Supercritical CO2 Impregnation of Thymol in Thermoplastic Starch-Based Blends: Chemico-Physical Properties and Release Kinetics.

The aim of the present study was to investigate starch-based materials, prepared in an environmentally friendly way and from renewable resources, suitable for the development of biodegradable active food packaging. For this purpose, a bioactive compound (thymol) was incorporated into thermoplastic starch (TPS) and a TPS blend with poly (ε-caprolactone) (TPS-PCL) by the supercritical CO2 (scCO2) impregnation process. Impregnation experiments with scCO2 were carried out at a pressure of 30 MPa and temperatures in the range of 40-100 °C during 1 to 20 h. The structural, morphological, and thermal properties of the obtained materials were comprehensively evaluated. Bioactive component release kinetic studies were performed in water at 6 °C and 25 °C. It was shown that the scCO2 impregnation process could be successfully employed for thymol loading into TPS and TPS-PCL. The process was significantly influenced by the operating temperature and time as well as content of PCL. The samples showed a controlled release of thymol within seven days with a higher amount of released thymol from the TPS-PCL blend. The obtained materials are solvent-free and release the bioactive component in a controlled manner.

Polyhydroxyalkanoate/Antifungal Polyene Formulations with Monomeric Hydroxyalkanoic Acids for Improved Antifungal Efficiency.

Novel biodegradable and biocompatible formulations of "old" but "gold" drugs such as nystatin (Nys) and amphotericin B (AmB) were made using a biopolymer as a matrix. Medium chain length polyhydroxyalkanoates (mcl-PHA) were used to formulate both polyenes (Nys and AmB) in the form of films (~50 µm). Thermal properties and stability of the materials were not significantly altered by the incorporation of polyenes in mcl-PHA, but polyene containing materials were more hydrophobic. These formulations were tested in vitro against a panel of pathogenic fungi and for antibiofilm properties. The films containing 0.1 to 2 weight % polyenes showed good activity and sustained polyene release for up to 4 days. A PHA monomer, namely 3-hydroxydecanoic acid (C10-OH), was added to the films to achieve an enhanced synergistic effect with polyenes against fungal growth. Mcl-PHA based polyene formulations showed excellent growth inhibitory activity against both Candida yeasts (C. albicans ATCC 1023, C. albicans SC5314 (ATCC MYA-2876), C. parapsilosis ATCC 22019) and filamentous fungi (Aspergillus fumigatus ATCC 13073; Trichophyton mentagrophytes ATCC 9533, Microsporum gypseum ATCC 24102). All antifungal PHA film preparations prevented the formation of a C. albicans biofilm, while they were not efficient in eradication of mature biofilms, rendering them suitable for the transdermal application or as coatings of implants.

Design and characterization of alcalase-chitosan conjugates as potential biocatalysts.

In this study, alcalase (protease from Bacillus licheniformis) immobilization by adsorption, enzyme crosslinking and covalent enzyme binding to activated chitosan microbeads were examined. The biocatalysts highest activity was obtained by covalent immobilization of alcalase onto a solid support. The alcalase covalent immobilization onto different types of chitosan beads obtained by inverse emulsion technique and electrostatic extrusion was studied. Parameters examined under different conditions were beads diameter, enzyme loading, enzyme capacity yield, and biocatalyst activity. The highest activity and enzyme loading of 23.6 IU/mg protein and 340.2 mg/g, respectively, were achieved by the enzyme immobilized onto chitosan microbeads obtained by the electrostatic extrusion technique. FT-IR analysis was used to confirm formation of alcalase-chitosan conjugates. The activity of optimally produced alcalase-chitosan microbeads was then verified in the industrially feasible reaction systems of egg white and soy protein hydrolysis. The high degree of hydrolysis of 29.85 ± 0.967% after 180 min and five successive reuses obtained under real conditions (50 °C, pH 8) verified the covalently bound alcalase to chitosan beads a promising candidate for use in industrial egg white protein hydrolysis process.

