New approach to soil management focusing on soil health and air quality: one earth one life (critical review).

Soil plays a key role in ecosphere and air quality regulation. Obsolete environmental technologies lead to soil quality loss, air, water, and land systems pollution. Pedosphere and plants are intertwined with the air quality. Ionized O2 is capable to intensify atmosphere turbulence, providing particulate matter (PM2.5) coalescence and dry deposition. Addressing environmental quality, a Biogeosystem Technique (BGT*) heuristic transcendental (nonstandard and not direct imitation of nature) methodology has been developed. A BGT* main focus is an enrichment of Earth's biogeochemical cycles through land use and air cleaning. An intra-soil processing, which provides the soil multilevel architecture, is one of the BGT* ingredients. A next BGT* implementation is intra-soil pulse continuously discrete watering for optimal soil water regime and freshwater saving up to 10-20 times. The BGT* comprises intra-soil dispersed environmentally safe recycling of the PM sediments, heavy metals (HMs) and other pollutants, controlling biofilm-mediated microbial community interactions in the soil. This provides abundant biogeochemical cycle formation and better functioning of the humic substances, biological preparation, and microbial biofilms as a soil-biological starter, ensuring priority plants and trees nutrition, growth and resistance to phytopathogens. A higher underground and aboveground soil biological product increases a reversible C biological sequestration from the atmosphere. An additional light O2 ions photosynthetic production ensures a PM2.5 and PM0.1 coalescence and strengthens an intra-soil transformation of PM sediments into nutrients and improves atmosphere quality. The BGT* provides PM and HMs intra-soil passivation, increases soil biological productivity, stabilizes a climate system of the earth and promotes a green circular economy.

Biogenic Synthesis of Fluorescent Carbon Dots (CDs) and Their Application in Bioimaging of Agricultural Crops.

Fluorescent nanoparticles have a transformative potential for advanced sensors and devices for point-of-need diagnostics and bioimaging, bypassing the technical burden of meeting the assay performance requirements. Carbon dots (CDs) are rapidly emerging carbon-based nanomaterials. Regardless of their fate, they will find increasing applications. In this study, a simple approach for synthesizing CDs from fruit peels was developed. The CDs were fabricated from Annona squamosa (L.) peels using a carbonization technique through microwave-assisted hydrothermal digestion at temperatures around 200 °C. Synthesized CDs were detected using a UV transilluminator for the preliminary confirmation of the presence of fluorescence. UV-Vis spectrophotometry (absorbance at 505 nm) analysis, zeta potential measurement (-20.8 mV), nanoparticles tracking analysis (NTA) (average size: 15.4 nm and mode size: 9.26 nm), photoluminescence, and Fourier transform infrared (FT-IR) analysis were used to identify the capping functional groups on the CDs. The total quantum yield exhibited was 8.93%, and the field emission scanning electron microscopy (FESEM) showed the size range up to 40 nm. The germinating mung bean (Vigna radiata (L.)) seeds were incubated with biogenically synthesized CDs to check the absorption of CDs by them. The fluorescence was observed under a UV-transilluminator in the growing parts of seeds, indicating the absorption of CDs during the germination, development, and growth. These fluorescent CDs could be used as a bioimaging agent. This novel method of synthesizing CDs was found to be eco-friendly, rapid, and cost-effective.

Microplastic Pollution: An Emerging Threat to Terrestrial Plants and Insights into Its Remediation Strategies.

Microplastics (MPs) are ubiquitous and constitute a global hazard to the environment because of their robustness, resilience, and long-term presence in the ecosystem. For now, the majority of research has primarily focused on marine and freshwater ecosystems, with just a small amount of attention towards the terrestrial ecosystems. Although terrestrial ecosystems are recognized as the origins and routes for MPs to reach the sea, there is a paucity of knowledge about these ecological compartments, which is necessary for conducting effective ecological risk assessments. Moreover, because of their high persistence and widespread usage in agriculture, agribusiness, and allied sectors, the presence of MPs in arable soils is undoubtedly an undeniable and severe concern. Consequently, in the recent decade, the potential risk of MPs in food production, as well as their impact on plant growth and development, has received a great deal of interest. Thus, a thorough understanding of the fate and risks MPs, as well as prospective removal procedures for safe and viable agricultural operations in real-world circumstances, are urgently needed. Therefore, the current review is proposed to highlight the potential sources and interactions of MPs with agroecosystems and plants, along with their remediation strategies.

