ABSTRACT
Over the past century, understanding the nature of shock compression of condensed matter has been a major topic. About 20 years ago, a femtosecond laser emerged as a new shock-driver. Unlike conventional shock waves, a femtosecond laser-driven shock wave creates unique microstructures in materials. Therefore, the properties of this shock wave may be different from those of conventional shock waves. However, the lattice behaviour under femtosecond laser-driven shock compression has never been elucidated. Here we report the ultrafast lattice behaviour in iron shocked by direct irradiation of a femtosecond laser pulse, diagnosed using X-ray free electron laser diffraction. We found that the initial compression state caused by the femtosecond laser-driven shock wave is the same as that caused by conventional shock waves. We also found, for the first time experimentally, the temporal deviation of peaks of stress and strain waves predicted theoretically. Furthermore, the existence of a plastic wave peak between the stress and strain wave peaks is a new finding that has not been predicted even theoretically. Our findings will open up new avenues for designing novel materials that combine strength and toughness in a trade-off relationship.
ABSTRACT
Ti-(50-x)Ni-xFe alloys exhibit a thermally induced B2-R martensitic transformation (MT) when x is between 1.5% and 5.7%, whereas this transformation is suppressed when x is 6 at% and higher. We studied the reason for this suppression by applying compressive stress in the [110]B2 direction to single-crystalline Ti-44Ni-6Fe and Ti-42Ni-8Fe (at%) alloys. Under stress, these alloys exhibit a B2-R MT with a large temperature hysteresis of ≥50 K. The B2-R MT in these alloys is probably thermally arrested, and a small entropy change is a possible reason for this arrest. The Young's modulus E[110] of these alloys significantly decreases with decreasing temperature, and the B2-R MT under stress occurs at a temperature where E[110] is approximately 50 GPa. Presumably, lattice softening assists the B2-R MT.
ABSTRACT
Ti-51Ni (at%) alloys including coherent precipitates of Ti3Ni4 exhibits thermally-induced B2-R transformation. If the Ti3Ni4 is formed under tensile stress, it orientates preferentially so that its habit plane becomes perpendicular to the tensile axis. In such specimens, stress-induced reverse R-B2 transformation is reported to occur. In the present study, the stress-induced reverse R-B2 transformation behavior was studied by infrared camera and in situ X-ray analysis. The infrared camera observation revealed that the temperature of the specimen decreases homogeneously by the application of tensile stress within the resolution of the camera. The in situ X-ray analysis revealed that stress-induced reverse R-B2 transformation and rearrangement of variants of the R-phase occurs simultaneously in the specimen.
ABSTRACT
Fe68.8Pd31.2 exhibits an anomalously large magnetostriction of ~400 ppm at room temperature as well as linear, isotropic, and hysteresis free magnetization behavior. This near perfectly reversible magnetic response is attributable to the presence of a large number of premartensitic magnetoelastic twin clusters present in the system made possible through the elastic softening that occurs near a martensitic transformation temperature of 252 K. It is proposed that the twin clusters in the material reduce both internal elastic and magnetic energy, causing the elastic and magnetic behavior of the material to be intimately linked. In such a framework, the anisotropy energy becomes extremely low causing the material to bear no crystalline dependence on magnetization, and application of a magnetic field causes simultaneous magnetic and twin domain movement which relaxes the system.
ABSTRACT
A Fe-31.2Pd (at.%) alloy exhibits a weak first-order martensitic transformation from a cubic structure to a tetragonal structure near 230 K. This transformation is associated with significant softening of elastic constant C'. Because of the softening, the alloy shows a large elastic strain of more than 6% in the [001] direction. In addition, the alloy has a critical point and shows a high elastocaloric effect in a wide temperature range for both the parent and the martensite phases.This article is part of the themed issue 'Taking the temperature of phase transitions in cool materials'.
ABSTRACT
We have recently constructed a phenomenological theory that provides a unified explanation for athermal and isothermal martensitic transformation processes. On the basis of this theory, we predict some properties of martensitic transformation and confirm them experimentally using some Fe-based alloys and a Ni-Co-Mn-In magnetic shape memory alloy.
