ABSTRACT
The excitation functions for 64,66,67,68,70Zn(p,n)64,66,67,68,70Ga and 64,66,67,68,70Zn(p,2n)63,65,66,67,69Ga have been calculated for incident proton energies from threshold values to 30â¯MeV using the statistical model code TALYS-1.6. The (p,n) and (p,2n) cross sections have been calculated using both phenomenological Koning and Delaroche (KD) and semimicroscopic Jeukenne-Lejeune-Mahaux-Bruyeres (JLMB) optical model potentials. The phenomenological back-shifted Fermi gas model (BFM) and microscopic Hartree-Fock (HF) approaches for calculation of level densities have been compared in the present work. The pre-equilibrium process has been treated using exciton model. The sensitivity of cross section data to different models of optical model potential and level density have been investigated. It is found that the (p,n) and (p,2n) cross section calculations with semimicroscopic JLMB optical model potential and microscopic HF level density show agreement with the data. The (p,n) and (p,2n) cross section calculations have been compared with corresponding cross sections from nuclear data library, TENDL-2019. The (p,xn) cross sections obtained will be useful in several applications, particularly, for optimization of production routes for Ga isotopes.
ABSTRACT
Febuxostat exhibits unprecedented solid forms with a total of 40 polymorphs and pseudopolymorphs reported. Polymorphs differ in molecular arrangement and conformation, intermolecular interactions, and various physicochemical properties, including mechanical properties. Febuxostat Form Q (FXT Q) and Form H1 (FXT H1) were investigated for crystal structure, nanomechanical parameters, and bulk deformation behavior. FXT Q showed greater compressibility, densification, and plastic deformation as compared to FXT H1 at a given compaction pressure. Lower mechanical hardness of FXT Q (0.214 GPa) as compared to FXT H1 (0.310 GPa) was found to be consistent with greater compressibility and lower mean yield pressure (38 MPa) of FXT Q. Superior compaction behavior of FXT Q was attributed to the presence of active slip systems in crystals which offered greater plastic deformation. By virtue of greater compressibility and densification, FXT Q showed higher tabletability over FXT H1. Significant correlation was found with anticipation that the preferred orientation of molecular planes into a crystal lattice translated nanomechanical parameters to a bulk compaction process. Moreover, prediction of compactibility of materials based on true density or molecular packing should be carefully evaluated, as slip-planes may cause deviation in the structure-property relationship. This study supported how molecular level crystal structure confers a bridge between particle level nanomechanical parameters and bulk level deformation behavior.
Subject(s)
Febuxostat/chemistry , Nanoparticles/chemistry , Crystallization/methods , Hardness , Pressure , Structure-Activity Relationship , Tablets/chemistry , Tensile StrengthABSTRACT
The present study involves molecular docking, molecular dynamics (MD) simulation studies, and Caco-2 cell monolayer permeability assay to investigate the effect of structural modifications on PepT1-mediated transport of thyrotropin releasing hormone (TRH) analogs. Molecular docking of four TRH analogs was performed using a homology model of human PepT1 followed by subsequent MD simulation studies. Caco-2 cell monolayer permeability studies of four TRH analogs were performed at apical to basolateral and basolateral to apical directions. Inhibition experiments were carried out using Gly-Sar, a typical PepT1 substrate, to confirm the PepT1-mediated transport mechanism of TRH analogs. Papp of the four analogs follows the order: NP-1894 < NP-2378 < NP-1896 < NP-1895. Higher absorptive transport was observed in the case of TRH analogs, indicating the possibility of a carrier-mediated transport mechanism. Further, the significant inhibition of the uptake of Gly-Sar by TRH analogs confirmed the PepT1-mediated transport mechanism. Glide docking scores of all the four analogues were in good agreement with their transport rates, suggesting the role of substrate binding affinity in the PepT1-mediated transport of TRH analogs. MD simulation studies revealed that the polar interactions with amino acid residues present in the active site are primarily responsible for substrate binding, and a downward trend was observed with the increase in bulkiness at the N-histidyl moiety of TRH analogs.
