Whey protein-loaded 3D-printed poly (lactic) acid scaffolds for wound dressing applications.

Chronic skin wounds pose a global clinical challenge, necessitating effective treatment strategies. This study explores the potential of 3D printed Poly Lactic Acid (PLA) scaffolds, enhanced with Whey Protein Concentrate (WPC) at varying concentrations (25, 35, and 50% wt), for wound healing applications. PLA's biocompatibility, biodegradability, and thermal stability make it an ideal material for medical applications. The addition of WPC aims to mimic the skin's extracellular matrix and enhance the bioactivity of the PLA scaffolds. Fourier Transform Infrared Spectroscopy (FTIR) results confirmed the successful loading of WPC into the 3D printed PLA-based scaffolds. Scanning Electron Microscopy (SEM) images revealed no significant differences in pore size between PLA/WPC scaffolds and pure PLA scaffolds. Mechanical strength tests showed similar tensile strength between pure PLA and PLA with 50% WPC scaffolds. However, scaffolds with lower WPC concentrations displayed reduced tensile strength. Notably, all PLA/WPC scaffolds exhibited increased strain at break compared to pure PLA. Swelling capacity was highest in PLA with 25% WPC, approximately 130% higher than pure PLA. Scaffolds with higher WPC concentrations also showed increased swelling and degradation rates. Drug release was found to be prolonged with increasing WPC concentration. After seven days of incubation, cell viability significantly increased in PLA with 50% WPC scaffolds compared to pure PLA scaffolds. This innovative approach could pave the way for personalized wound care strategies, offering tailored treatments and targeted drug delivery. However, further studies are needed to optimize the properties of these scaffolds and validate their effectiveness in clinical settings. .

Design and in vitro evaluation of curcumin-loaded PLGA nanoparticle-embedded sodium alginate/gelatin 3D printed scaffolds for Alzheimer's disease.

BACKGROUND: Targeted nanoparticles (NPs) are aimed at improving clinical outcomes by enhancing the diagnostic and therapeutic efficacy of drugs in the treatment of Alzheimer's disease (AD). METHODS: Curcumin (CUR)-loaded poly-lactic-co-glycolic acid (PLGA) NPs (CNPs) were produced to demonstrate a prolonged release and successfully embedded into 3D printed sodium alginate (SA)/gelatin (GEL) scaffolds that can dissolve rapidly sublingually. Characterization and in vitro activity of the NPs and scaffolds were evaluated. RESULTS: Based on the in vitro drug release studies, 99.6 % of the encapsulated CUR was released in a controlled manner within 18 days for the CNPs. In vitro cell culture studies showed that all samples exhibited cell viability above 84.2 % and no significant cytotoxic effect on SH-SY5Y cells. The samples were analyzed through 2 different pathways by PCR analysis. Real-time PCR results indicated that CNP and CNP-embedded SA/GEL scaffolds (CNPSGS) may show neuroprotective effects by modulating the Wnt/ß-catenin pathway. The gene expression level of ß-catenin slightly increased compared to the gene expression levels of other proteins and enzymes with these treatments. However, the PI3K/Akt/GSK-3ß signaling pathway was regulated at the same time because of the crosstalk between these 2 pathways. CONCLUSION: CNPSGS might be an effective therapeutic alternative for AD treatment.

Understanding neck collar preferences and user experiences in motor neuron disease: A survey-based study.

