Interface and Morphology Engineered Amorphous Si for Ultrafast Electrochemical Lithium Storage.

Ultrafast high-capacity lithium-ion batteries are extremely desirable for portable electronic devices, where Si is the most promising alternative to the conventional graphite anode due to its very high theoretical capacity. However, the low electronic conductivity and poor Li-diffusivity limit its rate capability. Moreover, high volume expansion/contraction upon Li-intake/uptake causes severe pulverization of the electrode, leading to drastic capacity fading. Here, interface and morphology-engineered amorphous Si matrix is being reported utilizing a few-layer vertical graphene (VG) buffer layer to retain high capacity at both slow and fast (dis)charging rates. The flexible mechanical support of VG due to the van-der-Waals interaction between the graphene layers, the weak adhesion between Si and graphene, and the highly porous geometry mitigated stress, while the three-dimensional mass loading enhanced specific capacity. Additionally, the high electronic conductivity of VG boosted rate-capability, resulting in a reversible gravimetric capacity of ≈1270 mAh g-1 (areal capacity of ≈37 µAh cm-2 ) even after 100 cycles at an ultrafast cycling rate of 20C, which provides a fascinating way for conductivity and stress management to obtain high-performance storage devices.

Core-Shell Structured Antimicrobial Nanofiber Dressings Containing Herbal Extract and Antibiotics Combination for the Prevention of Biofilms and Promotion of Cutaneous Wound Healing.

Burn wounds are susceptible to microbial invasion from both resident and exogenous bacteria, which becomes a critical public health issue and causes substantial economic burden. There is a perceived demand to produce new antimicrobial wound dressings that hinder bacterial colonization while accelerating the healing process and hence would provide an improved standard of care for patients. Since ancient times, herbal extracts from medicinally important plants have extensively been used for treating burn injuries. This work reports the utility of electrospun nanofibers containing plant extracts and antibiotics combination as a multifunctional scaffold for treating second-degree burns. First, we determined the various components of plant extracts from Gymnema sylvestre by two different processing methods and their synergism with minocycline antibiotics. Then, we prepared core-shell nanofibrous dressings with poly-ε-caprolactone/gelatin laden with minocycline hydrochloride as a shell and gelatin infused with G. sylvestre extracts (ultrasound-assisted extracts and cold macerated extracts) as the core using coaxial electrospinning. The electrospun nanofibers displayed a smooth, continuous, and bead-free morphology with adequate wettability. The presence of extract components in the core-shell nanofibers resulted in enhanced mechanical properties when compared to pristine mats. The core-shell structures resulted in sustained release of the bioactive components when compared to nanofiber blends. Core-shell nanofiber mats containing plant extracts and antibiotic combinations displayed potent antimicrobial and antibiofilm properties while promoting the spread and proliferation of skin cells when compared to pristine mats. In a porcine model of cutaneous second-degree burns, we showed that wounds treated with the antimicrobial dressing improved re-epithelialization and collagen organization in comparison to untreated wounds.

Electrochemical properties of vertically aligned graphenes: tailoring heterogeneous electron transfer through manipulation of the carbon microstructure.

The electrochemical response of different morphologies (microstructures) of vertically aligned graphene (VG) configurations is reported. Electrochemical properties are analysed using the outer-sphere redox probes Ru(NH3)6 2+/3+ (RuHex) and N,N,N',N'-tetramethyl-p-phenylenediamine (TMPD), with performances de-convoluted via accompanying physicochemical characterisation (Raman, TEM, SEM, AFM and XPS). The VG electrodes are fabricated using an electron cyclotron resonance chemical vapour deposition (ECR-CVD) methodology, creating vertical graphene with a range of differing heights, spacing and edge plane like-sites/defects (supported upon underlying SiO2/Si). We correlate the electrochemical reactivity/response of these novel VG configurations with the level of edge plane sites (%-edge) comprising their structure and calculate corresponding heterogeneous electron transfer (HET) rates, k 0. Taller VG structures with more condensed layer stacking (hence a larger global coverage of exposed edge plane sites) are shown to exhibit improved HET kinetics, supporting the claims that edge plane sites are the predominant source of electron transfer in carbon materials. A measured k 0 eff of ca. 4.00 × 10-3 cm s-1 (corresponding to an exposed surface coverage of active edge plane like-sites/defects (% θ edge) of 1.00%) was evident for the tallest and most closely stacked VG sample, with the inverse case true, where a VG electrode possessing large inter-aligned-graphene spacing and small flake heights exhibited only 0.08% of % θ edge and a k 0 eff value one order of magnitude slower at ca. 3.05 × 10-4 cm s-1. Control experiments are provided with conventional CVD (horizontal) grown graphene and the edge plane of highly ordered pyrolytic graphite (EPPG of HOPG), demonstrating that the novel VG electrodes exhibit ca. 3× faster k 0 than horizontal CVD graphene. EPPG exhibited the fastest HET kinetics, exhibiting ca. 2× larger k 0 than the best VG. These results are of significance to those working in the field of 2D-carbon electrochemistry and materials scientists, providing evidence that the macroscale electrochemical response of carbon-based electrodes is dependent on the edge plane content and showing that a range of structural configurations can be employed for tailored properties and applications.

