Agaricus bisporus compost improves the potential of Salix purpurea × viminalis hybrid for copper accumulation.

The aim of the study was to determine the ability of spent mushroom compost (SMC) from the production of Agaricus bisporus (A. bisporus) to stimulate the growth and efficiency of copper (Cu) accumulation by Salix purpurea × viminalis hybrid. Roots, shoots and leaves were analysed in terms of total Cu content and selected biometric parameters. Due to the absence of information regarding the physiological response of the studied plant, low molecular weight organic acids (LMWOAs), phenolic compounds and salicylic acid (SA) contents were investigated. The obtained results clearly demonstrate the effectiveness (usefulness) of SMC in promoting the growth and stimulation of Cu accumulation by the studied Salix taxon. The highest Cu content in roots and shoots was found at the 10% SMC addition (507±22 and 380±11 mg kg(-1) DW, respectively), while there was a reduction of the content in leaves and young shoots (109±8 and 124±7 mg kg(-1) DW, respectively). In terms of physiological response, lowered secretion of LMWOAs, biosynthesis of phenolic compounds and SA, as well as accumulation of soluble sugars in Salix leaves was observed with SMC addition. Simultaneously, an elevation of the total phenolic content in leaves of plants cultivated with SMC was observed, considered as antioxidant biomolecules.

Pharmacokinetics and pharmacodynamics of ciprofloxacin in critically ill patients after the first intravenous administration of 400 mg.

PURPOSE: To investigate the pharmacokinetics and pharmacodynamics of ciprofloxacin in critically ill patients after the first intravenous administration of 400 mg. MATERIAL/METHODS: Plasma concentrations were measured in 20 critically ill patients (mean [SD]; age, 55.5 [16.5] years; weight, 80.3 [16.9] kg; and creatinine clearance, 110.0 [71.5] mL/min). Four blood samples were drawn at the following time points 0, 0.5, 6 , 8 hours after infusion. Ciprofloxacin concentrations were determined by high-performance liquid chromatography. RESULTS: In the cases where ciprofloxacin was applied in targeted antibiotic therapy the minimum inhibitory concentrations (MIC) were ≤0.5 mg/l. The maximum and minimum plasma concentrations of ciprofloxacin were 1.74 (0.58-7.90) and 0.45 (0.16-2.96) mg/l, respectively. The main pharmacokinetic parameters for ciprofloxacin in the analyzed patients were as follows: k(el), 0.21 h-1; t(1/2kel), 3.37 h; AUC(0-inf), 10.10 mg×h/l; AUMC(0-last), 15.36 mg×h(2)/l; MRT, 1.71 h; V(d), 214.8 l; Cl, 39.70 l/h. Considering the maximum value of MIC (0.5 mg/l) only 30% and 25% of analyzed patients had desired values of the PK/PD indexes AUIC>125 and C(max) /MIC>10, respectively. CONCLUSIONS: The target plasma concentrations after the first dose of ciprofloxacin were reached only in a few critically ill patients. Considerable inter-subject variability for PK/PD parameters in ICU patients requires systematic monitoring.

Influence of Ca/Mg ratio on phytoextraction properties of Salix viminalis. II. Secretion of low molecular weight organic acids to the rhizosphere.

A hydroponic experiment in a phytotron was performed to investigate the effect of two different Ca/Mg ratios (4:1 and 1:10) and trace element ions (Cd, Cu, Pb and Zn) in solution on the efficiency of low molecular weight organic acid (LMWOA) formation in Salix viminalis rhizosphere. Depending on the Ca/Mg ratio and presence of selected trace elements at 0.5mM concentration, the amount and kind of LMWOAs in the rhizosphere were significantly affected. In physiological 4:1 Ca/Mg ratio the following complex of acids was observed: malonic (Pb, Zn), citric, lactic, maleic and succinic (Zn) acids. Under 1:10 Ca/Mg ratio, citric (Cd, Zn), maleic and succinic (Cd, Cu, Pb, Zn) acids were seen. Additionally, high accumulation of zinc and copper in all systems was observed, with the exception of those where one of the metals was at higher concentration. Summing up, the results indicate a significant role of LMWOAs in Salix phytoremediation abilities. Both effects can be modulated depending on the mutual Ca/Mg ratio.

Cadmium and lead uptake by Salix viminalis under modified Ca/Mg ratio.

The studies were focused on the influence of mutual changes in the ratio of calcium and magnesium in soil on the efficiency of cadmium and lead uptake and accumulation by Salix viminalis. In the environmental experiment the soil was modified according to the natural Ca/Mg ratio with the experimental groups 4:1 (physiological ratio), 20:1, and 1:10, and was characterized by the amounts of the most important elements (including heavy metals) and selected soil parameters. Efficiency of lead and cadmium accumulation was in the order of Ca/Mg ratios 1:10 > 4:1 > 20:1, and was higher in the shoots at 0.5 m height when compared to 0.1 m above the ground. Under Cd and Pb supplementation the level of both metals was 2-fold higher, while bioaccumulation factor values according to selected literature indicated weak accumulation. When the seasonal metal uptake was analysed (from April to October), the highest accumulation efficiency was observed in the first two periods (April to August) and was Ca/Mg ratio independent. Salix growth was restrained under 1:10 Ca/Mg ratio while it was stimulated under 20:1 ratio, which was opposite to the metal sorption. Summing up, increased calcium level in soil (20:1 Ca/Mg) resulted in limited sorption of heavy metals and stimulated biomass productivity. Under increased magnesium concentration (1:10 Ca/Mg) in relation to the natural 4:1 ratio the accumulation efficiency was the greatest but plant growth was inhibited.