Subject(s)
Intestinal Mucosa/metabolism , Models, Molecular , Symporters/chemistry , Thyrotropin-Releasing Hormone/chemistry , Binding Sites , Biological Transport , Caco-2 Cells , Chromatography, High Pressure Liquid , Computational Biology , Computer Simulation , Humans , Molecular Dynamics Simulation , Peptide Transporter 1 , Permeability , Symporters/metabolism , Symporters/physiology , Thyrotropin-Releasing Hormone/analogs & derivatives , Thyrotropin-Releasing Hormone/pharmacokineticsABSTRACT
In the present work, in-die and out-of-die compaction behaviour of dry-granulated powders of clopidogrel bisulphate (CLP) polymorphs, form I and form II, was investigated using a fully instrumented rotary tablet press. Each polymorph was compacted at three different roller pressures [70.3 (S1), 105.5 (S2) and 140.6 (S3)kgf/cm(2)], and obtained granules were characterized for their physico-mechanical properties. Compaction data were analyzed for out-of-die compressibility, tabletability and compactibility profiles, and in-die Heckel, Kawakita and Walker analysis. The roller compacted granules of both forms showed markedly different tabletting behaviour. Roller pressure exhibited a trend on compaction behaviour of form I granules, whereas, in case of form II, the effect was insignificant. Tabletability of the six granule batches follows the order; I_S1>I_S2>I_S3>II_S1≈II_S2≈II_S3. In case of form I, the reduced tabletability of the granules compacted at higher roller pressure was attributed to the decreased compressibility and plastic deformation. This was confirmed by compressibility plot and various mathematical parameters derived from Heckel (Py), Kawakita (1/b) and Walker (W) equations. The reduced tabletability of form I granules was due to 'granule hardening' during roller compaction. On the other hand, insignificant effect of roller compaction on tabletting behaviour of form II granules was attributed to brittle fragmentation. The extensive fragmentation of granules offered new 'clean' surfaces and higher contact points that negated the effect of granule hardening.
Subject(s)
Ticlopidine/analogs & derivatives , Clopidogrel , Compressive Strength , Drug Compounding , Particle Size , Powders , Pressure , Stress, Mechanical , Tablets , Ticlopidine/chemistryABSTRACT
11-Keto-ß-boswellic acid (KBA) is an important and potent boswellic acids responsible for anti-inflammatory action of Boswellia extract. However, its pharmaceutical development has been severely limited by its poor oral bioavailability. The present work aims to investigate the permeability related hurdles in oral delivery of KBA. Gastrointestinal stability, gastrointestinal metabolism, adsorption-desorption kinetics and Caco-2 permeability studies have been carried out. KBA was found poorly permeable with Papp value of 2.85 ± 0.14 × 10(-6)cm/s. Higher absorptive transport indicated role of carrier mediated transport. Moreover, KBA transport across monolayer showed saturation kinetics at higher concentrations. KBA exposed to 1α,25-(OH)2 vitamin D3 treated cell monolayer showed the lowest Papp value of 2.01×10(-6) ± 0.02 × 10(-6)cm/s indicating role of CYP3A4 mediated metabolism during KBA transport. Metabolic stability experiments in jejunum S9 fractions further confirmed this. KBA was found unstable in simulated gastrointestinal fluids and also got accumulated in the enterocytes. Sorption and desorption kinetic studies using Caco-2 cells further confirmed accumulation of KBA inside the enterocytes. KBA also showed pH dependent permeability with higher flux at gradient pH condition of pH 6.5 at apical and 7.4 at basolateral. Taken as whole, the major permeability related hurdles that hampered oral bioavailability of KBA included its gastrointestinal instability, CYP3A4 mediated intestinal metabolism, accumulation within the enterocytes and saturable kinetics. The present investigation may help in designing novel drug delivery system for KBA.