Chitosan crosslinked microparticles with encapsulated polyphenols: Water sorption and release properties.

Chitosan-glutaraldehyde microparticles were produced by emulsion crosslinking method to be used as drug delivery system for polyphenols from Thymus serpyllum L. aqueous extract. The effect of preparation conditions, chitosan concentration (1.5-3% w/v), and glutaraldehyde/chitosan (GA/Ch) mass ratio (0.15-1.20) on water and polyphenols transport properties was investigated. Swelling ratio of dry particles (68-230 µm) in water ranged from 280% to 530%, depending on the formulation. The decrease in swelling was observed with increased GA/Ch mass ratio (i.e. crosslinking degree) at the same chitosan concentration, or with increased chitosan concentration at the same GA/Ch mass ratio. The increase in GA/Ch mass ratio was also manifested by increased particle compactness i.e. decreased size and reduced surface roughness. The sorption capacity for polyphenols seems to be a complex interplay of swelling behaviour and interactions chitosan-glutaraldehyde-polyphenols identified by Fourier transmission infrared analysis. An increase in crystallinity of chitosan was observed upon crosslinking with glutaraldehyde and encapsulation of polyphenols, as observed by X-ray diffraction analysis. The results obtained from release kinetics of selected polyphenolic compounds (caffeic acid, rosmarinic acid, total flavonoids, and total phenol content) showed that polyphenols were released at a lower amount (2-4 times) in water, but more rapidly (45-120 min) in comparison with the release in gastric followed by intestinal simulated fluid (SGF-SIF) (120-240 min). The experimental results of the time-dependent swelling in water and polyphenols release in both, water and SGF-SIF, were analyzed with several mathematical models. The results depicted Fickian diffusion as the water transport mechanism. In the case of polyphenols, only empirical Weibull model could be suggested for describing release kinetics.

Stimuli-sensitive hydrogel based on N-isopropylacrylamide and itaconic acid for entrapment and controlled release of Candida rugosa lipase under mild conditions.

Stimuli responsive pH- and temperature-sensitive hydrogel drug delivery systems, as those based on N-isopropylacrylamide (NiPAAm) and itaconic acid (IA), have been attracting much of the attention of the scientific community nowadays, especially in the field of drug release. By adjusting comonomer composition, the matrix is enabled to protect the incorporated protein in the highly acidic environment of upper gastrointestinal tract and deliver it in the neutral or slightly basic region of the lower intestine. The protein/poly(NiPAAm-co-IA) hydrogels were synthetized by free radical crosslinking copolymerization and were characterized concerning their swelling capability, mechanical properties, and morphology. The pore structure and sizes up to 1.90 nm allowed good entrapment of lipase molecules. Model protein, lipase from Candida rugosa, was entrapped within hydrogels upon mild conditions that provided its protection from harmful environmental influences. The efficiency of the lipase entrapment reached 96.7%, and was dependent on the initial concentration of lipase solution. The swelling of the obtained hydrogels in simulated pH and temperature of gastrointestinal tract, the lipase entrapment efficiency, and its release profiles from hydrogels were investigated as well.

Catalyzed ester synthesis using Candida rugosa lipase entrapped by poly(N-isopropylacrylamide-co-itaconic acid) hydrogel.

This study reports the synthesis of polymeric matrices based on N-isopropylacrylamide and itaconic acid and its application for immobilization of lipase from Candida rugosa. The lipase was immobilized by entrapment method. Free and immobilized lipase activities, pH and temperature optima, and storage stability were investigated. The optimum temperature for free and entrapped lipase was found to be 40 and 45 °C, while the optimum pH was observed at pH 7 and 8, respectively. Both hydrolytic activity in an aqueous medium and esterolytic activity in an organic medium have been evaluated. Maximum reaction rate (V max) and Michaelis-Menten constants (K m ) were also determined for immobilized lipase. Storage stability of lipase was increased as a result of immobilization process. Furthermore, the operational stability and reusability of the immobilized lipase in esterification reaction have been studied, and it was observed that after 10 cycles, the residual activity for entrapped lipase was as high as 50%, implying that the developed hydrogel and immobilized system could provide a promising solution for the flavor ester synthesis at the industrial scale.

