. The reducing properties of the solvent are here shown to strongly influence the formation of Pt NPs. Based on the in situ formation of CO adsorbed on the NP surface by solvent oxidation, a model is proposed that accounts for the different growth and stabilization mechanisms as well as re-dispersion properties of the surfactant-free NPs in different solvents. Using in situ and ex situ characterizations, it is established that in methanol, a slow nucleation with a limited NP growth is achieved. In ethanol, a fast nucleation followed by continuous and pronounced particle sintering occurs.

Methods for Calibration of Specimen Temperature During In Situ Transmission Electron Microscopy Experiments.

One of the biggest challenges for in situ heating transmission electron microscopy (TEM) and scanning transmission electron microscopy (STEM) is the ability to measure the local temperature of the specimen accurately. Despite technological improvements in the construction of TEM/STEM heating holders, the problem of being able to measure the real sample temperature is still the subject of considerable discussion. In this study, we review the present literature on methodologies for temperature calibration. We analyze calibration methods that require the use of a thermometric material in addition to the specimen under study, as well as methods that can be performed directly on the specimen of interest without the need for a previous calibration. Finally, an overview of the most important characteristics of all the treated techniques, including temperature ranges and uncertainties, is provided in order to provide an accessory database to consult before an in situ TEM/STEM temperature calibration experiment.

UV-induced syntheses of surfactant-free precious metal nanoparticles in alkaline methanol and ethanol.

Surfactant-free UV-induced syntheses of Pt and Ir nanoparticles in alkaline methanol and ethanol are presented. Small size nanoparticles ca. 2 nm in diameter are obtained without surfactants in a wide range of base concentration.

Controlled Synthesis of Surfactant-Free Water-Dispersible Colloidal Platinum Nanoparticles by the Co4Cat Process.

The recently reported Co4Cat process is a synthesis method bearing ecological and economic benefits to prepare precious-metal nanoparticles (NPs) with optimized catalytic properties. In the Co4Cat process, a metal precursor (e.g., H2 PtCl6 ) is dissolved in an alkaline solution of a low-boiling-point solvent (methanol) and reduced to NPs at low temperature (<80 °C) without the use of surfactants. Here, the Co4Cat process to prepare Pt NPs is described in detail. The advantages of this new synthesis method for research and development but also industrial production are highlighted in a comparison with the popular "polyol" synthesis. The reduction of H2 PtCl6 from PtIV to PtII and further to Pt0 is followed by UV/Vis and XANES/EXAFS measurements. It is demonstrated how the synthesis can be accelerated, how size control is achieved, and how the colloidal dispersions can be stabilized without the use of surfactants. Despite being surfactant-free, the Pt NPs exhibit surprisingly long-term (up to 16 months) stability in water over a wide pH range (4-12) and in aqueous buffer solutions. The Co4Cat process is thus relevant to produce NPs for heterogeneous catalysis, electro-catalysis, or bio/medical applications.

Colloids for Catalysts: A Concept for the Preparation of Superior Catalysts of Industrial Relevance.

Compared to conventional preparation methods for supported heterogeneous catalysts, the use of colloidal nanoparticles (NPs) allows for a precise control over size, size distribution, and distribution/location of the NPs on the support. However, common colloidal syntheses have restrictions that limit their applicability for industrial catalyst preparation. We present a simple, surfactant-free, and scalable preparation method for colloidal NPs to overcome these restrictions. We demonstrate how precious-metal NPs are prepared in alkaline methanol, how the particle size can be tuned, and how supported catalysts are obtained. The potential of these colloids in the preparation of improved catalysts is demonstrated by two examples from heterogeneous catalysis and electrocatalysis.

Three Dimensional Polarimetric Neutron Tomography of Magnetic Fields.

Through the use of Time-of-Flight Three Dimensional Polarimetric Neutron Tomography (ToF 3DPNT) we have for the first time successfully demonstrated a technique capable of measuring and reconstructing three dimensional magnetic field strengths and directions unobtrusively and non-destructively with the potential to probe the interior of bulk samples which is not amenable otherwise. Using a pioneering polarimetric set-up for ToF neutron instrumentation in combination with a newly developed tailored reconstruction algorithm, the magnetic field generated by a current carrying solenoid has been measured and reconstructed, thereby providing the proof-of-principle of a technique able to reveal hitherto unobtainable information on the magnetic fields in the bulk of materials and devices, due to a high degree of penetration into many materials, including metals, and the sensitivity of neutron polarisation to magnetic fields. The technique puts the potential of the ToF time structure of pulsed neutron sources to full use in order to optimise the recorded information quality and reduce measurement time.

Size effect studies in catalysis: a simple surfactant-free synthesis of sub 3 nm Pd nanocatalysts supported on carbon.

Supported Pd nanoparticles are prepared under ambient conditions via a surfactant-free synthesis. Pd(NO3)2 is reduced in the presence of a carbon support in alkaline methanol to obtain sub 3 nm nanoparticles. The preparation method is relevant to the study of size effects in catalytic reactions like ethanol electro-oxidation.

Flexible sample environment for high resolution neutron imaging at high temperatures in controlled atmosphere.

High material penetration by neutrons allows for experiments using sophisticated sample environments providing complex conditions. Thus, neutron imaging holds potential for performing in situ nondestructive measurements on large samples or even full technological systems, which are not possible with any other technique. This paper presents a new sample environment for in situ high resolution neutron imaging experiments at temperatures from room temperature up to 1100 °C and/or using controllable flow of reactive atmospheres. The design also offers the possibility to directly combine imaging with diffraction measurements. Design, special features, and specification of the furnace are described. In addition, examples of experiments successfully performed at various neutron facilities with the furnace, as well as examples of possible applications are presented. This covers a broad field of research from fundamental to technological investigations of various types of materials and components.

Direct writing on graphene 'paper' by manipulating electrons as 'invisible ink'.

The combination of self-assembly (bottom up) and nano-imprint lithography (top down) is an efficient and effective way to record information at the nanoscale by writing. The use of an electron beam for writing is quite a promising strategy; however, the 'paper' on which to save the information is not yet fully realized. Herein, graphene was selected as the thinnest paper for recording information at the nanoscale. In a transmission electron microscope, in situ high precision writing and drawing were achieved on graphene nanosheets by manipulating electrons with a 1 nm probe (probe current ~2 × 10(-9) A m(-2)) in scanning transmission electron microscopy (STEM) mode. Under electron probe irradiation, the carbon atom tends to displace within a crystalline specimen, and dangling bonds are formed from the original sp(2) bonding after local carbon atoms have been kicked off. The absorbed random foreign amorphous carbon assembles along the line of the scanning direction induced by secondary electrons and is immobilized near the edge. With the ultralow secondary electron yield of the graphene, additional foreign atoms determining the accuracy of the pattern have been greatly reduced near the targeting region. Therefore, the electron probe in STEM mode serves as invisible ink for nanoscale writing and drawing. These results not only shed new light on the application of graphene by the interaction of different forms of carbon, but also illuminate the interaction of different carbon forms through electron beams.