Intra-soil waste recycling provides safety of environment.

Amelioration and remediation technology was developed for phosphogypsum utilization in Haplic Chernozem of South-European facies (Rostov Region). The technology comprises phosphogypsum dispersed application into the soil layer of 20-45 cm during intra-soil milling. In the model experiment, the phosphogypsum doses 0 (control), 10, 20, and 40 t ha-1 were studied. The Cd thermodynamic forms in soil solution were calculated via the developed mathematical chemical-thermodynamic model and program ION-3. The form of ion in soil solution (or water extract) was considered accounting the calcium-carbonate equilibrium (CCE) and association of ion pairs CaCO30; CaSO40, MgCO30, MgSO40, CaHCO3+, MgHCO3+, NaCO3-, NaSO4-, CaOH+, MgOH+. For calculation of the equilibrium of microelements concentration in soil solution ion including heavy metals (HMs), the coefficient of microelement association kas was proposed. According to calculations, Cd2+ ion in soil solution was mostly bounded to associates CdOH+, partly to associates CdCO30 and CdHCO3+. The calculated kas of Cd was 1.24 units in the control option of experiment and decreased to 0.95 units at phosphogypsum dose 40 t ha-1. The ratio of "active [Cd2+] to total Cd" reduced from 33.5% in control option to 28.0% in the option of phosphogypsum dose 40 t ha-1. The biogeochemical barrier for penetration of HMs from soil to plant roots was high after application of phosphogypsum. According to calculation by ION-3, the standard soil environmental limitations overestimate the toxicity of Cd in soil solution. New decision for intra-soil milling and simultaneous application of phosphogypsum was developed to provide the environmentally safe waste recycling.

Thermodynamic mathematical model of the Kastanozem complex and new principles of sustainable semiarid protective silviculture management.

The Kastanozem complex in the dry steppe of southern Russia underlies an artificially-constructed forest strips. Deep ploughing to a depth of 45 cm was used to process the soil prior to planting. Between 20 and 40 cm depth, soil density was high, 1.57 t m-3. Soil hardness was also high, 440 psi. Soil aggregates greater than 5 cm in size were impermeable to tree roots. The content of such aggregates was high, comprising 35%. The number of tree roots with diameters greater than 0.5 cm that cross the soil profile was as low as 0.15 to 0.3 pcs cm-2. The soil matric potential signifying water availability was low in the vegetation period -0.9 MPa to a depth of 1.0 m. According to modelling experiments, the main salt components in the soil solution drive the transfer of soil organic matter (SOM) and heavy metals (HM). The composition of the soil solution determined by the calcium carbonate equilibrium (CCE) and the association and complexation of ions. ION-3 software was used to calculate the ion equilibrium in the soil solution. Macro-ions Cа2+, Mg2+, SO42-, and CO32- partly bonded as ion pairs. Oversaturation of the soil solution with CaCO3 was calculated according to the analytical content of macro-ion, which was high up to 1000 units, and its value decreased in response to ionic strength, activity, association, complexation, and thermodynamic equilibrium of macro-ions in the soil solution. Oversaturation calculated for Salic Solonetz and Gleyic Solonetz soil solutions was small considering the SOM content. Calculations indicate the profile and lateral loss of C from the soil to the vadose zone. The content of Pb in the soil solution was calculated sirca 75%-80%. The calculated coefficient of Pb2+ association was as high as 52.0. The probability of Pb passivation by SOM in the Kastanozem complex was significant. The probability of uncontrolled transfer and accumulation of HM in the soil and vadose zone was high. Biogeosystem Technique (BGT*) transcendental methodology, an innovative methodology created for stable geomorphological system formation to achieve sustainable agriculture and silviculture, was applied. The BGT* elements were: intra-soil milling of the 30-60 cm soil layer for geophysical conditioning; intra-soil continuously-discrete pulse watering for plants and trees to improve the hydrologic regime. The BGT* methodology reduced HM mobility, controlled biodegradation, enriched nutrient biogeochemical cycling, increased C content, increased soil productivity, and reversible carbon sequester in biological form.

