Encapsulation of AgNPs in a Lignin Isocyanate Film: Characterization and Antimicrobial Properties.

Lignin isolated from agricultural residues is a promising alternative for petroleum-based polymers as feedstocks in development of antimicrobial materials. A polymer blend based on silver nanoparticles and lignin-toluene diisocyanate film (AgNPs-Lg-TDIs) was generated from organosolv lignin and silver nanoparticles (AgNPs). Lignin was isolated from Parthenium hysterophorus using acidified methanol and used to synthesize lignin capped silver nanoparticles. Lignin-toluene diisocyanate film (Lg-TDI) was prepared by treating lignin (Lg) with toluene diisocyanate (TDI) followed by solvent casting to form films. Functional groups present and thermal properties of the films were evaluated using Fourier-transform infrared spectrophotometry (FT-IR), thermal gravimetry (TGA), and differential scanning calorimetry (DSC). Scanning electron microscopy (SEM), UV-visible spectrophotometry (UV-Vis), and Powder X-ray diffractometry (XRD) were used to assess the morphology, optical properties, and crystallinity of the films. Embedding AgNPs in the Lg-TDI films increased the thermal stability and the residual ash during thermal analysis, and the presence of powder diffraction peaks at 2θ = 20, 38, 44, 55, and 58° in the films correspond to lignin and silver crystal planes (111). SEM micrographs of the films revealed the presence of AgNPs in the TDI matrix with variable sizes of between 50 to 250 nm. The doped films had a UV radiation cut-off at 400 nm as compared to that of undoped films, but they did not exhibit significant antimicrobial activity against selected microorganisms.

Occurrence, distribution, and risk assessment of pharmerciuticals in wastewater and open surface drains of peri-urban areas: Case study of Juja town, Kenya.

The occurrence of Active Pharmaceutical Ingredients (APIs) in the environment is becoming a major area of concern due to their undesirable effects on non-target organisms. This study investigated the occurrence and risk of contamination by five antibiotics and three antiretrovirals drugs in a fast-growing peri-urban area in Kenya, with inadequate sewer system coverage. Due to poor sewage connectivity and poorly designed decentralized systems, wastewater is directly released in open drains. Water and sediment samples were collected from open surface water drains, while wastewater samples were collected from centralized wastewater treatment plants (WWTP). Solid-phase extraction and ultrasonic-assisted extraction for the aqueous and sediment samples respectively were carried out and extracts analyzed by liquid chromatography-electrospray ionization tandem mass spectrometry (LC-ESI-MS/MS) using isotopically labeled internal standards. APIs were observed with the detection frequency ranging from 36% to 100%. High mean concentrations of 48.7 µg L-1, 108 µg L-1, and 532 µg L-1 were observed in surface drains for Lamivudine (3 TC), Sulfamethoxazole (SMX), Ciprofloxacin (CIP) respectively. Drain sediments also showed high concentrations of APIs ranging from 2.1 to 13,100 µg kg-1. APIs in this study exceeded those observed in existing literature studies. JKUAT WWTP removal efficiencies varied from -90.68% to 72.67%. Total APIs emission load of the study area was 3550 mg d-1 with WWTP effluent contributing higher loads (2620 mg d-1) than surface water drains (640 mg d-1). Zidovudine (ZDV), nevirapine (NVP), and trimethoprim (TMP) loads in drains, however, exceeded WWTP effluent. Low to high ecotoxicity risk of the individual APIs were observed to the aquatic environment, with high risks for the development of antibiotic resistance in microbiome as determined by the risk quotient (RQ) approach. Risk management through efficient wastewater collection, conveyance, and treatment is necessary to suppress the measured concentrations.

Mass loading, distribution, and removal of antibiotics and antiretroviral drugs in selected wastewater treatment plants in Kenya.

The discharge of active pharmaceutical ingredients (APIs) into the aquatic environment from wastewater effluents is a concern in many countries. Although many studies have been conducted to evaluate the APIs removal efficiencies and emissions to the environment in wastewater treatment plants (WWTPs), most of these studies considered the aqueous and sludge phases, disregarding the suspended particulate matter (SPM) phase. To try to understand the role of the SPM, the occurrence of five most common antibiotics and three antiretroviral drugs (ARVDs) commonly used in Kenya were investigated in this study. APIs partitioning and mass loading in influents and effluents of three different WWTPs: trickling filters, stabilization ponds, and decentralized fecal sludge system, were evaluated. API concentration levels ranging from ˂LOQ (limit of quantification) to 92 µgL-1 and ˂LOQ to 82.2 mgkg-1 were observed in aqueous samples and solid samples respectively, with SPM accounting for most of the higher concentrations. The use of the aqueous phase alone for determination of removal efficiencies showed underestimations of API removal as compared to when solid phases are also considered. Negative removal efficiencies were observed, depending on the compound and the type of WWTP. The negative removals were associated with deconjugation of metabolites, aggregated accumulation of APIs in the WWTPs, as well as unaccounted hydraulic retention time during sampling. Compound characteristics, environmental factors, and WWTPs operation influenced WWTPs removal efficiencies. Wastewater stabilization ponds had the poorest removals efficiencies with an average of -322%. High total mass loads into the WWTPs influent and effluent of 22,729 and 22,385 mg day-1 1000 PE-1 were observed respectively. The results aims at aiding scientists and engineers in planning and designing of WWTPs. Findings also aim at aiding policy-making on pharmaceutical drug use and recommend proper wastewater management practices to manage the high mass loading observed in the WWTPs.

Occurrence of antibiotics and risk of antibiotic resistance evolution in selected Kenyan wastewaters, surface waters and sediments.

Active pharmaceutical ingredients, especially antibiotics, are micropollutants whose continuous flow into hydrological cycles has the potential to mediate antibiotic resistance in the environment and cause toxicity to sensitive organisms. Here, we investigated the levels of selected antibiotics in four wastewater treatment plants and the receiving water bodies. The measured environmental concentrations were compared with the proposed compound-specific predicted no-effect concentration for resistance selection values. The concentration of doxycycline, amoxicillin, sulfamethoxazole, trimethoprim, ciprofloxacin and norfloxacin within the influents, effluents, surface waters and river sediments ranged between 0.2 and 49.3 µgL-1, 0.1 to 21.4 µgL-1; ˂ 0.1 and 56.6 µgL-1; and 1.8 and 47.4 µgkg-1, respectively. Compared to the effluent concentrations, the surface waters upstream and downstream one of the four studied treatment plants showed two to five times higher concentrations of ciprofloxacin, norfloxacin and sulfamethoxazole. The risk quotient for bacterial resistance selection in effluent and surface water ranged between ˂0.1 and 53, indicating a medium to high risk of antibiotic resistance developing within the study areas. Therefore, risk mitigation and prevention strategies are a matter of priority in the affected areas.