Analyzing multi-environment variety trials using randomization-derived mixed models.

Of interest is the analysis of results of a series of experiments repeated at several environments with the same set of plant varieties. Suppose that the experiments, multi-environment variety trials, are all conducted in resolvable incomplete block (IB) designs. Following the randomization approach adopted in Calinski and Kageyama (2000, Lecture Notes in Statistics, 150), two models for analyzing such trial data can be considered. One is derived under a complete additivity assumption, the other takes into account possible different responses of the varieties to variable environmental conditions. The analysis under the first, the standard model, does not provide answers to questions related to the performance of the individual varieties at different environments. These can be considered when using the more general second model. The purpose of this article is to devise interesting parameter estimation and hypothesis testing procedures under that more realistic model. Its application is illustrated by a thorough analysis of a set of data from a winter wheat series of trials.

Moniliformin accumulation in kernels of oats used for food and feed purposes.

Inoculation experiments with 12 genotypes of oats (9 lines: CHD 894, CHD 1095, CHD 1296, CHD 1607, CHD 1653, CHD 1692, STH 2293, STH 2393, STH 2494, STH 2694 and 2 cultivars: Farys, Slawko) were performed during the vegetation seasons of 1999 - 2000 in Zamosc region in the South - Eastern part of Poland.Panicles of oats were inoculated with a conidial suspension ofFusarium avenaceum, which caused the following average reductions of traits: yield by 37.8 % and weight of 1000 kernels by 40.2 % respectively.The highest susceptibility to scab development caused by theF. avenaceum inoculation was found particularly for two lines (CHD 894, and CHD 1296) while cultivar Farys and line CHD 1607 exhibited the highest resistance to the disease in terms of TKW and yield reductions after inoculation. During 2 consecutive years (1999 and 2000 respectively) the average level of moniliformin accumulation (mg/kg) in positive samples was respectively 0.51 and 0.12 the highest being 1.11 and 0.26, while the lowest was 0.30 and 0.01.

A multivariate approach to the problem of QTL localization.

QTL mapping with statistical likelihood-based procedures or asymptotically equivalent regression methods is usually carried out in a univariate way, even if many traits were observed in the experiment. Some proposals for multivariate QTL mapping by an extension of the maximum likelihood method for mixture models or by an application of the canonical transformation have been given in the literature. This paper describes a method of analysis of multitrait data sets, aimed at localization of QTLs contributing to many traits simultaneously, which is based on the linear model of multivariate multiple regression. A special form of the canonical analysis is employed to decompose the test statistic for the general no-QTL hypothesis into components pertaining to individual traits and individual, putative QTLs. Extended linear hypotheses are used to formulate conjectures concerning pleiotropy. A practical mapping algorithm is described. The theory is illustrated with the analysis of data from a study of maize drought resistance.

Genetic determination of variability of barley doubled haploids inoculated with Fusarium culmorum (W.G.Sm.) Sacc. with regard to mycotoxin accumulation and reduction in yield traits.

The genetic determination of variability of barley doubled haploid (DH) lines in regard of their susceptibility to Fusarium head blight caused by Fusarium culmorum was studied. The susceptibility was evaluated in 3-year field experiment on the basis of reduction in yield traits and myotoxin accumulation in infected kernels. The following traits were analysed in inoculated and control plants: kernel number and weight per ear, 1000-kernel weight, percentage of plump kernels (>2.5 mm), deoxynivalenol (DON) content and nivalenol (NIV) content of kernels. On the basis of the obtained data, heritability coefficient (ratio of genotypic to phenotypic variance) was assessed, and genetic parameters as well as the number of effective factors were estimated. Heritability coefficients calculated from two-way analysis of variance, i.e.regarding the influence of years and year x genotype interaction, appeared to be exceptionally low and ranged from 5.2% for the reduction in plump kernels to 38.2% for the reduction in 1000-kernel weight. In the case of mycotoxin accumulation about 60% of the observed variability in NIV concentrations and 30% in DON concentration resulted form genetic differences among lines. Additive effects of genes were important for all the analysed traits. Significant effects of dominance and dominance x dominance were observed for 1000-kernel weight and percentage of plump kernels. Moreover, it was found that the observed variability in yield trait reduction resulted from segregation of 5-6 effective factors, DON contents from 4 factors, while NIV content from 5 factors.

Genetic distances based on quantitative traits.

Morphological data showing continuous distributions, polygenically controlled, may be particularly useful in intergroup classification below the species level; an appropriate distance analysis based on these traits is an important tool in evolutionary biology and in plant and animal breeding.--The interpretation of morphological distances in genetic terms is not easy because simple phenotypic data may lead to biased estimates of genetic distances. Convenient estimates can be obtained whenever it is possible to breed populations according to a suitable crossing design and to derive information from genetic parameters.--A general method for determining genetic distances is proposed. The procedure of multivariate analysis of variance is extended to estimate appropriate genetic parameters (genetic effects). Not only are optimal statistical estimates of parameters obtained but also the procedure allows the measurement of genetic distances between populations as linear functions of the estimated parameters, providing an appropriate distance matrix that can be defined in terms of these parameters. The use of the T2 statistic, defined in terms of the vector of contrasts specifying the distance, permits the testing of the significance of any distance between any pair of populations that may be of interest from a genetic point of view.--A numerical example from maize diallel data is reported in order to illustrate the procedure. In particular, heterosis effects are used as the basis for estimates of genetic divergence between populations.