Design and Mixing Analysis of a Passive Micromixer with Circulation Promoters.

A novel passive micromixer equipped with circulation promoters is proposed, and its mixing performance is simulated over a broad range of Reynolds numbers (0.1≤Re≤100). To evaluate the effectiveness of the circulation promoters, three different configurations are analyzed in terms of the degree of mixing (DOM) at the outlet and the associated pressure drop. Compared to other typical passive micromixers, the circulation promoter is shown to significantly enhance mixing performance. Among the three configurations of circulation promoters, Case 3 demonstrates the best performance, with a DOM exceeding 0.96 across the entire range of Reynolds numbers. At Re = 1, the DOM of Case 3 is 3.7 times larger than that of a modified Tesla micromixer, while maintaining a comparable pressure drop. The mixing enhancement of the present micromixer is particularly significant in the low and intermediate ranges of Reynolds numbers (Re<40). In the low range of Reynolds numbers (Re≤1), the mixing enhancement is primarily due to circulation promoters directing fluid flow from a concave wall to the opposite convex wall. In the intermediate range of Reynolds numbers (2≤Re<40), the mixing enhancement results from fluid flowing from one concave wall to another concave wall on the opposite side.

Mixing Performance of a Passive Micromixer Based on Split-to-Circulate (STC) Flow Characteristics.

We propose a novel passive micromixer leveraging STC (split-to-circulate) flow characteristics and analyze its mixing performance comprehensively. Three distinct designs incorporating submerged circular walls were explored to achieve STC flow characteristics, facilitating flow along a convex surface and flow impingement on a concave surface. Across a broad Reynolds number range (0.1 to 80), the present micromixer substantially enhances mixing, with a degree of mixing (DOM) consistently exceeding 0.84. Particularly, the mixing enhancement is prominent within the low and intermediate range of Reynolds numbers (0.1

Impacts of soil type and drought stress on growth and cesium accumulation in Napier grass.

In our previous study, the decontamination efficiency of cesium-137 (137Cs) by Napier grass (Pennisetum purpureum Schum.) in the field was shown to be variable and often influenced by natural environmental factors. To elucidate the factors influencing this variable 137Cs-decontamination efficiency, we investigated the influences of soil type and drought stress on Cs accumulation using cesium-133 (133Cs) in Napier grass grown in plastic containers. The experiment was performed using two soil types (Soil A and B) and three different soil moisture conditions: well-watered control (CL), slight drought stress (SD), and moderate drought stress (MD). Overall, our results indicate that soil type and drought have a significant impact on plant growth and 133Cs accumulation in Napier grass. Plant height (PH), tiller number (TN), leaf width (Wleaf), and dry matter weight of aboveground parts (DWabove) and root parts (DWroot) in Soil B were greater than those in Soil A. Drought stress negatively affected chlorophyll fluorescence parameters (maximal quantum efficiency of photosystem (PS) II photochemistry and potential activity of PS II), PH, TN, Wleaf, DWabove, DWroot, and total 133Cs content (TCs), but it had a positive effect on 133Cs concentration. The 133Cs concentration in the aboveground parts (Csabove) was increased by MD approximately 1.62-fold in Soil A and 1.11-fold in Soil B compared to each CL counterpart. The TCs in the aboveground parts (TCsabove) decreased due to drought by approximately 19.9%-39.0% in Soil A and 49.9%-62.7% in Soil B; however, there was no significant effect on TCsabove due to soil type. The results of this study indicate that soil moisture is a key factor in maintaining Napier grass 137Cs-decontamination efficiency.

Optimizing hydrogen gas production from genetically modified rice straw by steam co-gasification.