Subject(s)
Drug Delivery Systems/methods , Triterpenes/administration & dosage , Triterpenes/metabolism , Administration, Oral , Animals , Caco-2 Cells , Humans , Intestinal Absorption/drug effects , Intestinal Absorption/physiology , Male , Permeability/drug effects , Rats, Sprague-DawleyABSTRACT
The present work investigates the impact of milling on differential compactibility behavior of celecoxib (CEL) crystal habits. Plate shaped (CEL-P) crystals showed better compactibility over acicular (CEL-A) crystals. Milling improved the compactibility of both the forms. However, despite similar particle shape, size, and surface area, milled fractions of the two habits showed significantly different interparticulate bonding strength. The greater bonding strength of milled CEL-P (MCEL-P) over milled CEL-A (MCEL-A) was attributed to the differential cleavage behavior of the two habits that conferred the different surface molecular environment to the milled powders. The preferred cleavage of CEL-P across {020} plane exposed the -CF3 group and the methyl phenyl ring on the surface of MCEL-P. On the other hand, CEL-A preferentially fractured along their shortest axis that increased the exposure of {100} plane on the surface of MCEL-A, which exposed the -CF3 group and the pyrazole ring. Surface free energy quantified by determining advancing contact angle revealed greater dispersive component of MCEL-P over MCEL-A. This is consistent with the differential cleavage behavior of CEL-P and CEL-A. This confirmed the role of dispersive component of surface free energy in governing interparticulate bonding strength of CEL. The study supports the postulate that tablet tensile strength is governed by the dispersive intermolecular interactions formed over the interparticulate bonding area.
Subject(s)
Pyrazoles/chemistry , Sulfonamides/chemistry , Calorimetry, Differential Scanning , Celecoxib , Crystallization , Cyclooxygenase 2 Inhibitors/chemistry , Drug Compounding , Microscopy, Electron, Scanning , Particle Size , Porosity , Powder Diffraction , Powders , Surface Properties , Tablets , Tensile Strength , Thermogravimetry , X-Ray DiffractionABSTRACT
The purpose of this paper was to investigate the relaxation behavior of amorphous hesperetin (HRN), using dielectric spectroscopy, and assessment of its crystallization kinetics above glass transition temperature (Tg ). Amorphous HRN exhibited both local (ß-) and global (α-) relaxations. ß-Relaxation was observed below Tg , whereas α-relaxation prominently emerged above Tg . ß-Relaxation was found to be of Johari-Goldstein type and was correlated with α-process by coupling model. Secondly, isothermal crystallization experiments were performed at 363 K (Tg + 16.5 K), 373 K (Tg + 26.5 K), and 383 K (Tg + 36.5 K). The kinetics of crystallization, obtained from the normalized dielectric strength, was modeled using the Avrami model. Havriliak-Negami (HN) shape parameters, αHN and αHN .ßHN , were analyzed during the course of crystallization to understand the dynamics of amorphous phase during the emergence of crystallites. HN shape parameters indicated that long range (α-like) were motions affected to a greater extent than short range (ß-like) motions during isothermal crystallization studies at all temperature conditions. The variable behavior of α-like motions at different isothermal crystallization temperatures was attributed to evolving crystallites with time and increase in electrical conductivity with temperature.
Subject(s)
Crystallization/methods , Glass/chemistry , Hesperidin/chemistry , Kinetics , Temperature , Transition TemperatureABSTRACT
Markedly different mechanical behavior of powders of polymorphs, cocrystals, hydrate/anhydrate pairs, or structurally similar molecules has been attributed to the presence of active slip planes system in their crystal structures. Presence of slip planes in the crystal lattice allows easier slip under the applied compaction pressure. This allows greater plastic deformation of the powder and results into increased interparticulate bonding area and greater tensile strength of the compacts. Thus, based on this crystallographic feature, tableting performance of the active pharmaceutical ingredients can be predicted. Recently, we encountered a case where larger numbers of CH···O type interactions across the proposed slip planes hinder the slip and thus resist plastic deformation of the powder under the applied compaction pressure. Hence, attention must be given to these types of interactions while identifying slip planes by visualization method. Generally, slip planes are visualized as flat layers often strengthened by a two-dimensional hydrogen-bonding network within the layers or planes. No hydrogen bonding should exist between these layers to consider them as slip planes. Moreover, one should also check the presence of CH···O type interactions across these planes. Mercury software provides an option for visualization of these weak hydrogen bonding interactions. Hence, caution must be exercised while selecting appropriate solid form based on this crystallographic feature.