Comparison of Heavy Metal Content in Artemisia austriaca in Various Impact Zones.

A study on Artemisia austriaca of two anthropogenically heavy metal-polluted impact zones of the Rostov region, namely Lake Atamanskoye and Novocherkasskaya Power Station, was conducted. The influence of soil pollution on the Pb, Zn, and Cu accumulation in various organs of A. austriaca, which is widespread in the studied territories, was established. An extremely high level of Zn content (3051 mg/kg) was observed in the soils of the impact zone of Lake Atamanskoe, as well as an excess over the maximum permissible level for Pb and Cu (32 and 132 mg/kg accordingly). The distribution coefficient (DC) of heavy metal translocation showed the highest mobility of Zn (DC ≥ 1 in 9 out of 11 sites) and the smallest of Pb (DC ≥ 1 in 4 out of 11 sites) in plants of the Novocherkasskaya Power Station impact zone. The zone of increased pollution around Lake Atamanskoye was 1.5 km, which was much smaller than the Novocherkasskaya Power Station zone of high pollution (5 km). However, vehicle emissions accumulated in the soil over the past decades had a greater effect on the Pb translocation than atmospheric emissions of the enterprise.

Chemical Soil-Biological Engineering Theoretical Foundations, Technical Means, and Technology for Safe Intrasoil Waste Recycling and Long-Term Higher Soil Productivity.

The amelioration and remediation technology was developed on the basis of research of phosphogypsum and utilization in the Haplic Chernozem of South-European facies (Rostov Region). Phosphogypsum was utilized via dispersed application into a soil layer of 20-45 cm with intrasoil milling of this layer. The phosphogypsum utilization doses were 0, 10, 20, and 40 t ha-1. The Pb analytical content in soil solution was studied in the model experiment. The soil solution Pb thermodynamic forms were calculated. The mathematical chemical-thermodynamic model ION-2 was developed to calculate the real soil solution (water extract) calcium-carbonate equilibrium (CCE) ion forms, considering the ion pair association. The associated ion pairs CaCO3 0, CaSO4 0, MgCO3 0, MgSO4 0, CaHCO3 +, MgHCO3 +, NaCO3 -, NaSO4 -, CaOH+, and MgOH+ were accounted for in soil solution equilibrium macroion form calculation. The procedure for the microelement ion [including heavy metals (HMs)] equilibrium concentration in the soil solution coefficient k as calculation was proposed to account for the real soil solution CCE, macroions, and HM (including Pb) association. The Pb2+ ion in soil solution was mostly bound to associates PbOH+, Pb(OH)2 0, PbCO3 0, Pb(CO3)2 2-, and PbHCO3 +. The calculation of CCE and ion association in soil solution revealed 14.5-21.5 times HM passivation compared to HM water-soluble values. The calculated HM activity in the soil solution in the example of the Pb2+ ion was less than 4% after phosphogypsum application in the target amelioration layer of 20-45 cm. The studied phosphogypsum doses were substantiated as environmentally safe. This was because the real soil solution CCE provided HM ion form association and consequent passivation. The dry steppe soil remediation after phosphogypsum application was justified as highly probable. The intrasoil milling chemical soil-biological engineering technology was developed for simultaneous soil amelioration and remediation on the basis of the biogeosystem technique (BGT*) transcendental methodology. The BGT*-based technology was tested in the long-term field experiments and is capable of ensuring the priority geophysical micro- and macroaggregate structure via intrasoil milling and mixing of soil illuvial and transitional horizons. This helps synthesize soil multilevel architecture, providing intrasoil-dispersed environmentally safe recycling of wastes of different origin. Addressing the environment safety concerns, a new decision of the intrasoil milling device was proposed for phosphogypsum and other substance application to soil.

Production and Use of Selenium Nanoparticles as Fertilizers.