Future sustainability visions include clean, renewable energy from hydrogen, which can be produced, among other ways, by biomass steam gasification. This study explores strategies addressing the limitations in steam co-gasification of herbaceous biomass, using Monster-TUAT1 rice straw, a genetically modified rice plant with a taller and bigger stalk developed by Tokyo University of Agriculture and Technology (TUAT), and Giant Miscanthus, a promising energy crop, as the feedstock. Firstly, compared with the typical rice straw, the Monster TUAT1 demonstrated superior steam gasification performance with a 1.75 times higher hydrogen gas yield and 27.0 % less tar generation. With a focus on overcoming the challenges posed by high silica content in the Monster TUAT1, co-gasification of it with an energy crop of Giant Miscanthus was performed. However, even under the optimum operation condition (750 °C, steam flowrate: 0.15 g/min), the hydrogen gas yield was only 29.3 mmol/g-C with a tar yield of 27.6 %wt. and a carbon conversion efficiency of 45.9 %, which is deemed unsatisfactory for hydrogen production. Thus, strategies for enhancement were proposed, including the incorporation seaweed biochar with high alkali and alkaline earth species, calcined scallop shell powder, and alkali metal salt into the gasifier. Consequently, the introduction of 10 %wt. of calcined scallop shell resulted in an increase in H2 yield to 37.0 mmol/g-C and 24.3 % CO2 reduction. The addition of alkali metal salt led to 43.9 % increase of H2 product with a 15 %wt. tar yield. The most significant improvement occurred with the introduction of seaweed biochar at 50 %wt., increasing of the hydrogen gas yield to 62.0 mmol/g-C with 86 % of carbon conversion efficiency and tar reduction to 5.5 %. These findings demonstrate the viability of utilizing herbaceous biomass such as rice straw in conjunction with the strategic solutions of co-gasification to overcome constraints in improving hydrogen production.

Root-associated microbial community and diversity in napiergrass across radiocesium-contaminated lands after the Fukushima-Daiichi nuclear disaster in Japan.

The microbiome derived from soil associated with plant roots help in plant growth and stress resistance. It exhibits potential benefits for soil remediation and restoration of radioactive-cesium (137Cs)-contaminated soils. However, there is still limited information about the community and diversity of root-associated microbiome in 137Cs-contaminated soil after the Fukushima-Daiichi Nuclear Power Plant (FDNPP) disaster. To address this, a comparative analysis of communities and diversity of root-associated microbiomes was conducted in two field types after the FDNPP disaster. In 2013, we investigated the community and diversity of indigenous root-associated microbiome of napiergrass (Pennisetum purpureum) grown in both grassland and paddy fields of 137Cs-contaminated land-use type within a 30-km radius around the FDNPP. Results showed that the root-associated bacterial communities in napiergrass belonged to 32 phyla, 75 classes, 174 orders, 284 families, and 521 genera, whereas the root-associated fungal communities belonged to 5 phyla, 11 classes, 31 orders, 59 families, and 64 genera. The most frequently observed phylum in both grassland and paddy field was Proteobacteria (47.4% and 55.9%, respectively), followed by Actinobacteriota (23.8% and 27.9%, respectively) and Bacteroidota (10.1% and 11.3%, respectively). The dominant fungal phylum observed in both grassland and paddy field was Basidiomycota (75.9% and 94.2%, respectively), followed by Ascomycota (24.0% and 5.8%, respectively). Land-use type significantly affected the bacterial and fungal communities that colonize the roots of napiergrass. Several 137Cs-tolerant bacterial and fungal taxa were also identified, which may be potentially applied for the phytoremediation of 137Cs-contaminated areas around FDNPP. These findings contribute to a better understanding of the distribution of microbial communities in 137Cs-contaminated lands and their long-term ecosystem benefits for phytoremediation efforts.

Design and Mixing Analysis of a Passive Micromixer Based on Curly Baffles.

A novel passive micromixer based on curly baffles is proposed and optimized through the signal-to-noise analysis of various design parameters. The mixing performance of the proposed design was evaluated across a wide Reynolds number range, from 0.1 to 80. Through the analysis, the most influential parameter was identified, and its value was found to be constant regardless of the mixing mechanism. The optimized design, refined using the signal-to-noise analysis, demonstrated a significant enhancement of mixing performance, particularly in the low Reynolds number range (Re< 10). The design set obtained at the diffusion dominance range shows the highest degree of mixing (DOM) in the low Reynolds number range of Re< 10, while the design set optimized for the convection dominance range exhibited the least pressure drop across the entire Reynolds number spectrum (Re< 80). The present design approach proved to be a practical tool for identifying the most influential design parameter and achieving excellent mixing and pressure drop characteristics. The enhancement is mainly due to the curvature of the most influential design parameter.