Controlled release of lipase from Candida rugosa loaded into hydrogels of N-isopropylacrylamide and itaconic acid.

The series of poly(N-isopropylacrylamide-co-itaconic acid) hydrogels, with lipase from Candida rugosa as a model protein, were synthesized by free radical copolymerization. The composition of hydrogels was varied by monomers ratio, crosslinking agent concentration and amounts of lipase, which was loaded by in situ polymerization. All samples were characterized regarding morphology. The investigation of hydrogel swelling properties revealed their pH and temperature sensitive character. Protein loading efficiency, release profiles and the specific activity yield of the released lipase were also investigated as a function of hydrogel composition, protein content and pH, at the physiological temperature of 37 °C. Copolymers of N-isopropylacrylamide and itaconic acid presented high lipase loading efficiency. Another very important feature of these copolymers was that the protein release kinetic strongly depended on the pH value of the medium. The diffusion exponents values around 1 denoted that these hydrogel compositions could be adjusted to follow near zero-order kinetics. Namely, hydrogel formulations released low amounts of lipase at pH 2.20, but much higher released protein quantities were observed at pH 6.80 enabling these copolymers to be attractive candidates as site specific protein oral drug delivery systems.

Sorption of zinc by novel pH-sensitive hydrogels based on chitosan, itaconic acid and methacrylic acid.

Novel pH-sensitive hydrogels based on chitosan, itaconic acid and methacrylic acid were applied as adsorbents for the removal of Zn(2+) ions from aqueous solution. In batch tests, the influence of solution pH, contact time, initial metal ion concentration and temperature was examined. The sorption was found pH dependent, pH 5.5 being the optimum value. The adsorption process was well described by the pseudo-second order kinetic. The hydrogels were characterized by spectral (Fourier transform infrared-FTIR) and structural (SEM/EDX and atomic force microscopy-AFM) analyses. The surface topography changes were observed by atomic force microscopy, while the changes in surface composition were detected using phase imaging AFM. The negative values of free energy and enthalpy indicated that the adsorption is spontaneous and exothermic one. The best fitting isotherms were Langmuir and Redlich-Peterson and it was found that both linear and nonlinear methods were appropriate for obtaining the isotherm parameters. However, the increase of temperature leads to higher adsorption capacity, since swelling degree increased with temperature.

Hydrogels of N-isopropylacrylamide copolymers with controlled release of a model protein.

Temperature- and pH-sensitive hydrogels, based on N-isopropylacrylamide (NiPAAm) and itaconic acid (IA), were synthesized by free radical crosslinking copolymerization in the presence of lipase from Candida rugosa. The samples were characterized for their sensitivity to the changes of external conditions and the ability to control the release of a hydrophilic model protein, lipase. These hydrogels were highly responsive to temperature and pH, at constant ionic strength. Parameters, such as the crosslinking degree and non-ionic/ionic (NiPAAm/IA) ratio, were found to impact the hydrogel structure, mechanical properties, morphology and swelling kinetics at different pH and temperatures. The hydrogels demonstrated protein loading efficiency as high as 95 wt%. Release studies of a hydrophilic model protein at a physiological temperature of 37 degrees C were performed at different pH values. High dependence of lipase release kinetics on hydrogel structure and the environmental pH was found, showing generally low release rates, lower in acidic media (pH 2.20) and higher at higher pHs (6.80). Lipase activity was retained even after treatment conditions that would provoke denaturation of the enzyme if it was not protected in the gel. The obtained hydrogels were found suitable for releasing therapeutic proteins in a controlled manner at specific sites in gastrointestinal tract.