Subject(s)
Oxalic Acid/chemistry , Crystallization , Hydrogen Bonding , Models, Molecular , Powders , Tablets , Tensile StrengthABSTRACT
The water-induced ionic charge transport in compacted microcrystalline cellulose (MCC) has been reported to be governed by the densification behaviour. Hence, mechanical properties were expected to correlate with conductivity behaviour of MCC compacts. Both in-die and out-of-die compaction behaviour of MCC powder was investigated using a fully instrumented rotary tablet press. The dielectric measurements were carried out using a Novocontrol Concept 40 broadband dielectric spectrometer and dc conductivity (σdc) was extracted from the low frequency conductivity data at room temperature. As postulated, compaction pressure corresponding to maximum conductivity (σdc max) was observed to correlate with yield strength of MCC, determined using in-die and out-of-die Heckel analysis. Although Heckel transformation is most commonly used in pharmaceutical technology, its general use to characterise the mechanical properties of organic pharmaceutical materials has been criticized. The present study has provided experimental evidence that Heckel equation is practically useful to describe plastic deformation of organic pharmaceutical powders.
Subject(s)
Cellulose/chemistry , Algorithms , Dielectric Spectroscopy , Powders , ThermogravimetryABSTRACT
The present study investigates the effect of particle size on compaction behavior of forms I and II of ranitidine hydrochloride. Compaction studies were performed using three particle size ranges [450-600 (A), 300-400 (B), and 150-180 (C) µm] of both the forms, using a fully instrumented rotary tableting machine. Compaction data were analyzed for out-of-die compressibility, tabletability, and compactibility profiles and in-die Heckel and Kawakita analysis. Tabletability of the studied size fractions followed the order; IB > IA > > IIC > IIB > IIA at all the compaction pressures. In both the polymorphs, decrease in particle size improved the tabletability. Form I showed greater tabletability over form II at a given compaction pressure and sized fraction. Compressibility plot and Heckel and Kawakita analysis revealed greater compressibility and deformation behavior of form II over form I at a given compaction pressure and sized fraction. Decrease in particle size increased the compressibility and plastic deformation of both the forms. For a given polymorph, improved tabletability of smaller sized particles was attributed to their increased compressibility. However, IA and IB, despite poor compressibility and deformation, showed increased tabletability over IIA, IIB, and IIC by virtue of their greater compactibility. Microtensile testing also revealed higher nominal fracture strength of form I particles over form II, thus, supporting greater compactibility of form I. Taken as a whole, though particle size exhibited a trend on tabletability of individual forms, better compactibility of form I over form II has an overwhelming impact on tabletability.
Subject(s)
Chemistry, Pharmaceutical , Histamine H2 Antagonists/chemistry , Ranitidine/chemistry , Calorimetry, Differential Scanning , Particle Size , Powder DiffractionABSTRACT
P-glycoprotein (P-gp) is a plasma membrane efflux transporter belonging to ATP-binding cassette superfamily, responsible for multidrug resistance in tumor cells. Over-expression of P-gp in cancer cells limits the efficacy of many anticancer drugs. A clear understanding of P-gp substrate binding will be advantageous in early drug discovery process. However, substrate poly-specificity of P-gp is a limiting factor in rational drug design. In this investigation, we report a dynamic trans-membrane model of P-gp that accurately identified the substrate binding residues of known anticancer agents. The study included homology modeling of human P-gp based on the crystal structure of C. elegans P-gp, molecular docking, molecular dynamics analyses and binding free energy calculations. The model was further utilized to speculate substrate propensity of in-house anticancer compounds. The model demonstrated promising results with one anticancer compound (NSC745689). As per our observations, the molecule could be a potential lead for anticancer agents devoid of P-gp mediated multiple drug resistance. The in silico results were further validated experimentally using Caco-2 cell lines studies, where NSC745689 exhibited poor permeability (P app 1.03 ± 0.16 × 10(-6) cm/s) and low efflux ratio of 0.26.