Mixing Performance of a Passive Micromixer Based on Multiple Baffles and Submergence Scheme.

A novel passive micromixer based on multiple baffles and a submergence scheme was designed, and its mixing performance was simulated over a wide range of Reynolds numbers ranging from 0.1 to 80. The degree of mixing (DOM) at the outlet and the pressure drop between the inlets and outlet were used to assess the mixing performance of the present micromixer. The mixing performance of the present micromixer showed a significant enhancement over a wide range of Reynolds numbers (0.1 ≤ Re ≤ 80). The DOM was further enhanced by using a specific submergence scheme. At low Reynolds numbers (Re < 5), submergence scheme Sub24 produced the highest DOM, approximately 0.57, which was 1.38 times higher than the case with no submergence. This enhancement was due to the fluid flowing from or toward the submerged space, creating strong upward or downward flow at the cross-section. At high Reynolds numbers (Re > 10), the DOM of Sub1234 became the highest, reaching approximately 0.93 for Re = 20, which was 2.75 times higher than the case with no submergence. This enhancement was caused by a large vortex formed across the whole cross-section, causing vigorous mixing between the two fluids. The large vortex dragged the interface between the two fluids along the vortex perimeter, elongating the interface. The amount of submergence was optimized in terms of DOM, and it was independent of the number of mixing units. The optimum submergence values were 90 µm for Sub24 and Re = 1, 100 µm for Sub234 and Re = 5, and 70 µm for Sub1234 and Re = 20.

Identification of a Major Locus for Lodging Resistance to Typhoons Using QTL Analysis in Rice.

We detected a new target quantitative trait locus (QTL) for lodging resistance in rice by analyzing lodging resistance to typhoons (Maysak and Haishen) using a scale from 0 (no prostrating) to 1 (little prostrating or prostrating) to record the resistance score in a Cheongcheong/Nagdong double haploid rice population. Five quantitative trait loci for lodging resistance to typhoons were detected. Among them, qTyM6 and qTyH6 exhibited crucial effects of locus RM3343-RM20318 on chromosome 6, which overlaps with our previous rice lodging studies for the loci qPSLSA6-2, qPSLSB6-5, and qLTI6-2. Within the target locus RM3343-RM20318, 12 related genes belonging to the cytochrome P450 protein family were screened through annotation. Os06g0599200 (OsTyM/Hq6) was selected for further analysis. We observed that the culm and panicle lengths were positively correlated with lodging resistance to typhoons. However, the yield was negatively correlated with lodging resistance to typhoons. The findings of this study improve an understanding of rice breeding, particularly the culm length, early maturing, and heavy panicle varieties, and the mechanisms by which the plant's architecture can resist natural disasters such as typhoons to ensure food safety. These results also provide the insight that lodging resistance in rice may be associated with major traits such as panicle length, culm length, tiller number, and heading date, and thereby improvements in these traits can increase lodging resistance to typhoons. Moreover, rice breeding should focus on maintaining suitable varieties that can withstand the adverse effects of climate change in the future and provide better food security.

Effect of drought stress or soil pH on cesium accumulation in Napier grass.