BACKGROUND: Motor Neurone Disease (MND), is a debilitating neurodegenerative condition, which significantly impacts the quality of life of those affected. Neck weakness is one challenge faced by those living with MND and as such may require a neck collar to assist. However, the user experience and requirements related to these neck collars have not been comprehensively explored. Understanding these priorities is crucial for enhancing the well-being of MND patients. OBJECTIVE: To understand the priorities of people living with Motor Neurone Disease (MND) including user experience, requirements and the importance of neck collars used to aid neck weakness. METHODS: An online survey was used to investigate the perspectives and experiences of off the shelf neck collars used by people living with MND. The MND Association was selected as a strategic partner by their affiliations and access to large data base of MND patients. RESULTS: Survey highlighted a disparity between the actual duration MND patients wear their current neck collars and their desired duration, emphasising the need to integrate collars into daily activities. Key areas for improvement with existing neck collars centred on comfort and reduced restriction, with respondents expressing a preference for collars that offer support without impeding movement. Additionally, addressing pressure on the anterior neck region during collar use emerged as a critical requirement. CONCLUSION: Current collars do not cause any clinical complications; however, they do fall short of meeting the expected needs of people living with MND, including discomfort, restricted movement, and pressure to the anterior region of the neck. This study highlights need to improve current collar designs to provide better quality of life for MND patients.

Vitamin B12-loaded chitosan-based nanoparticle-embedded polymeric nanofibers for sublingual and transdermal applications: Two alternative application routes for vitamin B12.

Alzheimer's disease (AD) is a neurodegeneration type that is biologically recognizable via ß-amyloid plaques and tau neurofibril tangles. Global estimation for the total count of individuals enduring AD will rise up to 131 million by 2050. Investigations suggested the existence of a direct proportion between the likelihood of AD occurrence and vitamin B12 (VB12) hypovitaminosis. Approved VB12 administrations, intramuscular and oral, each has serious defects broaching the demand for alternative routes. This work developed VB12-loaded chitosan/tripolyphosphate/polyvinyl alcohol (CS/TPP/PVA) nanoparticles (NPs) embedded in polyvinylpyrrolidone (PVP) and polyvinylpyrrolidone/polycaprolactone (PVP/PCL) nanofibrous (NFs) produced by pressurized gyration (PG) for sublingual and transdermal routes, respectively. Biomaterials were investigated morphologically, chemically, and thermally. Moreover, degradation, disintegration, release behavior, and release kinetics were analyzed. The effectiveness and safety of nanomaterials were assessed and proven with the alamarBlue test on the Aß1-42-induced SH-SY5Y model. The final evaluation suggested the feasibility, safety, and effectiveness of produced systems. Consequently, two alternative VB12 application routes were developed with high effectivity and low toxicity with the power of nanotechnology.

Fabrication of ethosuximide loaded alginate/polyethylene oxide scaffolds for epilepsy research using 3D-printing method.

Epilepsy is a medical condition that causes seizures and impairs the mental and physical activities of patients. Unfortunately, over one-third of patients do not receive adequate relief from oral Antiepileptic Drugs (AEDs) and continue to experience seizures. In addition to that, long term usage of Antiepileptic Drugs can cause a range of side effects. To overcome this problem, the precision of 3D printing technology is combined with the controlled release capabilities of biodegradable polymers, allowing for tailored and localized AED delivery to specific seizure sites. As a result of this novel technique, therapeutic outcomes can be enhanced, side effects of AEDs are minimized, and patient-specific dosage forms can be created. This study focused on the use of ethosuximide, an antiepileptic drug, at different concentrations (10, 13, and 15 mg) loaded into 3D-printed sodium alginate and polyethylene oxide scaffolds. The scaffolds contained varying concentrations (0.25%, 0.50%, and 0.75% w/v) and had varying pores created by 3D patterning sizes from 159.86 ± 19.9 µm to 240.29 ± 10.7 µm to optimize the releasing system for an intracranial administration. The addition of PEO changed the Tg and Tm temperatures from 65°C to 69°C and from 262°C to 267°C, respectively. Cytotoxicity assays using the human neuroblastoma cell line (SH-SY5Y) showed that cell metabolic activity reached 130% after 168 h, allowing the cells to develop into mature neural cells. In vitro testing demonstrated sustained ethosuximide release lasting 2 hours despite crosslinking with 3% CaCl2. The workpaves the way for the use of ethosuximide -loaded scaffolds for treating epilepsy.

Advanced Applications of Silk-Based Hydrogels for Tissue Engineering: A Short Review.