Subject(s)
ATP Binding Cassette Transporter, Subfamily B, Member 1/metabolism , Antineoplastic Agents/metabolism , Antineoplastic Agents/pharmacology , Drug Resistance, Neoplasm , Neoplasms/drug therapy , ATP Binding Cassette Transporter, Subfamily B, Member 1/chemistry , Animals , Antineoplastic Agents/pharmacokinetics , Caco-2 Cells , Caenorhabditis elegans/chemistry , Caenorhabditis elegans/metabolism , Caenorhabditis elegans Proteins/metabolism , Computer Simulation , Crystallography, X-Ray , Humans , Models, Biological , Molecular Docking Simulation , Molecular Dynamics Simulation , Structural Homology, Protein , Substrate Specificity , ThermodynamicsABSTRACT
Polymorphs enable us to gain molecular insights into the compaction behavior of pharmaceutical powders. Two polymorphs (α and γ) of indomethacin (IMC) were investigated for in-die and out-of-die compaction behavior using compressibility, tabletability and compactibility (CTC) profile, stress-strain relationship, and Heckel, Kawakita and Walker equations. Compaction studies were performed on a fully instrumented rotary tabletting machine. CTC analysis revealed that the γ-form has increased compressibility while the α-form showed greater compactibility. The α-form also showed increased tabletability over the γ-form at all the compaction pressures. Lower values of Py (Heckel parameter) and 1/b (Kawakita parameter) indicated increased deformation behavior of γ-form. Stress-strain analysis also supports the increased compressibility of γ-form. In addition, Walker analysis showed higher compressibility coefficient (W) for α-form, consistent with its greater tabletability. Thus, tabletability of IMC polymorphs was governed by the compactibility of the material. Detailed examination of crystallographic data revealed that the presence of a slip plane system in the γ-form offered it increased compressibility and deformation behavior. However, the α-form showed greater compactibility by virtue of closer molecular packing (higher true density). Hence, although direct correlation between tabletability and the presence of slip planes in the crystals has been reported, prediction solely based on this crystallographic feature must be avoided. The present work reiterates the influence of the crystal packing on the tabletability of the pharmaceutical polymorphs.
Subject(s)
Indomethacin/chemistry , Calorimetry, Differential Scanning , Microscopy, Electron, Scanning , Models, Molecular , Porosity , Tensile Strength , X-Ray DiffractionABSTRACT
Good flow and compaction properties are prerequisites for successful compaction process. Apart from initial profile, mechanical properties of pharmaceutical powders can get modified during unit processes like milling. Milled powders can exhibit a wide range of particle size distribution. Further downstream processing steps like compaction can be affected by this differential particle size distribution. This has greatest implications for formulations like high dose drugs wherein the active pharmaceutical ingredient (API) contributes the maximum bulk in the final formulation. The present study assesses the impact of dry coating with ultrafine particles of same material, on the flow and compaction properties of the core material. Ibuprofen was selected as model drug as it has been reported to have poor mechanical properties. Ultrafine ibuprofen (average size 1.75 µm) was generated by Dyno(®) milling and was dry coated onto the core ibuprofen particles (average size 180 µm). Compaction studies were performed using a fully instrumented rotary tablet press. Compaction data was analyzed for compressibility, tabletability, compactibility profiles and Heckel plot. Dry coating of the ibuprofen exhibited greater compressibility and tabletability, at lower compaction pressure. However, at compaction pressure above 220 MPa, compressibility and tabletability of coated as well as uncoated materials were found to be similar. Heckel analysis also supported the above findings, as P(y) value of uncoated ibuprofen was found to be 229.49 MPa and for 2.0% ultrafine coated ibuprofen was found to be 158.53 MPa. Lower P(y) value of ultrafine coated ibuprofen indicated ease of plastic deformation. Superior compressibility and deformation behaviour of ultrafine coated ibuprofen attributed to increased interparticulate bonding area. This strategy can also be explored for improving tabletability of high dose poorly compressible drugs.