The synergy problem was discussed linking Se nanoparticles and different soil fertility agents. Se zero-valent-state nanoparticles were investigated as fertilizers and antioxidants. A technology was proposed for producing Se zero-valent-state nanoparticles. Se nanoparticles were obtained by laser ablation of Se in water using a fiber ytterbium laser, with a wavelength between 1060 and 1070 nm, a pulse repetition rate of 20 kHz, a pulse duration of 80 ns, and an average power of 20 W, and a copper vapor laser with wavelengths of 510.6 and 578.2 nm and an average power of 8 W. The main particle mass part shifted from 800 nm to a size less than 100 nm, corresponding to the increase in the laser fragmentation time. The resulting nanoparticles were monodisperse in size and mass. The Se nanoparticle water suspension was introduced into the soil. The soil Se nanoparticle concentrations were about 1, 5, 10, and 25 µg kg-1. An experiment was carried out in a climate chamber in two series: (1) growing plants in soil imitating the standard organogenesis environment conditions such as illumination of 16 h per day, temperature of 22 °C, soil humidity of 25% SDW, and an experiment duration of 30 days and (2) growing plants in soil under changing environmental conditions of organogenesis. The standard environmental conditions for the first 10 days are illumination of 16 h day-1, temperature of 22 °C, and soil humidity of 25% SDW. The plant stress for 5 days is hyperthermia of 40 °C. The standard environmental conditions for the next 15 days are illumination of 16 h day-1, temperature of 22 °C, and soil humidity of 25% SDW. At standard organogenesis, the plant leaf plate surface area was 30 ± 2 cm2 in the control option, and the Se nanoparticle doses were correspondingly 1 µg kg-1 for 32 ± 3 cm2, 5 µg kg-1 for 37 ± 2 cm2, 10 µg kg-1 for 38 ± 3 cm2, and 25 µg kg-1 for 28 ± 4 cm2. Hyperthermia stressed plant growth was studied. The highest plant growth rate was in Se nanoparticle concentrations of 5 and 10 µg kg-1. The eggplant growth on the soil with the Se nanoparticle addition at a concentration of 10 µg kg-1 of leaf plate surface area was twice compared to the eggplant growth in untreated soil. The same was for tomato plants. The leaf plate surface area of the cucumber plant grown using Se nanoparticles was 50% higher compared to the control option. The Biogeosystem technique methodology of 20-45 cm soil-layer intrasoil milling for soil multilevel aggregate system formation and intrasoil pulse continuous-discrete watering for soil water regime control was proposed for the Se nanoparticles for better function in the real soil, providing a synergy effect of soil mechanical processing, nanoparticles, humic substances, and polymicrobial biofilms on soil fertility.

Identification of Organic Matter Dispersions Based on Light Scattering Matrices Focusing on Soil Organic Matter Management.

The origin of organic matter, its spread, scattering, and functioning are influenced by the physical structure of liquid or dispersed media of organic matter. Refractive indices of fodder yeast grown on paraffin oil (paprin) and natural gas (gaprin) as well as Lycoperdon spore and organelles were measured by laser phase microscopy. The scattering matrices of aqueous suspensions of paprin, gaprin, and Lycoperdon spores were measured using a laser polarimeter with the scattering angle ranging from 20 to 150°. The experimentally measured scattering matrices have been approximated by the weighted sum of theoretically calculated scattering matrices using the T-matrix code developed by Mishchenko. Most of the particle radii in the filtered fraction of paprin and gaprin were within the range of about 0.05-0.12 µm. Particle radii of the Lycoperdon spore suspension were within the range of 0.4-2.4 µm, which corresponded to both whole spores and their separate organelles. A possibility of identifying a suspension by its scattering matrices was shown for a small difference in the real parts of the refractive index in the example of paprin and gaprin. The measurements of the light scattering matrix showed that for a small size parameter of about 1, the identification of paprin and gaprin can be based only on a difference in the particle shape. Refractive index difference is manifested for the size parameter values higher than 3. An example of a suspension consisting of micron-sized spores and their submicron organelles shows high sensitivity of the scattering matrix to the composition of the dispersed material. The presented data and models help to extrapolate the results of the light scattering matrix study to a vast spectrum of media of organic matter origin and functioning. This study focused on the Biogeosystem Technique (BGT*) transcendental methodology to manage soil as an arena of biodegradation and organic synthesis. A BGT*-based robotic system for intra-soil pulse continuous-discrete water and matter supply directly into the dispersed-aggregated physical structure of the soil media was developed. The system enables transformation of soil into a stable highly productive organic chemical bioreactor for better controlled nanoparticle biomolecular interactions and adsorption by biological and mineral media. The scattering matrix measurement unit is supposed to be used in the robotic system as a diagnostic tool for the dispersion composition of soil organic components.