Ag and Cu Monometallic and Ag/Cu Bimetallic Nanoparticle-Graphene Composites with Enhanced Antibacterial Performance.

Increased proliferation of antimicrobial resistance and new strains of bacterial pathogens severely impact current health, environmental, and technological developments, demanding design of novel, highly efficient antibacterial agents. Ag, Cu monometallic and Ag/Cu bimetallic nanoparticles (NPs) were in situ grown on the surface of graphene, which was produced by chemical vapor deposition using ferrocene as precursor and further functionalized to introduce oxygen-containing surface groups. The antibacterial performance of the resulting hybrids was evaluated against Escherichia coli cells and compared through a series of parametrization experiments of varying metal type and concentration. It was found that both Ag- and Cu-based monometallic graphene composites significantly suppress bacterial growth, yet the Ag-based ones exhibit higher activity compared to that of their Cu-based counterparts. Compared with well-dispersed colloidal Ag NPs of the same metal concentration, Ag- and Cu-based graphene hybrids display weaker antibacterial activity. However, the bimetallic Ag/CuNP-graphene hybrids exhibit superior performance compared to that of all other materials tested, i.e., both the monometallic graphene structures as well as the colloidal NPs, achieving complete bacterial growth inhibition at all metal concentrations tested. This striking performance is attributed to the synergistic action of the combination of the two different metals that coexist on the surface as well as the enhancing role of the graphene support.

Poly(ethylene oxide)-b-poly(propylene oxide) amphiphilic block copolymer-mediated growth of silver nanoparticles and their antibacterial behavior.

Silver nanoparticles were grown in self-assembled amphiphilic poly(ethylene oxide)/poly(propylene oxide) (PEO/PPO) triblock copolymers in selective solvents. Ternary systems of block copolymer, water, and p-xylene were used, forming a dispersion of water droplets in oil (reverse micellar) as well as binary water/block copolymer solutions. Besides its stabilizing affect, the role of the copolymer as a reducing agent for the metal salt precursors was examined. It was found that block copolymer-enabled reduction, carried out mainly by the PEO blocks, could take place only under particular conditions mostly related to the metal precursor, the block copolymer concentration, and the self-assembled micellar configuration. The effect of the triblock copolymers on growth and stabilization of gold nanoparticles was also examined. The antibacterial effect of the silver nanoparticles was investigated against Escherichia coli cells, and their performance was evaluated through a series of parametrization experiments, including the effect of the metal concentration, stability, activity over time, and dosage, while particular emphasis was given on the role of ions versus nanoparticles on the antibacterial performance.

Catalytic NOx removal by single-wall carbon nanotube-supported Rh nanoparticles.

Single-wall carbon nanotubes functionalized with polyethylene glycol and doped with Rh nanoparticles were prepared and tested as catalyst for NO(x) reduction. Gravimetric adsorption studies were employed to elucidate the mechanism of NO adsorption on the active surface sites and to determine the onset of the desorption of oxygen. These studies provided information about the reaction kinetics and the lifetime of the catalyst, as well as the NO scission onset temperature and abatement rate, thus making possible to predict the conversion and define the optimum reaction conditions for efficient NO removal. Catalytic experiments were performed under different operating conditions and feed compositions, such as under rich operation, in presence of oxygen, and in presence of reducing CO and hydrocarbons. The developed nanostructured catalyst exhibits enhanced activity at lower temperatures in comparison to that reported for other Rh-based catalytic systems, while data about feed composition effects and carbon support depletion provided operating conditions that suppress N(2)O formation and extent the catalyst lifetime.

Magnetic carbon nanotubes with particle-free surfaces and high drug loading capacity.

Open-ended, multi-wall carbon nanotubes (CNTs) with magnetic nanoparticles encapsulated within their graphitic walls (magCNTs) were fabricated by a combined action of templated growth and a ferrofluid catalyst/carbon precursor, and tested as drug hosts. The hybrid nanotubes are stable under extreme pH conditions due to particle protection provided by the graphitic shell. The magCNTs are promising for high capacity drug loading given that the magnetic functionalization did not block any of the active sites available for drug attachment, either from the CNT internal void or on the internal and external surfaces. This is in contrast to typical approaches of loading CNTs with particles that proceed through surface attachment or capillary filling of the tube interior. Additionally, the CNTs exhibit enhanced hydrophilic character, as shown by water adsorption measurements, which make them suitable for biological applications. The morphological and structural characteristics of the hybrid CNTs are evaluated in conjunction to their magnetic properties and ability for drug loading (diaminophenothiazine). The fact that the magnetic functionality is provided from 'inside the walls' can allow for multimode functionalization of the graphitic surfaces and makes the magCNTs promising for targeted therapeutic applications.