Radio-cesium (Cs) decontamination efficiency by plants is supposedly affected by environmental conditions. To elucidate the factors influencing the unstable 137Cs-decontamination efficiency, we first examined the influence of drought or soil pH on Cs accumulation using cesium-133 (133Cs) using Napier grass (Pennisetum purpureum Schum.) grown under pot conditions. The experiment was performed on three different conditions with 150 µM 133Cs applied to soil: low pH (L-pH, pH = 5.6 ± 0.0), near-neutral pH (N-pH, pH = 6.6 ± 0.1), and the combination of low pH and drought stress (Drought). Drought stress had prominent negative effects on plant height, aboveground dry matter weight (DWabove), 133Cs concentrations in aboveground or root (Csabove or Csroot) parts, or 133Cs total content in the part aboveground (Cs-T). 133Cs concentration and total content in Drought conditions were reduced by 44.1% and 60.0% aboveground and 63.6% and 66.0% in root parts compared with counterpart normal soil moisture conditions (L-pH), respectively. Conversely, there were no significant effects of soil pH on Csabove, Csroot, or Cs-T in L-pH and N-pH conditions. Chlorophyll fluorescence parameters (Fv/Fm, Fv/F0) and the temperature in leaves were negatively affected by drought stress or soil pH conditions. From our results, drought strongly influenced plant growth and Cs accumulation in plants compared with soil acidity. Therefore, soil moisture appears to be a significant factor in maintaining 137Cs-decontamination efficiency by Napier grass.

Mixing Performance of the Modified Tesla Micromixer with Tip Clearance.

A passive micromixer based on the modified Tesla mixing unit was designed by embedding tip clearance above the wedge-shape divider, and its mixing performance was simulated over a wider range of the Reynolds numbers from 0.1 to 80. The mixing performance was evaluated in terms of the degree of mixing (DOM) at the outlet and the required pressure load between inlet and outlet. The height of tip clearance was varied from 40 µm to 80 µm, corresponding to 25% to 33% of the micromixer depth. The numerical results show that the mixing enhancement by the tip clearance is noticeable over a wide range of the Reynolds numbers Re < 50. The height of tip clearance is optimized in terms of the DOM, and the optimum value is roughly h = 60 µm. It corresponds to 33% of the present micromixer depth. The mixing enhancement in the molecular diffusion regime of mixing, Re ≤ 1, is obtained by drag and connection of the interface in the two sub-streams of each Tesla mixing unit. It appears as a wider interface in the tip clearance zone. In the intermediate range of the Reynolds number, 1 < Re ≤ 50, the mixing enhancement is attributed to the interaction of the flow through the tip clearance and the secondary flow in the vortex zone of each Tesla mixing unit. When the Reynolds number is larger than about 50, vortices are formed at various locations and drive the mixing in the modified Tesla micromixer. For the Reynolds number of Re = 80, a pair of vortices is formed around the inlet and outlet of each Tesla mixing unit, and it plays a role as a governing mechanism in the convection-dominant regime of mixing. This vortex pattern is little affected as long as the tip clearance remains smaller than about h = 70 µm. The DOM at the outlet is little enhanced by the presence of tip clearance for the Reynolds numbers Re ≥ 50. The tip clearance contributes to reducing the required pressure load for the same value of the DOM.

Impact of aquaculture on distribution of dissolved organic matter in coastal Jeju Island, Korea, based on absorption and fluorescence spectroscopy.

In Jeju Island, multiple land-based aquafarms were fully operational along most coastal region. However, the effect of effluent on distribution and behaviours of dissolved organic matter (DOM) in the coastal water are still unknown. To decipher characteristics of organic pollution, we compared physicochemical parameters with spectral optical properties near the coastal aquafarms in Jeju Island. Absorption spectra were measured to calculate the absorption coefficient, spectral slope coefficient, and specific UV absorbance. Fluorescent DOM was analysed using fluorescence spectroscopy coupled with parallel factor analysis. Dissolved organic carbon (DOC) and total dissolved nitrogen (TDN) were measured using high-temperature catalytic oxidation. The DOC concentration near the discharge outlet was twice higher than that in natural groundwater, and the TDN concentration exponentially increased close to the outlet. These distribution patterns indicate that aquafarms are a significant source of DOM. Herein, principal component analysis was applied to categorise the DOM origins. There were two distinct groups, namely, aquaculture activity for TDN with humic-like and high molecular weights DOM (PC1: 48.1%) and natural biological activity in the coastal water for DOC enrichment and protein-like DOM (PC2: 18.8%). We conclude that the aquafarms significantly discharge organic nitrogen pollutants and provoke in situ production of organic carbon. Furthermore, these findings indicate the potential of optical techniques for the efficient monitoring of anthropogenic organic pollutants from aquafarms worldwide.

