Room-temperature magnetoresistance in Ni78Fe22/C8-BTBT/Ni78Fe22 nanojunctions fabricated from magnetic thin-film edges using a novel technique.

Molecular spintronic devices are gaining popularity because the organic semiconductors with long spin relaxation times are expected to have long spin diffusion lengths. A typical molecular spintronic device consists of organic molecules sandwiched between two magnetic layers, which exhibits magnetoresistance (MR) effect. Nanosized devices are also expected to have a high spin polarization, leading to a large MR effect owing to effective orbital hybridization. However, most studies on nanosized molecular spintronic devices have investigated the MR effect at low temperatures because of the difficulty in observing the MR effect at room temperature. Here we focus on high-mobility molecules expected to show long spin diffusion lengths, which lead to the observation of the MR effect in nanoscale junctions at room temperature. In this study, we fabricate magnetic nanojunctions consisting of high-mobility molecules, 2,7-dioctyl[1]benzothieno[3,2-b][1]benzothiophene (C8-BTBT), sandwiched between two Ni78Fe22 thin films with crossed edges. Transmission electron microscopy (TEM) images reveal that C8-BTBT molecular layers with smooth and clear interfaces can be deposited on the Ni78Fe22 thin-film edges. Consequently, we observe a clear positive MR effect, that is, R P < R AP, where R P and R AP are the resistances in the parallel (P) and antiparallel (AP) configurations, respectively, of two magnetic electrodes in the Ni78Fe22/C8-BTBT/Ni78Fe22 nanojunctions at room temperature. The obtained results indicate that the spin signal through the C8-BTBT molecules can be successfully observed. The study presented herein provides a novel nanofabrication technique and opens up new opportunities for research in high-mobility molecular nano-spintronics.

Large magnetocapacitance beyond 420% in epitaxial magnetic tunnel junctions with an MgAl2O4 barrier.

Magnetocapacitance (MC) effect has been observed in systems where both symmetries of time-reversal and space-inversion are broken, for examples, in multiferroic materials and spintronic devices. The effect has received increasing attention due to its interesting physics and the prospect of applications. Recently, a large tunnel magnetocapacitance (TMC) of 332% at room temperature was reported using MgO-based (001)-textured magnetic tunnel junctions (MTJs). Here, we report further enhancement in TMC beyond 420% at room temperature using epitaxial MTJs with an MgAl2O4(001) barrier with a cation-disordered spinel structure. This large TMC is partially caused by the high effective tunneling spin polarization, resulted from the excellent lattice matching between the Fe electrodes and the MgAl2O4 barrier. The epitaxial nature of this MTJ system sports an enhanced spin-dependent coherent tunneling effect. Among other factors leading to the large TMC are the appearance of the spin capacitance, the large barrier height, and the suppression of spin flipping through the MgAl2O4 barrier. We explain the observed TMC by the Debye-Fröhlich modelled calculation incorporating Zhang-sigmoid formula, parabolic barrier approximation, and spin-dependent drift diffusion model. Furthermore, we predict a 1000% TMC in MTJs with a spin polarization of 0.8. These experimental and theoretical findings provide a deeper understanding on the intrinsic mechanism of the TMC effect. New applications based on large TMC may become possible in spintronics, such as multi-value memories, spin logic devices, magnetic sensors, and neuromorphic computing.

Observation and theoretical calculations of voltage-induced large magnetocapacitance beyond 330% in MgO-based magnetic tunnel junctions.

Magnetic tunnel junctions (MTJs) in the field of spintronics have received enormous attention owing to their fascinating spin phenomena for fundamental physics and potential applications. MTJs exhibit a large tunnel magnetoresistance (TMR) at room temperature. However, TMR depends strongly on the bias voltage, which reduces the magnitude of TMR. On the other hand, tunnel magnetocapacitance (TMC), which has also been observed in MTJs, can be increased when subjecting to a biasing voltage, thus exhibiting one of the most interesting spin phenomena. Here we report a large voltage-induced TMC beyond 330% in MgO-based MTJs, which is the largest value ever reported for MTJs. The voltage dependence and frequency characteristics of TMC can be explained by the newly proposed Debye-Fröhlich model using Zhang-sigmoid theory, parabolic barrier approximation, and spin-dependent drift diffusion model. Moreover, we predict that the voltage-induced TMC ratio could reach over 3000% in MTJs. It is a reality now that MTJs can be used as capacitors that are small in size, broadly ranged in frequencies and controllable by a voltage. Our theoretical and experimental findings provide a deeper understanding on the exact mechanism of voltage-induced AC spin transports in spintronic devices. Our research may open new avenues to the development of spintronics applications, such as highly sensitive magnetic sensors, high performance non-volatile memories, multi-functional spin logic devices, voltage controlled electronic components, and energy storage devices.

Enhancement of coercivity of self-assembled stacking of ferrimagnetic and antiferromagnetic nanocubes.

The coercivity of magnetic nanoparticles is enhanced by the exchange coupling effect at the interface of ferrimagnetic and antiferromagnetic self-assembled monolayers. Antiferromagnetic Co3O4 nanocubes were regularly stacked on an ordered monolayer of ferrimagnetic Fe3O4 nanocubes by layer-by-layer manipulation using evaporation-driven self-assembly. The ordered arrangements of the ferrimagnetic and antiferromagnetic nanocubes are effective for the enhancement of the ferromagnetic character.

Robustness of Voltage-induced Magnetocapacitance.