Silk has been consistently popular throughout human history due to its enigmatic properties. Today, it continues to be widely utilized as a polymer, having first been introduced to the textile industry. Furthermore, the health sector has also integrated silk. The Bombyx mori silk fibroin (SF) holds the record for being the most sustainable, functional, biocompatible, and easily produced type among all available SF sources. SF is a biopolymer approved by the FDA due to its high biocompatibility. It is versatile and can be used in various fields, as it is non-toxic and has no allergenic effects. Additionally, it enhances cell adhesion, adaptation, and proliferation. The use of SF has increased due to the rapid advancement in tissue engineering. This review comprises an introduction to SF and an assessment of the relevant literature using various methods and techniques to enhance the tissue engineering of SF-based hydrogels. Consequently, the function of SF in skin tissue engineering, wound repair, bone tissue engineering, cartilage tissue engineering, and drug delivery systems is therefore analysed. The potential future applications of this functional biopolymer for biomedical engineering are also explored.

Surface Engineering of Bioactive Coatings for Improved Stent Hemocompatibility: A Comprehensive Review.

Cardiovascular diseases continue to be a major contributor to illness and death on a global scale, and the implementation of stents has given rise to a revolutionary transformation in the field of interventional cardiology. The thrombotic and restenosis complications associated with stent implantation pose ongoing challenges. In recent years, bioactive coatings have emerged as a promising strategy to enhance stent hemocompatibility and reduce thrombogenicity. This review article provides an overview of the surface engineering techniques employed to improve the hemocompatibility of stents and reduce thrombus formation. It explores the mechanisms underlying thrombosis and discusses the factors influencing platelet activation and fibrin formation on stent surfaces. Various bioactive coatings, including anticoagulant agents, antiplatelet agents, and surface modifications, are discussed in detail, highlighting their potential in reducing thrombogenicity. This article also highlights a multitude of surface modification techniques which can be harnessed to enhance stent hemocompatibility including plasma treatment, physical vapor deposition (PVD), chemical vapor deposition (CVD), and electrodeposition. These techniques offer precise control over surface properties such as roughness, charge, and composition. The ultimate goal is to reduce platelet adhesion, tailor wettability, or facilitate the controlled release of bioactive agents. Evaluation methods for assessing hemocompatibility and thrombogenicity are also reviewed, ranging from in vitro assays to animal models. Recent advances in the field, such as nanotechnology-based coatings and bioactive coatings with controlled drug release systems, are highlighted. Surface engineering of bioactive coatings holds great promise for enhancing the long-term outcomes of stent implantation by enhancing hemocompatibility and reducing thrombogenicity. Future research directions and potential clinical applications are discussed, underscoring the need for continued advancements in this field.

Accuracy of 3D printed spine models for pre-surgical planning of complex adolescent idiopathic scoliosis (AIS) in spinal surgeries: a case series.

Adolescent idiopathic scoliosis (AIS) is a noticeable spinal deformity in both adult and adolescent population. In majority of the cases, the gold standard of treatment is surgical intervention. Technological advancements in medical imaging and 3D printing have revolutionised the surgical planning and intraoperative decision making for surgeons in spinal surgery. However, its applicability for planning complex spinal surgeries is poorly documented with human subjects. The objective of this study is to evaluate the accuracy of 3D printed models for complex spinal deformities based on Cobb angles between 40° to 95°.This is a retrospective cohort study where, five CT scans of the patients with AIS were segmented and 3D printed for evaluating the accuracy. Consideration was given to the Inter-patient and acquisition apparatus variability of the CT-scan dataset to understand the effect on trueness and accuracy of the developed CAD models. The developed anatomical models were re-scanned for analysing quantitative surface deviation to assess the accuracy of 3D printed spinal models. Results show that the average of the root mean square error (RMSE) between the 3DP models and virtual models developed using CT scan of mean surface deviations for the five 3d printed models was found to be 0.5±0.07 mm. Based on the RMSE, it can be concluded that 3D printing based workflow is accurate enough to be used for presurgical planning for complex adolescent spinal deformities. Image acquisition and post processing parameters, type of 3D printing technology plays key role in acquiring required accuracy for surgical applications.