Mixing Performance of a Passive Micro-Mixer with Mixing Units Stacked in Cross Flow Direction.

A new passive micro-mixer with mixing units stacked in the cross flow direction was proposed, and its performance was evaluated numerically. The present micro-mixer consisted of eight mixing units. Each mixing unit had four baffles, and they were arranged alternatively in the cross flow and transverse direction. The mixing units were stacked in four different ways: one step, two step, four step, and eight step stacking. A numerical study was carried out for the Reynolds numbers from 0.5 to 50. The corresponding volume flow rate ranged from 6.33 µL/min to 633 µL/min. The mixing performance was analyzed in terms of the degree of mixing (DOM) and relative mixing energy cost (MEC). The numerical results showed a noticeable enhancement of the mixing performance compared with other micromixers. The mixing enhancement was achieved by two flow characteristics: baffle wall impingement by a stream of high concentration and swirl motion within the mixing unit. The baffle wall impingement by a stream of high concentration was observed throughout all Reynolds numbers. The swirl motion inside the mixing unit was observed in the cross flow direction, and became significant as the Reynolds number increased to larger than about five. The eight step stacking showed the best performance for Reynolds numbers larger than about two, while the two step stacking was better for Reynolds numbers less than about two.

Optimal Combination of Mixing Units Using the Design of Experiments Method.

A passive micromixer was designed by combining two mixing units: the cross-channel split and recombined (CC-SAR) and a mixing cell with baffles (MC-B). The passive micromixer was comprised of eight mixing slots that corresponded to four combination units; two mixing slots were grouped as one combination unit. The combination of the two mixing units was based on four combination schemes: (A) first mixing unit, (B) first combination unit, (C) first combination module, and (D) second combination module. The statistical significance of the four combination schemes was analyzed using analysis of variance (ANOVA) in terms of the degree of mixing (DOM) and mixing energy cost (MEC). The DOM and MEC were simulated numerically for three Reynolds numbers (Re = 0.5, 2, and 50), representing three mixing regimes. The combination scheme (B), using different mixing units in the first two mixing slots, was significant for Re = 2 and 50. The four combination schemes had little effect on the mixing performance of a passive micromixer operating in the mixing regime of molecular dominance. The combination scheme (B) was generalized to arbitrary mixing slots, and its significance was analyzed for Re = 2 and 50. The general combination scheme meant two different mixing units in two consecutive mixing slots. The numerical simulation results showed that the general combination scheme was statistically significant in the first three combination units for Re = 2, and significant in the first two combination units for Re = 50. The combined micromixer based on the general combination scheme throughout the entire micromixer showed the best mixing performance over a wide range of Reynolds numbers, compared to other micromixers that did not adopt completely the general combination scheme. The most significant enhancement due to the general combination scheme was observed in the transition mixing scheme and was negligible in the molecular dominance scheme. The combination order was less significant after three combination units.

Development of clinical application program for radiotherapy induced cancer risk calculation using Monte Carlo engine in volumetric-modulated arc therapy.

