Effect of a Nanocellulose Addition on the Mechanical Properties of Paper.

Nowadays, the emphasis is on increasing the durability of all products. For this reason, it is also advisable to look into extending the durability of paper products. The main reason for using flax pulp is that flax and cotton pulp are widely used for the production of banknotes due to their higher strength. This paper deals with flax pulp with the addition of nanocellulose, which should further enhance the mechanical properties of the pulp. The tensile strength, breaking length, and tensile energy absorption index were evaluated as the key mechanical properties. At the same time, the effect of the addition of nanocellulose, whether it was added to the pulp mass or applied to the later produced paper as a spray or coating, was tested in comparison to paper without the addition of nanocellulose. The best mechanical properties, i.e., tensile strength, were achieved for the highest addition of 5% of nanocellulose into the pulp, at 24.3 Nm∙g-1, and for the coating application, at 28.7 Nm∙g-1, compared to the flax pulp without the addition, where the tensile strength was 20.5 Nm∙g-1. The results of this research are used for the assessment of nanocellulose as a natural compatible additive to enhance the strength properties of cellulose-based materials.

Nitrate-Alkaline Pulp from Non-Wood Plants.

Because there is a lack of wood resources in many countries, this work focused on pulp and paper production from the waste and agricultural residues of non-wood plants. The work aimed to pulp the nitrate-alkaline of black mustard (Brassica Nigra L.) and camelina (Camelina Sativa L.). The black mustard and the camelina were selected due to the expanding planted areas of these crops in the Czech Republic. To characterize the chemical composition of black mustard and camelina, cellulose, lignin, ash, and extractives were determined. Raw alpha-cellulose, beta-cellulose, and gamma-cellulose were also measured. The results showed that the content of lignin in non-wood plants is lower than that in softwoods. The cooked pulp was characterized by the delignification degree-Kappa number. Additionally, handsheet papers were made for selected samples of pulp. The handsheet papers were characterized by tensile index, breaking length, and smoothness and compared with commonly available papers.

Dead-space washout by split-flow ventilation. A new method to reduce ventilation needs in premature infants.

OBJECTIVE: Chronic lung disease caused by volutrauma is one of the most important consequences of preterm delivery. In this pilot study a new method is presented that consists of flushing part of the dead space with fresh gas in order to reduce high tidal volumes, the chief cause of volutrauma. The aim of the study was to evaluate if the new method could reduce ventilatory effort in preterm infants by diminishing dead space. DESIGN AND SETTING: In split-flow ventilation, gas required for dead-space washout is split off from the regular ventilation circuit. The split flow bypasses the apparatus dead space and fills it retrogradely with fresh breathing gas, mainly in the pause between exhalation and inspiration. The mean per-minute ventilation and ventilation index after 12 h of conventional ventilation were compared with corresponding mean values after 12 h of split-flow ventilation in 17 preterm infants weighing <2,000 g. Statistical analysis was performed using the T -test for matched pairs. RESULTS: After switching from conventional ventilation to split-flow ventilation, the mean per-minute ventilation per kilogram of body weight decreased significantly from a mean value of 0.314+/-0.097 l/kg/min to 0.190+/-0.043 l/kg/min ( p <0.001), while the ventilation index decreased significantly from 28.47+/-7.48 to 16.10+/-4.13 ( p <0.001). CONCLUSION: Split-flow ventilation significantly reduces apparatus dead space during ventilation in preterm infants. This leads to reduced ventilatory effort.

Reoxygenation with 100 or 21% oxygen after cerebral hypoxemia-ischemia-hypercapnia in newborn piglets.

We tested if reoxygenation with 100% O(2) was superior to 21% O(2) after combined cerebral hypoxemia-ischemia-hypercapnia (HIH) in newborn piglets. Twenty-eight piglets were randomized to reoxygenation with 100 or 21% O(2) following asphyxia. Asphyxia was induced by ventilation with 8% O(2), adding CO(2), and temporary occlusion of both common carotid arteries. After 20 min, reoxygenation-reperfusion was started with 21% O(2) (HIH 21% group, n = 13) or 100% O(2) (HIH 100% group, n = 11) for 30 min followed by 21% O(2). All piglets were observed for 2 h. We measured mean arterial blood pressure (MABP), changes in microcirculation in the cerebral cortex (laser Doppler), and extracellular concentrations of hypoxanthine in the cortex and amino acids in the striatum (microdialysis). We found significantly higher MABP and better restoration of microcirculation after reoxygenation with 100% compared with 21% O(2), but no differences in biochemical markers were found between the groups. This indicates that the brain tolerated reoxygenation with 21% as well as with 100% O(2) in the present model of experimental asphyxia in spite of the differences in MABP and cerebral microcirculation.