Optimal strategies for addressing developmental breast asymmetry and the significance of symmetrical treatment: A systematic review.

BACKGROUND: Approximately one quarter of women are affected by asymmetry as a result of abnormal breast development, which can lead to significant emotional distress. Despite this, there is currently no widely accepted approach for managing this prevalent condition. This systematic review aimed to review the available literature on the management of developmental breast asymmetry. METHODS: A comprehensive search in MEDLINE, EMBASE, and CENTRAL databases was conducted for primary clinical studies reporting on the management of developmental breast asymmetry from 1962 to November 2022. The primary outcome measures were long-term aesthetic outcomes and patient-reported outcomes. RESULTS: Eleven case series and 2 cohort studies were included, comprising a total of 1237 patients with a mean age of 26.5 years (range 14-65 years). Twelve studies (92%) addressed asymmetry through surgical means, using various augmentation and reduction procedures, whereas one study (8%) utilized external prostheses. Meta-analysis of the data was not deemed to be possible because of heterogeneity of data; a narrative synthesis of the literature was provided. CONCLUSIONS: There is no consensus on how to manage developmental breast asymmetry. Furthermore, there is a lack of consistency in the classification of patients with developmental breast asymmetry and in the reporting of outcomes, highlighting the need for a consensus. Further research outlining long-term aesthetic and patient-reported outcomes is needed to understand which procedures provide optimal outcomes. In addition, external breast prosthesis is a promising nonsurgical alternative, and further studies into its efficacy are needed.

Bacterial glycobiotechnology: A biosynthetic route for the production of biopharmaceutical glycans.

The recent advancement in the human glycome and progress in the development of an inclusive network of glycosylation pathways allow the incorporation of suitable machinery for protein modification in non-natural hosts and explore novel opportunities for constructing next-generation tailored glycans and glycoconjugates. Fortunately, the emerging field of bacterial metabolic engineering has enabled the production of tailored biopolymers by harnessing living microbial factories (prokaryotes) as whole-cell biocatalysts. Microbial catalysts offer sophisticated means to develop a variety of valuable polysaccharides in bulk quantities for practical clinical applications. Glycans production through this technique is highly efficient and cost-effective, as it does not involve expensive initial materials. Metabolic glycoengineering primarily focuses on utilizing small metabolite molecules to alter biosynthetic pathways, optimization of cellular processes for glycan and glycoconjugate production, characteristic to a specific organism to produce interest tailored glycans in microbes, using preferably cheap and simple substrate. However, metabolic engineering faces one of the unique challenges, such as the need for an enzyme to catalyze desired substrate conversion when natural native substrates are already present. So, in metabolic engineering, such challenges are evaluated, and different strategies have been developed to overcome them. The generation of glycans and glycoconjugates via metabolic intermediate pathways can still be supported by glycol modeling achieved through metabolic engineering. It is evident that modern glycans engineering requires adoption of improved strain engineering strategies for creating competent glycoprotein expression platforms in bacterial hosts, in the future. These strategies include logically designing and introducing orthogonal glycosylation pathways, identifying metabolic engineering targets at the genome level, and strategically improving pathway performance (for example, through genetic modification of pathway enzymes). Here, we highlight current strategies, applications, and recent progress in metabolic engineering for producing high-value tailored glycans and their applications in biotherapeutics and diagnostics.

Neck Collar Assessment for People Living With Motor Neuron Disease: Are Current Outcome Measures Suitable?

A majority of people living with motor neuron disease (MND) experience weakness of the neck and as a result, experience head drop. This exacerbates problems with everyday activities (eating, talking, breathing, etc). Neck collars are often used to support head drop; however, these are typically designed for prehospitalization settings to manage and brace the cervical region of the spine. As a result, it has been recorded that people living with MND often reject these collars for a variety of reasons but most notably because they are too restricting. The current standardized outcome measures (most notably restricting cervical range of motion) used for neck collars are summarized herein along with whether they are suitable for a bespoke neck collar specifically designed for people living with MND.