Subject(s)
Drug Compounding , Ibuprofen/chemistry , Particle Size , Pressure , TabletsABSTRACT
The present study, in general, is aimed to uncover the properties of the transport mechanism or mechanisms responsible for the uptake of NP-647 into Caco-2 cells and, in particular, to understand whether it is a substrate for the intestinal oligopeptide transporter, PEPT1 (SLC15A1). NP-647 showed a carrier-mediated, saturable transport with Michaelis-Menten parameters K(m) = 1.2 mM and V(max) = 2.2 µM/min. The effect of pH, sodium ion (Na(+)), glycylsarcosine and amoxicillin (substrates of PEPT1), and sodium azide (Na(+)/K(+)-ATPase inhibitor) on the flux rate of NP-647 was determined. Molecular docking and molecular dynamics simulation studies were carried out to investigate molecular interactions of NP-647 with transporter using homology model of human PEPT1. The permeability coefficient (P(appCaco-2)) of NP-647 (32.5 × 10(-6) cm/s) was found to be four times higher than that of TRH. Results indicate that NP-647 is transported into Caco-2 cells by means of a carrier-mediated, proton-dependent mechanism that is inhibited by Gly-Sar and amoxicillin. In turn, NP-647 also inhibits the uptake of Gly-Sar into Caco-2 cells and, together, this evidence suggests that PEPT1 is involved in the process. Docking and molecular dynamics simulation studies indicate high affinity of NP-647 toward PEPT1 binding site as compared to TRH. High permeability of NP-647 over TRH is attributed to its increased hydrophobicity which increases its affinity toward PEPT1 by interacting with the hydrophobic pocket of the transporter through hydrophobic forces.
Subject(s)
Anticonvulsants/pharmacokinetics , Symporters/metabolism , Thyrotropin-Releasing Hormone/analogs & derivatives , Amoxicillin/pharmacology , Anticonvulsants/chemistry , Anticonvulsants/metabolism , Biological Transport/drug effects , Caco-2 Cells , Cell Line, Tumor , Dipeptides/pharmacology , Drug Stability , Humans , Hydrogen-Ion Concentration , Hydrophobic and Hydrophilic Interactions , Intestinal Absorption/drug effects , Intestinal Mucosa/metabolism , Intestines/drug effects , Models, Molecular , Molecular Dynamics Simulation , Peptide Transporter 1 , Sodium/metabolism , Sodium Azide/metabolism , Symporters/chemistry , Thyrotropin-Releasing Hormone/chemistry , Thyrotropin-Releasing Hormone/metabolism , Thyrotropin-Releasing Hormone/pharmacokineticsABSTRACT
Being a density violator, clopidogrel bisulfate (CLP) polymorphic system (forms I and II) allows us to study individually the impact of molecular packing (true density) and thermodynamic properties such as heat of fusion on the compaction behavior. These two polymorphs of CLP were investigated for in-die and out-of-die compaction behavior using CTC profile, Heckel, and Walker equations. Compaction studies were performed on a fully instrumented rotary tabletting machine. Detailed examinations of the molecular packing of each form revealed that arrangement of the sulfate anion differs significantly in both crystal forms, thus conferring different compaction behavior to two forms. Close cluster packing of molecules in form I offers a rigid structure, which has poor compressibility and hence resists deformation under compaction pressure. This results into lower densification, higher yield strength, and mean yield pressure, as compared with form II at a given pressure. However, by virtue of higher bonding strength, form I showed superior tabletability, despite its poor compressibility and deformation behavior. Form I, having higher true density and lower heat of fusion showed higher bonding strength. Hence, true density and not heat of fusion can be considered predictor of bonding strength of the pharmaceutical powders.
