ABSTRACT
Modern high-strength steels achieve their strength exclusively through the manufacturing process, as the chemical composition of these steels is very similar to the composition of standard-quality steels. Typically, hot-dip galvanizing is used to form a protective zinc layer on the steel parts of structures; nonetheless, the material is exposed to high temperatures during the process. With high-strength steels, this can lead to deterioration of the mechanical properties. This study aims to experimentally examine and evaluate the extent of deterioration of the mechanical properties of high-strength-steel members. The effect was studied on specimens made of three different types of steel with the yield strength ranging from 460 to 1250 MPa. For each type of steel, selected mechanical properties-yield strength, tensile strength, and hardness-were determined on specimens with and without hot-dip galvanization, and the obtained results were mutually compared. Our study shows a significant impact of the hot-dip galvanization process on the mechanical properties of some high-strength steels. With the studied types of steel, the yield strength decreased by up to 18%, the tensile strength by up to 13%, and the hardness by up to 55%.
ABSTRACT
Stainless-steel elements are increasingly used in a wide range of load-bearing structures due to their strength, minimal maintenance requirements, and aesthetic appearance. Their response differs from standard steels; therefore, it is necessary to choose a different procedure when creating a correct computational model. Seven groups of numerical models differing in the used formulation of elements integration, mesh density localization, nonlinear material model, and initial geometric imperfection were calibrated. The results of these advanced simulations were validated with published results obtained by an extensive experimental approach on circular hollow sections columns. With regard to the different slenderness of the cross-sections, the influence of the initial imperfection in the form of global and local loss of stability on the response was studied. Responses of all models were validated by comparing the averaged normalized ultimate loads and the averaged normalized deflections with experimentally obtained results.