Microbial meat: A sustainable vegan protein source produced from agri-waste to feed the world.

In the modern world, animal and plant protein may not meet the sustainability criteria due to their high need for arable land and potable water consumption, among other practices. Considering the growing population and food shortage, finding alternative protein sources for human consumption is an urgent issue that needs to be solved, especially in developing countries. In this context, microbial bioconversion of valuable materials in nutritious microbial cells represent a sustainable alternative to the food chain. Microbial protein, also known as single-cell protein (SCP), consist of algae biomass, fungi or bacteria that are currently used as food source for both humans and animals. Besides contributing as a sustainable source of protein to feed the world, producing SCP, is important to reduce waste disposal problems and production costs meeting the sustainable development goals. However, for microbial protein as feed or food to become an important and sustainable alternative, addressing the challenges of raising awareness and achieving wider public regulatory acceptance is real and must be addressed with care and convenience. In this work, we critically reviewed the potential technologies for microbial protein production, its benefits, safety, and limitations associated with its uses, and perspectives for broader large-scale implementation. We argue that the information documented in this manuscript will assist in developing microbial meat as a major protein source for the vegan world.

Oral empagliflozin-loaded tri-layer core-sheath fibers fabricated using tri-axial electrospinning: Enhanced in vitro and in vivo antidiabetic performance.

Empagliflozin (EM) was successfully loaded in polycaprolactone/poly (L-lactic acid)/polymethyl methacrylate (PCL/PLA/PMMA) fibers. In the rat ß-cell line (BRIN-BD11), the insulin expression ratio of pancreatic ß-cells was stimulated at high and low glucose by culturing with tri-layer EM-loaded fiber (EMF) for 48 h. The expression ratios of glucokinase and GLUT-2 proteins increased after EMF treatment. According to the in vitro drug release test, 97% of all drug contained in fibers was released in a controlled manner for 24 h. The pharmacokinetic test revealed that the bioavailability was improved ∼4.8-fold with EMF treatment compared to EM-powder and blood glucose level was effectively controlled for 24 h with EMF. Oral administration of EMF exhibited a better sustainable anti-diabetic activity even in the half-dosage than EM-powder in streptozotocin/nicotinamide-induced T2DM rats. The levels of GLP-1, PPAR-γ, and insulin were increased while the levels of SGLT-2 and TNF-α were decreased with EMF treatment. Also, EMF recovered the histopathological changes in the liver, pancreas, and kidney in T2DM rats and protected pancreatic ß-cells. Consequently, EMF is suggested as an unprecedented and promotive treatment approach for T2DM with a higher bioavailability and better antidiabetic effect compared to conventional dosage forms.

Production of 3D Printed Bi-Layer and Tri-Layer Sandwich Scaffolds with Polycaprolactone and Poly (vinyl alcohol)-Metformin towards Diabetic Wound Healing.

Type 2 diabetes mellitus (T2DM) is a chronic disease characterized by impaired insulin secretion, sensitivity, and hyperglycemia. Diabetic wounds are one of the significant complications of T2DM owing to its difficulty in normal healing, resulting in chronic wounds. In the present work, PCL/PVA, PCL/PVA/PCL, and metformin-loaded, PCL/PVA-Met and PCL/PVA-Met/PCL hybrid scaffolds with different designs were fabricated using 3D printing. The porosity and morphological analysis of 3D-printed scaffolds were performed using scanning electron microscopy (SEM). The scaffolds' average pore sizes were between 63.6 ± 4.0 and 112.9 ± 3.0 µm. Molecular and chemical interactions between polymers and the drug were investigated with Fourier transform infrared spectroscopy (FT-IR) and X-ray diffraction (XRD). Mechanical, thermal, and degradation analysis of the scaffolds were undertaken to investigate the physico-chemical characteristics of the scaffolds. Owing to the structure, PCL/PVA/PCL sandwich scaffolds had lower degradation rates than the bi-layer scaffolds. The drug release of the metformin-loaded scaffolds was evaluated with UV spectrometry, and the biocompatibility of the scaffolds on fibroblast cells was determined by cell culture analysis. The drug release in the PCL/PVA-Met scaffold was sustained till six days, whereas in the PCL/PVA-Met/PCL, it continued for 31 days. In the study of drug release kinetics, PCL/PVA-Met and PCL/PVA-Met/PCL scaffolds showed the highest correlation coefficients (R2) values for the first-order release model at 0.8735 and 0.889, respectively. Since the layered structures in the literature are mainly obtained with the electrospun fiber structures, these biocompatible sandwich scaffolds, produced for the first time with 3D-printing technology, may offer an alternative to existing drug delivery systems and may be a promising candidate for enhancing diabetic wound healing.

