ABSTRACT
In this research, we improved densification, hardness, and compression strength of synthetic hydroxyapatite (HAp) ceramics by introducing small quantities of MgO-CaO-P(2)O(5)-Na(2)O-based sintering additives. Biological properties of HAp were not altered by this procedure. Phase analyses were performed by using a Philips Xpert fully automated diffractometer with Co K-alpha radiation to understand the influence of additives on phase purity in the final products. All compositions were characterized at green and sintered densities to understand the influence of additives on densification. Some of the compositions showed >40% increase in Vickers microhardness compared with pure HAp processed under the same conditions. Improvement in compression strength was also detected in some compositions. In vitro biological testing used a modified human osteoblast cell line to test biocompatibility, cell attachment, and cell proliferation. All these compositions were nontoxic and biocompatible. Our results indicate that MgO-CaO-P(2)O(5)-Na(2)O-based sintering additives can be used to improve both mechanical and biological properties of HAp ceramics.
Subject(s)
Calcium Compounds/chemistry , Hydroxyapatites/chemistry , Magnesium Oxide/chemistry , Oxides/chemistry , Potassium Compounds/chemistry , Sodium Compounds/chemistry , Biocompatible Materials/chemistry , Biocompatible Materials/metabolism , Cell Line , Ceramics/chemistry , Ceramics/metabolism , Compressive Strength , Hardness , Humans , Hydroxyapatites/metabolism , Materials Testing , Mechanics , Osteoblasts/cytology , Osteoblasts/physiology , Tensile Strength , X-Ray DiffractionABSTRACT
We have assessed the effect of CaO--P2O5--Na2O-based sintering additives on mechanical and biological properties of hydroxyapatite (HAp) ceramics. Five different compositions of sintering additives were selected and prepared by mixing of CaO, P2O5, and Na2CO3 powders. 2.5 wt% of each additive was combined with commercial HAp powder, separately, followed by ball milling, and sintering at 1250 degrees C and 1300 degrees C in a muffle furnace. Green and sintered densities of the compacts were analyzed for the influence of additives on densification of HAp. Phase analyses were carried out using an X-ray diffractometer. Vickers microhardness testing was used to evaluate hardness of sintered compacts of different compositions. A maximum microhardness of 4.6 (+/- 0.28) GPa was attained for a composition with 2.5 wt% addition of CaO:P2O5:Na2O in the ratio of 3:3:4. Results from mechanical property evaluation showed that some of these sintering additives improved failure strength of HAp under compressive loading. Maximum compressive strength was observed for samples with 2.5 wt% addition of CaO. Average failure strength for this set of samples was calculated to be 220 (+/- 50) MPa. Cytotoxicity, and cell attachment studies were carried out using a modified human osteoblast cell line called OPC-1. In vitro results showed that these compositions were non-toxic. Some sintering aids enhanced cell attachment and proliferation, which was revealed from SEM examination of the scaffolds seeded with OPC-1 cells.