Subject(s)
Platelet Aggregation Inhibitors/chemistry , Ticlopidine/analogs & derivatives , Clopidogrel , Crystallization , Models, Chemical , Porosity , Tablets , Tensile Strength , Ticlopidine/chemistry , X-Ray DiffractionABSTRACT
INTRODUCTION: The potential therapeutic applications of thyrotropin-releasing hormone (TRH) have attracted attention, based on its broad-spectrum neuropharmacological action rather than its endocrine properties. These central nervous system (CNS)-mediated effects provide the rationale for use of TRH and its analogs in the treatment of brain and spinal injury, and CNS disorders like schizophrenia, Alzheimer's disease, epilepsy, amyotrophic lateral sclerosis, Parkinson's disease, depression, shock and ischemia. AREAS COVERED: This review summarizes the patent literature and advances in the discovery and development of novel TRH analogs over the past 20 years. It provides a comprehensive overview of the development of new TRH analogs, giving emphasis to their pharmaceutical profile. EXPERT OPINION: The use of TRH in the treatment of various CNS disorders has been proven clinically. However, TRH itself is a poor drug candidate due to its short plasma half-life (5 min), poor biopharmaceutical properties (low intestinal and CNS permeability) and endocrine side effect. Nevertheless, researchers have come up with metabolically stable, more potent and selective TRH analogs and prodrugs. Taltirelin, one of the TRH analogs, has been approved under the trade name of Ceredist(®) in Japan for the treatment of spinocerebellar degeneration. Several other TRH analogs are in various stages of preclinical or clinical development.
Subject(s)
Central Nervous System Diseases/drug therapy , Drug Design , Thyrotropin-Releasing Hormone/pharmacology , Animals , Central Nervous System Diseases/physiopathology , Half-Life , Humans , Patents as Topic , Receptors, Thyrotropin-Releasing Hormone/drug effects , Receptors, Thyrotropin-Releasing Hormone/metabolism , Thyrotropin-Releasing Hormone/analogs & derivatives , Thyrotropin-Releasing Hormone/pharmacokinetics , Tissue DistributionABSTRACT
Results of measurement of residues formed in fusion of (6)Li with (198)Pt in the energy range of 0.68 < E/V(b) < 1.3 using a new sensitive off-beam technique are reported. The fusion excitation function and the derived average angular momenta do not indicate a change of slope at deep sub-barrier energies, contrary to recent observations. The present results for a system with weakly bound projectile confront the current understanding of the fusion hindrance at these low energies, underlying the role of internal reorganization on the dynamical path towards fusion.
ABSTRACT
We propose here a novel method of analysing turbulent momentum flux signals. The data for the analysis come from a nearly neutral atmospheric boundary layer and are taken at a height of 4m above ground corresponding to 1.1 x 10(5) wall units, within the log layer for the mean velocity. The method of analysis involves examining the instantaneous flux profiles that exceed a given threshold, for which an optimum value is found to be 1 s.d. of the flux signal. It is found feasible to identify normalized flux variation signatures separately for positive and negative 'flux events'-the sign being determined by that of the flux itself. Using these signatures, the flux signal is transformed to one of events characterized by the time of occurrence, duration and intensity. It is also found that both the average duration and the average time-interval between successive events are of order 1s, about four orders of magnitude higher than a wall unit in time. This episodic description of the turbulence flux in the time domain enables us to identify separately productive, counter-productive and idle periods (accounting, respectively, for 36, 15 and 49% of the time), taking as criterion the generation of the momentum flux. A 'burstiness' index of 0.72 is found for the data. Comparison with laboratory data indicates higher (/lower) ejection (/sweep) quadrant occupancy but lower (/higher) contributions to flux from the ejection (/sweep) quadrant at the high Reynolds numbers of the atmospheric boundary layer. Possible connections with the concept of active and passive motion in a turbulent boundary layer are briefly discussed.
ABSTRACT
Results for the cross section and average angular momentum for complete fusion at energies around the Coulomb barrier are presented for 7Li with 165Ho. Comparison of the cross sections with a one-dimensional barrier penetration model, using a potential consistent with the measured elastic scattering, showed a reduction above the barrier and an enhancement below it. An increase in the measured average angular momentum,