Biofabrication of the osteochondral unit and its applications: Current and future directions for 3D bioprinting.

Multiple prevalent diseases, such as osteoarthritis (OA), for which there is no cure or full understanding, affect the osteochondral unit; a complex interface tissue whose architecture, mechanical nature and physiological characteristics are still yet to be successfully reproduced in vitro. Although there have been multiple tissue engineering-based approaches to recapitulate the three dimensional (3D) structural complexity of the osteochondral unit, there are various aspects that still need to be improved. This review presents the different pre-requisites necessary to develop a human osteochondral unit construct and focuses on 3D bioprinting as a promising manufacturing technique. Examples of 3D bioprinted osteochondral tissues are reviewed, focusing on the most used bioinks, chosen cell types and growth factors. Further information regarding the applications of these 3D bioprinted tissues in the fields of disease modelling, drug testing and implantation is presented. Finally, special attention is given to the limitations that currently hold back these 3D bioprinted tissues from being used as models to investigate diseases such as OA. Information regarding improvements needed in bioink development, bioreactor use, vascularisation and inclusion of additional tissues to further complete an OA disease model, are presented. Overall, this review gives an overview of the evolution in 3D bioprinting of the osteochondral unit and its applications, as well as further illustrating limitations and improvements that could be performed explicitly for disease modelling.

Digital workflow for fabrication of bespoke facemask in burn rehabilitation with smartphone 3D scanner and desktop 3D printing: clinical case study.

We present a digital workflow for the production of custom facial orthosis used for burn scar management using smartphone three-dimensional (3D) scanner and desktop 3D printing. 3D facial scan of a 48-year-old lady with facial burn scars was obtained. 3D modeling with open-source programs were used to create facemask then 3D printed using rigid polylactic acid (PLA) filament and semi-rigid thermoplastic polyurethane (TPU). Conventional facemask was used as a control. Each mask was worn for 7 days. Primary outcomes were level of comfort, and adherence to treatment. The conventional facemask was the most convenient followed by the TPU-facemask (mean comfort score of 9/10 and 8.7/10, respectively). Patient's compliance was high for both TPU and conventional masks, each was worn for at least 21 hours/day for 7 days. On the contrary, PLA-facemask was not well tolerated. The proposed digital workflow is simple, patient-friendly and can be adopted for resource-intensive healthcare.

Three-Dimensional Engineered Peripheral Nerve: Toward a New Era of Patient-Specific Nerve Repair Solutions.