One of the most important achievements in the field of spintronics is the development of magnetic tunnel junctions (MTJs). MTJs exhibit a large tunneling magnetoresistance (TMR). However, TMR is strongly dependent on biasing voltage, generally, decreasing with applying bias. The rapid decay of TMR was a major deficiency of MTJs. Here we report a new phenomenon at room temperature, in which the tunneling magnetocapacitance (TMC) increases with biasing voltage in an MTJ system based on Co40Fe40B20/MgO/Co40Fe40B20. We have observed a maximum TMC value of 102% under appropriate biasing, which is the largest voltage-induced TMC effect ever reported for MTJs. We have found excellent agreement between theory and experiment for the bipolar biasing regions using Debye-Fröhlich model combined with quartic barrier approximation and spin-dependent drift-diffusion model. Based on our calculation, we predict that the voltage-induced TMC ratio could reach 1100% in MTJs with a corresponding TMR value of 604%. Our work has provided a new understanding on the voltage-induced AC spin-dependent transport in MTJs. The results reported here may open a novel pathway for spintronics applications, e.g., non-volatile memories and spin logic circuits.

Proton-Driven Intercalation and Ion Substitution Utilizing Solid-State Electrochemical Reaction.

The development of an unconventional synthesis method has a large potential to drastically advance materials science. In this research, a new synthesis method based on a solid-state electrochemical reaction was demonstrated, which can be made available for intercalation and ion substitution. It was referred to as proton-driven ion introduction (PDII). The protons generated by the electrolytic dissociation of hydrogen drive other monovalent cations along a high electric field in the solid state. Utilizing this mechanism, Li+, Na+, K+, Cu+, and Ag+ were intercalated into a layered TaS2 single crystal while maintaining high crystallinity. This liquid-free process of ion introduction allows the application of high voltage around several kilovolts to the sample. Such a high electric field strongly accelerates ion substitution. Actually, compared to conventional solid-state reaction, PDII introduced 15 times the amount of K into Na super ionic conductor (NASICON)-structured Na3-xKxV2(PO4)3. The obtained materials exhibited a thermodynamically metastable phase, which has not been reported so far. This concept and idea for ion introduction is expected to form new functional compounds and/or phases.

Inverse Tunnel Magnetocapacitance in Fe/Al-oxide/Fe3O4.

Magnetocapacitance (MC) effect, observed in a wide range of materials and devices, such as multiferroic materials and spintronic devices, has received considerable attention due to its interesting physical properties and practical applications. A normal MC effect exhibits a higher capacitance when spins in the electrodes are parallel to each other and a lower capacitance when spins are antiparallel. Here we report an inverse tunnel magnetocapacitance (TMC) effect for the first time in Fe/AlOx/Fe3O4 magnetic tunnel junctions (MTJs). The inverse TMC reaches up to 11.4% at room temperature and the robustness of spin polarization is revealed in the bias dependence of the inverse TMC. Excellent agreement between theory and experiment is achieved for the entire applied frequency range and the wide bipolar bias regions using Debye-Fröhlich model (combined with the Zhang formula and parabolic barrier approximation) and spin-dependent drift-diffusion model. Furthermore, our theoretical calculations predict that the inverse TMC effect could potentially reach 150% in MTJs with a positive and negative spin polarization of 65% and -42%, respectively. These theoretical and experimental findings provide a new insight into both static and dynamic spin-dependent transports. They will open up broader opportunities for device applications, such as magnetic logic circuits and multi-valued memory devices.

Discovery of the Pt-Based Superconductor LaPt5As.

A novel superconductor, LaPt5As, which exhibits a new crystal structure was discovered by high-pressure synthesis using a Kawai-type apparatus. A superconducting transition temperature was observed at 2.6 K. Depending on the sintering pressure, LaPt5As has superconducting and non-superconducting phases with different crystal structures. A sintering pressure of around 10 GPa is effective to form single-phase superconducting LaPt5As. This material has a very unique crystal structure with an extremely long c lattice parameter of over 60 Å and corner-sharing tetrahedrons composed of network-like Pt layers. Density functional theory calculations have suggested that the superconducting current flows through these Pt layers. Also, this unique layered structure characteristic of LaPt5As is thought to play a key role in the emergence of superconductivity. Furthermore, due to a stacking structure which makes up layers, various structural modifications for the LaPt5As family are conceivable. Since such a high-pressure synthesis using a Kawai-type apparatus is not common in the field of materials science, there is large room for further exploration of unknown phases which are induced by high pressure in various materials.

Selective Deposition of SiO2 on Ion Conductive Area of Soda-lime Glass Surface.

Selective deposition of SiO2 nanoparticles was demonstrated on a soda-lime glass surface with a periodic sodium deficient pattern formed using the electrical nanoimprint. Positively charged SiO2 particles generated using corona discharge in a cyclic siloxane vapor, were selectively deposited depending on the sodium pattern. For such phenomena to occur, the sodium ion migration to the cathode side was indispensable to the electrical charge compensation on the glass surface. Therefore, the deposition proceeded preferentially outside the alkali-deficient area. Periodic SiO2 structures with 424 nm and 180 nm heights were obtained using one-dimensional (6 µm period) and two-dimensional (500 nm period) imprinted patterns.

The fabrication of Ni quantum cross devices with a 17 nm junction and their current-voltage characteristics.

Quantum cross (QC) devices which consist of two Ni thin films deposited on polyethylene naphthalate substrates with their edges crossing have been fabricated and their current-voltage characteristics have been investigated. The cross-sectional area between the two Ni electrodes, which was obtained without the use of electron-beam or optical lithography, can be as small as 17 nm x 17 nm. We have successfully obtained ohmic current-voltage characteristics, which show good agreement with calculation results within the framework of the modified Anderson model. The calculated results also predict a high switching ratio in excess of 100,000:1 for QC devices having the molecule sandwiched between the Ni electrodes. This indicates that QC devices having the molecule can be expected to have potential application in novel switching devices.