Investigation of confined ionic liquid in nanostructured materials by a combination of SANS, contrast-matching SANS, and nitrogen adsorption.

Small-angle neutron scattering (SANS), contrast-matching SANS, and nitrogen adsorption have been utilized to investigate the confined ionic liquid (IL) [bmim][PF(6)] phase in ordered mesoporous silica MCM-41 and SBA-15. The results suggest that the pores of SBA-15 are completely filled with IL whereas a small fraction of the pore volume, the pore "core", of MCM-41 is empty. The contrast-matching SANS measurements confirm the enhanced solubility of water in IL. In addition, they provide strong evidence that water does not enter the empty pore core of MCM-41, possibly because of the preferred orientation of the IL molecules in the adsorbed layer.

Grafting of imidazolium based ionic liquid on the pore surface of nanoporous materials--study of physicochemical and thermodynamic properties.

Supported ionic liquid phase (SILP) systems were prepared by immobilizing a methylimidazolium cation based ionic liquid onto the pore surface of two types of support, MCM-41 and Vycor. The "grafting to" method was applied, involving (3-chloropropyl)-trialkoxysilane anchoring on the supports' silanol groups, followed by treatment with 1-methylimidazole and ion exchange with PF(6)(-). Optimum surface pretreatment procedures and reaction conditions for enhanced ionic liquid (IL) loading were properly defined and applied for all modifications. A study on the effect of different pore sizes on the physical state of the grafted 1-(silylpropyl)-3-methylimidazolium-hexafluorophosphate ([spmim][PF(6)(-)]) was also conducted. The [spmim][PF(6)(-)] crystallinity under extreme confinement in the pores was investigated by modulated differential scanning calorimetry (DSC) and X-ray diffraction (XRD) and was further related to the capacity of the developed SILP to preferentially adsorb CO(2) over CO. For this purpose, CO(2) and CO absorption measurements of the bulk ionic liquid [bmim][PF(6)(-)] and the synthesized alkoxysilyl-IL were initially performed at several temperatures. The results showed an enhancement of the bulk IL performance to preferentially adsorb CO(2) at 273 K. The DSC analysis of the SILPs revealed transition of the melting point of the grafted alkoxysilyl-IL to higher temperatures when the support pore size was below 4 nm. The 2.3 nm MCM-41 SILP system exhibited infinite CO(2)/CO separation capacity at temperatures below and above the melting point of the bulk IL phase, adsorbing in parallel significant amounts of CO(2) in a reversible manner. These properties make the developed material an excellent candidate for CO(2)/CO separation with pressure swing adsorption (PSA) techniques.

Heavy metal sorption by calcium alginate beads from Laminaria digitata.

Alginate with a high M/G ratio, extracted from Laminaria digitata, was evaluated for Cu(2+), Cd(2+) and Pb(2+) sorption in acidic solutions, in the form of calcium cross-linked beads. The high M/G ratio of alginate extracted from this algal species is most likely the determining factor for the increased adsorption capacity of the investigated metals, indicating that the mannuronic acid is responsible for the ion exchange mechanism. The data obtained from the batch experiments have been interpreted with Langmuir, Freundlich and Sips models. The Sips equation provided the best fit with the experimental results, indicating sorption sites heterogeneity for the material. The pH was found to have a significant effect on the process, with sorption capacity reaching a maximum at pH 4.5, indicating a competition mechanism between H(+) and metal ions. Kinetic experiments were performed at the optimum pH. For the interpretation of the kinetic experiments the Linear Adsorption Model was employed and diffusion coefficients were determined. The model fits the experimental data at higher concentrations, where the adsorbed quantity remains almost constant. Finally, a simplified expression of the batch kinetic adsorption model was employed. The model, predicts adequately, not only the diffusivity values, but also the concentration profiles inside the spherical particles.