Reconstruction of peripheral nerve injuries (PNIs) with substance loss remains challenging because of limited treatment solutions and unsatisfactory patient outcomes. Currently, nerve autografting is the first-line management choice for bridging critical-sized nerve defects. The procedure, however, is often complicated by donor site morbidity and paucity of nerve tissue, raising a quest for better alternatives. The application of other treatment surrogates, such as nerve guides, remains questionable, and it is inefficient in irreducible nerve gaps. More importantly, these strategies lack customization for personalized patient therapy, which is a significant drawback of these nerve repair options. This negatively impacts the fascicle-to-fascicle regeneration process, critical to restoring the physiological axonal pathway of the disrupted nerve. Recently, the use of additive manufacturing (AM) technologies has offered major advancements to the bioengineering solutions for PNI therapy. These techniques aim at reinstating the native nerve fascicle pathway using biomimetic approaches, thereby augmenting end-organ innervation. AM-based approaches, such as three-dimensional (3D) bioprinting, are capable of biofabricating 3D-engineered nerve graft scaffolds in a patient-specific manner with high precision. Moreover, realistic in vitro models of peripheral nerve tissues that represent the physiologically and functionally relevant environment of human organs could also be developed. However, the technology is still nascent and faces major translational hurdles. In this review, we spotlighted the clinical burden of PNIs and most up-to-date treatment to address nerve gaps. Next, a summarized illustration of the nerve ultrastructure that guides research solutions is discussed. This is followed by a contrast of the existing bioengineering strategies used to repair peripheral nerve discontinuities. In addition, we elaborated on the most recent advances in 3D printing and biofabrication applications in peripheral nerve modeling and engineering. Finally, the major challenges that limit the evolution of the field along with their possible solutions are also critically analyzed. Impact statement Complex nerve injuries, including critical-sized gaps (>3 cm loss of substance), gaps involving nerve bifurcations, and those associated with ischemic environments, are difficult to manage. A biomimetic, personalized peripheral nerve tissue surrogate to address these injuries is lacking. The peripheral nerve repair market currently represents a multi-billion-dollar industry that is projected to expand. Given the clinical and economical dilemmas posed by this medical condition, it is crucial to devise novel and effective nerve substitutes. In this review article, we discuss progress in three-dimensional printing technologies, including biofabrication and nerve computer-aided design modeling, toward achieving a patient-specific and biomimetic nerve repair solution.

Accuracy of Pedicle Screw Placement Methods in Pediatrics and Adolescents Spinal Surgery: A Systematic Review and Meta-Analysis.

STUDY DESIGN: Systematic review and meta-analysis. OBJECTIVE: Various methods of pedicle screw (PS) placement in spinal fusion surgery existed, which can be grouped into conventional freehand (FH), modified freehand (MF), and image-guided methods (including fluoroscopy-based navigation (FL), computed tomography-based navigation (CT-nav), robot-assisted (RA), and ultrasound-guided (UG)). However, the literature showed mixed findings regarding their accuracy and complications. This review aimed to discover which method of PS placement has the highest accuracy and lowest complication rate in pediatric and adolescent spinal fusion surgery. METHODS: A comprehensive search in MEDLINE (PubMed), EMBASE (OVID), CENTRAL, and Web of Science was conducted until May 2020 by 2 independent reviewers, followed by bias assessment with ROB 2 and ROBINS-I tools and quantification with meta-analysis. Overall evidence quality was determined with GRADE tool. RESULTS: Four RCTs and 2 quasi-RCTs/CCTs comprising 3,830 PS placed in 291 patients (4-22 years old) were analyzed. The lowest accuracy was found in FH (78.35%) while the highest accuracy was found in MF (95.86%). MF was more accurate than FH (OR 3.34 (95% CI, 2.33-4.79), P < .00 001, I2 = 0%). Three-dimensional printed drill template (as part of MF) was more accurate than FH (OR 3.10 (95% CI, 1.98-4.86), P < .00 001, I2 = 14%). Overall, complications occurred in 5.84% of the patients with 0.34% revision rate. Complication events in MF was lower compared to FH (OR 0.47 (95% CI, 0.10-2.15), P = .33, I2 = 0%). CONCLUSIONS: Meta-analysis shows that MF is more accurate than FH in pediatric and adolescent requiring PS placement for spinal fusion surgery.

Design and In Vivo Testing of Novel Single-Stage Tendon Graft Using Polyurethane Nanocomposite Polymer for Tendon Reconstruction.