BACKGROUND: The purpose of this study is to develop a clinical application program that automatically calculates the effect for secondary cancer risk (SCR) of individual patient. The program was designed based on accurate dose calculations using patient computed tomography (CT) data and Monte Carlo engine. Automated patient-specific evaluation program was configured to calculate SCR. METHODS: The application program is designed to re-calculate the beam sequence of treatment plan using the Monte Carlo engine and patient CT data, so it is possible to accurately calculate and evaluate scatter and leakage radiation, difficult to calculate in TPS. The Monte Carlo dose calculation system was performed through stoichiometric calibration using patient CT data. The automatic SCR evaluation program in application program created with a MATLAB was set to analyze the results to calculate SCR. The SCR for organ of patient was calculated based on Biological Effects of Ionizing Radiation (BEIR) VII models. The program is designed to sequentially calculate organ equivalent dose (OED), excess absolute risk (EAR), excess relative risk (ERR), and the lifetime attributable risk (LAR) in consideration of 3D dose distribution analysis. In order to confirm the usefulness of the developed clinical application program, the result values from clinical application program were compared with the manual calculation method used in the previous study. RESULTS: The OED values calculated in program were calculated to be at most approximately 13.3% higher than results in TPS. The SCR result calculated by the developed clinical application program showed a maximum difference of 1.24% compared to the result of the conventional manual calculation method. And it was confirmed that EAR, ERR and LAR values can be easily calculated by changing the biological parameters. CONCLUSIONS: We have developed a patient-specific SCR evaluation program that can be used conveniently in the clinic. The program consists of a Monte Carlo dose calculation system for accurate calculation of scatter and leakage radiation and a patient-specific automatic SCR evaluation program using 3D dose distribution. The clinical application program that improved the disadvantages of the existing process can be used as an index for evaluating a patient treatment plan.

Effects of environmental conditions, low-level potassium, ethylenediaminetetraacetic acid, or combination treatment on radiocesium-137 decontamination in Napier grass.

Phytoextraction is widely used to remove environmental pollutants such as heavy metals or radionuclides from soil. It is important to understand how to enhance the accumulation of contaminants by plants. Previously, we found that Napier grass (Pennisetum purpureum Schum.) has the potential to effectively remove Cs (133Cs and 137Cs). In order to enhance the remediation efficiency of Napier grass, we evaluated the effects of low-level K (K), ethylenediaminetetraacetic acid (EDTA), or the combination of low-level K and EDTA (K+EDTA). We also examined the differences in 137Cs decontamination between two cropping years (2018 and 2019). Overall, there were no prominent effects from the K, EDTA, or K+EDTA treatments on plant growth (plant height, tiller number), aboveground biomass, 137Cs concentration, and 137Cs removal ratio (CR) in 2 years. However, the aboveground biomass (P < 0.001), 137Cs concentration (P < 0.001 in 2019 only), and CR (P < 0.001) in plants grown in the first growing period were significantly higher than in plants grown in the second growing period in both years. The mean 137Cs concentration (P < 0.001) and total CR (P < 0.001) per year was significantly greater in 2019 than in 2018. The precipitation amount during the cultivation period in 2019 (1197 mm) was 1.8-fold higher than in 2018 (655 mm). In this study, the K, EDTA, and K+EDTA treatments had less effect plant growth than the natural environmental conditions. To enhance remediation efficiency, soil moisture is one important factor to produce more aboveground biomass to achieve high CR in Napier grass.

A novel rice dull gene, LowAC1, encodes an RNA recognition motif protein affecting Waxyb pre-mRNA splicing.

A new dull grain rice mutant with low amylose content, designated lowac1, has been isolated and characterized. To identify the causal mutation site, resequencing of the whole genome and analysis of a cleaved amplified polymorphic sequence (CAPS) marker were performed. Genotypes using the CAPS marker of the identified LowAC1 gene encoding an RNA recognition motif (RRM) protein were entirely consistent with low amylose phenotypes in BC1F2 progeny. Moreover, the segregation of BC1F2 population indicated that the low amylose phenotype was controlled by a single recessive gene. lowac1 involves a single-nucleotide polymorphism from G to A within the gene, resulting in the stop codon generation. The RRM protein deletion in the mutant seed specifically affected the splicing efficiency of Waxyb (Wxb) in the 5' splice site of intron 1, resulting in decreased protein levels of granule-bound starch synthase I (GBSSI) encoded by Wxb. Whereas, the RRM protein did not affect amylose content in Wxa of indica variety. Also, the mutation induced a little variation in the expression levels of some genes involved in starch biosynthesis. Particularly, expression levels of SBEIIb, PUL, and AGPL2 mRNAs in lowac1 mutant were approximately two times higher compared to the corresponding wild type (WT) genes. Aside from low amylose content, lowac1 seeds included an amylopectin structure reducing short chains compared to that of WT seeds. Overall, our data suggest that LowAC1 is a novel regulatory factor for starch synthesis in rice.

