Universality and Multiplication of Gigahertz-Operated Silicon Pumps with Parts Per Million-Level Uncertainty.

The universality of physical phenomena is a pivotal concept underlying quantum standards. In this context, the realization of a quantum current standard using silicon single-electron pumps necessitates the verification of the equivalence across multiple devices. Herein, we experimentally investigate the universality of pumped currents from two different silicon single-electron devices which are placed inside the cryogen-free dilution refrigerator whose temperature (mixing chamber plate) was ∼150 mK under the operation of the pump devices. By direct comparison using an ultrastable current amplifier as a galvanometer, we confirm that two pumped currents are consistent with ∼1 ppm uncertainty. Furthermore, we realize quantum-current multiplication with a similar uncertainty by adding the currents of two different gigahertz (GHz)-operated silicon pumps, whose generated currents are confirmed to be identical. These results pave the way for realizing a quantum current standard in the nanoampere range and a quantum metrology triangle experiment using silicon pump devices.

Coulomb-mediated antibunching of an electron pair surfing on sound.

Electron flying qubits are envisioned as potential information links within a quantum computer, but also promise-like photonic approaches-to serve as self-standing quantum processing units. In contrast to their photonic counterparts, electron-quantum-optics implementations are subject to Coulomb interactions, which provide a direct route to entangle the orbital or spin degree of freedom. However, controlled interaction of flying electrons at the single-particle level has not yet been established experimentally. Here we report antibunching of a pair of single electrons that is synchronously shuttled through a circuit of coupled quantum rails by means of a surface acoustic wave. The in-flight partitioning process exhibits a reciprocal gating effect which allows us to ascribe the observed repulsion predominantly to Coulomb interaction. Our single-shot experiment marks an important milestone on the route to realize a controlled-phase gate for in-flight quantum manipulations.

Dual-gate control of the surface carriers of the highly-bulk-resistive topological insulator Sn0.02Bi1.08Sb0.9Te2S.

Exotic surface states of topological insulators have long attracted the attention of researchers. Recently, surface-dominant electrical transport in topological insulators has been observed; however, surface conduction in topological insulators is still not fully understood. To address this knowledge gap, we measured the transport properties of a thin flake of a highly bulk-resistive topological insulator, Sn0.02Bi1.08Sb0.9Te2S (Sn-BSTS), whose carrier density was controlled with the field effect. Single crystals of Sn-BSTS were synthesized by the Bridgman method, and Hall devices were fabricated with exfoliated flakes. The bottom gate structure was used to control the bottom surface of a Sn-BSTS flake. The measured Hall resistance was analyzed using the two-band model, which quantitatively showed that ambipolar conduction was achieved. In addition, the carriers on the top surface were controlled by the formation of an electrical double layer by an ionic liquid. With a top-gate voltage of -1.5 V, a massive number of p-type carriers were induced on the top surface of the Sn-BSTS flake, as also confirmed with the two-band model. The longitudinal resistance was also found to be affected by the carrier density. The magnetoresistance was enhanced when n- and p-type carriers coexisted on the top and bottom surfaces. In particular, the magnetoresistance was quantitatively shown to increase when the densities of n- and p-type carriers were similar. This study is the first to quantitatively analyze the conduction in Sn-BSTS in the presence of multiple types of carriers. Our findings pave the way for a quantitative understanding of transport phenomena in topological insulators.

Comparison between NIST Graphene and AIST GaAs Quantized Hall Devices.

Several graphene quantized Hall resistance (QHR) devices manufactured at the National Institute of Standards and Technology (NIST) were compared to GaAs QHR devices and a 100 Ω standard resistor at the National Institute for Advanced Industrial Science and Technology (AIST). Measurements of the 100 Ω resistor with the graphene QHR devices agreed within 5 nΩ/Ω of the values for the 100 Ω resistor obtained through GaAs measurements. The electron density of the graphene devices was adjusted at AIST to restore device properties such that operation was possible at low magnetic flux densities of 4 T to 6 T. This adjustment was accomplished with a functionalization method utilized at NIST, allowing for consistent tunability of the graphene QHR devices with simple annealing. Such a method replaces older and less predictable methods for adjusting graphene for metrological suitability. The milestone results demonstrate the ease with which graphene can be used to make resistance comparison measurements among many National Metrology Institutes.

Dynamical coupling between a nuclear spin ensemble and electromechanical phonons.

Dynamical coupling with high-quality factor resonators is essential in a wide variety of hybrid quantum systems such as circuit quantum electrodynamics and opto/electromechanical systems. Nuclear spins in solids have a long relaxation time and thus have the potential to be implemented into quantum memories and sensors. However, state manipulation of nuclear spins requires high-magnetic fields, which is incompatible with state-of-the-art quantum hybrid systems based on superconducting microwave resonators. Here we investigate an electromechanical resonator whose electrically tunable phonon state imparts a dynamically oscillating strain field to the nuclear spin ensemble located within it. As a consequence of the dynamical strain, we observe both nuclear magnetic resonance (NMR) frequency shifts and NMR sidebands generated by the electromechanical phonons. This prototype system potentially opens up quantum state engineering for nuclear spins, such as coherent coupling between sound and nuclei, and mechanical cooling of solid-state nuclei.