Severe trauma, failure of prior surgical repair, delayed presentation and excessive scarring around the flexor tendon bed often necessitate a two-stage surgical reconstruction, where a silicone spacer is used in the first stage to recreate the fibro-osseous tunnel through which the tendon graft can glide in the second stage. This staged procedure involves great commitment on the part of both patient and surgeon, over the course of several months, involving a prolonged period of rehabilitation that can be quite disruptive to the patient's life and work. Reducing this from a two-stage into a single-stage procedure, therefore, has the potential to reduce rehabilitation time and cost, expedite return to work, and improve outcomes. To address this, we developed polyurethane (PU) nanocomposite, as an engineered tendon sheath, for treatment of delayed flexor tendon division as a single-stage procedure. The clinically conformant tubular grafts were tested for their efficacy in the peroneus tertius tendon of 6 Mule sheep for 3 months. Semi-quantitative histological assessment was carried out by analysing four descriptive layers: tendon, tendon/polymer sheath interface, polymer sheath, and polymer sheath/surrounding tissue. Four (out of 6) of the implanted PU nanocomposites showed moderate to substantial healing of the injured tendons, with minimal adhesion after repair, ensuring good gliding movement. No statistical differences were observed in tendon repair based on intra-regional variation in the explanted grafts, indicating homogeneity in tendon repair. Overall, the PU nanocomposite bears morphological stability and functionality for tendon repair, in single-stage surgical reconstruction, demonstrating promising evidence for clinical translation.

Effect of Demineralized Bone Matrix, Bone Marrow Mesenchymal Stromal Cells, and Platelet-Rich Plasma on Bone Tunnel Healing After Anterior Cruciate Ligament Reconstruction: A Comparative Micro-Computed Tomography Study in a Tendon Allograft Sheep Model.

BACKGROUND: The effect of demineralized bone matrix (DBM), bone marrow-derived mesenchymal stromal cells (BMSCs), and platelet-rich plasma (PRP) on bone tunnel healing in anterior cruciate ligament reconstruction (ACLR) has not been comparatively assessed. HYPOTHESIS: These orthobiologics would reduce tunnel widening, and the effects on tunnel diameter would be correlated with tunnel wall sclerosis. STUDY DESIGN: Controlled laboratory study. METHODS: A total of 20 sheep underwent unilateral ACLR using tendon allograft and outside-in interference screw fixation. The animals were randomized into 4 groups (n = 5 per group): Group 1 received 4mL of DBM paste, group 2 received 10 million BMSCs in fibrin sealant, group 3 received 12 mL of activated leukocyte-poor platelet-rich plasma, and group 4 (control) received no treatment. The sheep were euthanized after 12 weeks, and micro-computed tomography scans were performed. The femoral and tibial tunnels were divided into thirds (aperture, midportion, and exit), and the trabecular bone structure, bone mineral density (BMD), and tunnel diameter were measured. Tunnel sclerosis was defined by a higher bone volume in a 250-µm volume of interest compared with a 4-mm volume of interest surrounding the tunnel. RESULTS: Compared with the controls, the DBM group had a significantly higher bone volume fraction (bone volume/total volume [BV/TV]) (52.7% vs 31.8%; P = .020) and BMD (0.55 vs 0.47 g/cm3; P = .008) at the femoral aperture and significantly higher BV/TV at femoral midportion (44.2% vs 32.9%; P = .038). There were no significant differences between the PRP and BMSC groups versus controls in terms of trabecular bone analysis or BMD. In the controls, widening at the femoral tunnel aperture was significantly greater than at the midportion (46.7 vs 41.7 mm2; P = .034). Sclerosis of the tunnel was common and most often seen at the femoral aperture. In the midportion of the femoral tunnel, BV/TV (r = 0.52; P = .019) and trabecular number (r S = 0.50; P = .024) were positively correlated with tunnel widening. CONCLUSION: Only DBM led to a significant increase in bone volume, which was seen in the femoral tunnel aperture and midportion. No treatment significantly reduced bone tunnel widening. Tunnel sclerosis in the femoral tunnel midportion was correlated significantly with tunnel widening. CLINICAL RELEVANCE: DBM might have potential clinical use to enhance healing in the femoral tunnel after ACLR.