ABSTRACT
This study investigated the innovative use of magnetoelastic sensors to detect the formation of single cracks in cement beams under bending vibrations. The detection method involved monitoring changes in the bending mode spectrum when a crack was introduced. The sensors, functioning as strain sensors, were placed on the beams, and their signals were detected non-invasively using a nearby detection coil. The beams were simply supported, and mechanical impulse excitation was applied. The recorded spectra displayed three distinct peaks representing different bending modes. The sensitivity for crack detection was determined to be a 24% change in the sensing signal for every 1% decrease in beam volume due to the crack. Factors influencing the spectra were investigated, including pre-annealing of the sensors, which improved the detection signal. The choice of beam support material was also explored, revealing that steel yielded better results than wood. Overall, the experiments demonstrated that magnetoelastic sensors enabled the detection of small cracks and provided qualitative information about their location.
Subject(s)
Cytoskeleton , Vibration , Physical Therapy Modalities , Records , SteelABSTRACT
Clays and muds have been used for centuries as cosmetics or pharmaceutical products for various therapies. The suitability of muds and clays for health- and beauty-related applications depends on their physicochemical properties, mineralogical composition, particle characteristics and toxicity. In this work, the physicochemical characterization of 12 mud specimens from different natural spa resorts in Greece and one from Israel (Dead Sea) is presented. All specimens were sterilized at 121 °C for 20 min, because of their intended use. The Greek mud specimens were collected from various locations in Macedonia, Western Greece and Northeast Aegean. All muds were characterized concerning their mineralogical, chemical components as well as their morphological characteristics using appropriate methods [powder X-ray diffraction (XRD), thermogravimetric analysis (TGA), nitrogen absorption specific surface area measurements (BET), scanning electron microscopy and energy dispersive X-ray spectroscopy]. The concentrations of F-, Cl-, NO3- and SO42- anions at equilibrium with the mud specimens were measured by ion chromatography. Total calcium concentration was measured using atomic absorption spectroscopy, and the concentration of total N, C, H and S in the solids was measured using elemental analysis. Moreover, total phenolic concentration (TPC) in distilled water equilibrated with the mud specimens was measured as an index for their antioxidant properties. Several muds were found to present high TPC. Several of the examined mud specimens were found to have the potential use as pharmaceuticals or cosmetics. Based on the physicochemical characteristics of the mud specimens examined, possible improvement in their use and applicability has been suggested.