Poly-ε-Caprolactone/Gelatin Hybrid Electrospun Composite Nanofibrous Mats Containing Ultrasound Assisted Herbal Extract: Antimicrobial and Cell Proliferation Study.

Electrospun fibers have emerged as promising materials in the field of biomedicine, due to their superior physical and cell supportive properties. In particular, electrospun mats are being developed for advanced wound dressing applications. Such applications require the firers to possess excellent antimicrobial properties in order to inhibit potential microbial colonization from resident and non-resident bacteria. In this study, we have developed Poly-ε-Caprolactone /gelatin hybrid composite mats loaded with natural herbal extract (Gymnema sylvestre) to prevent bacterial colonization. As-spun scaffolds exhibited good wettability and desirable mechanical properties retaining their fibrous structure after immersing them in phosphate buffered saline (pH 7.2) for up to 30 days. The initial burst release of Gymnema sylvestre prevented the colonization of bacteria as confirmed by the radial disc diffusion assay. Furthermore, the electrospun mats promoted cellular attachment, spreading and proliferation of human primary dermal fibroblasts and cultured keratinocytes, which are crucial parenchymal cell-types involved in the skin recovery process. Overall these results demonstrated the utility of Gymnema sylvestre impregnated electrospun PCL/Gelatin nanofibrous mats as an effective antimicrobial wound dressing.

Antimicrobial properties and biocompatibility of electrospun poly-ε-caprolactone fibrous mats containing Gymnema sylvestre leaf extract.

Wound care management presents one of the substantial and tenacious challenges to the healthcare systems worldwide. Microbial colonization and subsequent biofilm formation after injury have garnered much attention, as there is an appreciable correlation between biofilms formation and delayed healing in chronic wounds. Nanotechnology has emerged as a potential platform for the management of treating acute and chronic wounds. This study presents the utility of electrospun nanofiber mats containing a natural extract (Gymnema sylvestre) that averts biofilm formation but supports human dermal fibroblasts (hDFs) attachment. The scaffolds exhibited good wettability, enhanced mechanical properties and contact mediated inhibition of Gram-positive and Gram-negative bacteria. MTS viability assay and confocal imaging further confirmed that the natural extract loaded mats remained non-cytotoxic for hDFs. Overall these findings evidenced the suitability of the Gymnema sylvestre (GS) functionalized electrospun poly-ε-caprolactone (PCL) nanofibers, as an effective wound dressing with broad spectrum anti-bacterial properties.

Robust water repellent ZnO nanorod array by Swift Heavy Ion Irradiation: Effect of Electronic Excitation Induced Local Chemical State Modification.

Tailoring the surface properties by varying the chemistry and roughness could be of interest for self-cleaning applications. We demonstrate the transformation of hydrophobic ZnO Nano rod (NR) array into superhydrophobic nature by changing the local chemical state and without altering the surface roughness by swift heavy ion (SHI) irradiation. The aligned ZnO NR arrays were irradiated using 150 MeV Ag ions with different fluences from 5E10 to 3E12 ions/cm2. The observed static water contact angles of ZnO NRs samples were 103° ± 3°, 152° ± 4°,161° ± 3°, 164° ± 2°, 167° ± 2°,154 ± 3° and 151° ± 2° for the pristine, ion fluencies of 1E11, 3E11, 5E11, 7E11, 1E12 and 3E12 ions cm-2, respectively. The change in local surface chemistry via formation of surface oxygen related defects due to electronic excitations induced by ion irradiation determine the water dewetting properties. It is found that surface oxygen related defects could be tuned by varying the fluence of the SHIs. Durability tests show that the SHI induced surface oxygen-deficient ZnO NRs have the stable superhydrophobic behavior for more than a year.

Hybrid Gas Sensing and Transport Properties of Few-Walled CNTs Decorated with Discrete SnO2 Nanoparticles.

CVD grown, few walled carbon nanotubes (FWCNTs) were quasi decorated with SnO2nanoparticles (FWCNTs-SnO2) and its gas sensing properties were analyzed with ammonia and ethanol. At room temperature FWCNTs-SnO2show enhanced 'p type' gas sensing response than FWCNTs. Activation of SnO2at high temperatures led to systematic changes in the sensing behavior towards 'n type' response. Temperature dependent transport behavior was found to be a one dimensional variable range hopping mechanism (1 D-VRH) for the FWCNTs and a 3D-VRH mechanism for the FWCNTs-SnO2. These temperature dependent gas transport and sensing properties elucidate the hybrid nature of the nanocomposite with novel characteristics. This also implies its importance as a potential gas sensor material.