First report of community dynamics of arbuscular mycorrhizal fungi in radiocesium degradation lands after the Fukushima-Daiichi Nuclear disaster in Japan.

Arbuscular mycorrhizal fungi (AMF) can be beneficial for improving restoration of radioactive-cesium (137Cs)-contaminated soils through soil remediation. However, there has been no information on species diversity and the composition of AMF communities in 137Cs-contaminated soil after the Fukushima-Daiichi Nuclear Power Plant (NPP) disaster. We examined the community dynamics of indigenous AMF colonizing roots of napiergrass (Pennisetum purpureum) in two different 137Cs-contaminated land-use fields (grassland and paddy field) by an Illumina MiSeq sequencing investigation within a 30-km radius around the Fukushima-Daiichi NPP in 2013 (sampling year 1) and 2014 (sampling year 2). We found nine AMF families, including Glomeraceae, Gigasporaceae, Paraglomeraceae, Claroideoglomeraceae, Acaulosporaceae, Archeosporaceae, Ambisporaceae, Diversisporaceae and uncultured Glomeromycotina in roots. Glomeraceae was the most abundant in both grassland and paddy field, followed by Paraglomeraceae. The diversity of AMF in grassland and paddy field was higher in 2014 than in 2013. Furthermore, the AMF community structure was impacted by sampling year and land-use type. The AMF community structures colonizing napiergrass roots were also significantly impacted by land-use type and year throughout the 2-year investigation. To our knowledge, our results are the first report to reveal the community dynamics of indigenous AMF in the 137Cs-contaminated fields around NPP.

Preparation and Characterization of Celecoxib Nanosuspension Using Bead Milling.

The aim of this study is to develop nanosuspension for improved dissolution of poorly water-soluble celecoxib. We first prepared coarse suspension of celecoxib with Tween 80 and hydroxypropyl methylcellulose as stabilizers, and then fabricated nanosuspension using the bead milling technique. Depending on milling time, the physical properties of nanosuspension were evaluated by photon correlation spectroscopy (e.g., particle size and distribution) and scanning electron microscopy (SEM) (e.g., morphology). As results, the mean size of crystalline celecoxib particles was highly reduced (368.1±14.5 nm) as milling process proceeded comparing to celecoxib powder (6.5±1.0 µm). Morphology of milled celecoxib particles has changed considerably from bar-shape or plate-shape to needle-shape due to a high energy caused by milling. In the dissolution test, the celecoxib nanosuspension showed an improved dissolution profile at pH 1.2 compared to celecoxib powder (less than 1%). In contrast, 53.4% of celecoxib in nanosuspension was dissolved up to 30 minutes, demonstrating improved dissolution of celecoxib. Taken together, bead-milled nanosuspension could be an effective strategy that can improve the dissolution and bioavailability.

Removing Control of Cyclodextrin-Drug Complexes Using High Affinity Molecule.

Nanostructured supramolecular assemblies with hydrophobic cavities are used for improving the solubility, bioavailability, and stability of poorly water soluble drugs. In particular, host-guest inclusion using 2-hydroxypropyl-beta-cyclodextrin (HP-ß-CD) is a typical approach in the pharmaceutical field. In this study, celecoxib (CXB), a cyclooxygenase-2 selective nonsteroidal anti-inflammatory drug (NSAID), was used as the model drug (guest material) and effectively incorporated into HP-ß-CD (host material). After forming a complete complex of HP-ß-CD and CXB, 1-adamantylamine (ADA) was used to allow CXB to be released from the HP-ß-CD in a concentration-dependent manner. This was revealed from Fourier-transform infrared spectroscopy and drug dissolution studies. Notably, the use of ADA, which is a high-affinity guest molecule, with cyclodextrin accelerated the removal of CXB from the host material through the exchange of guest molecules. Taken together, the host-guest based approach using a second guest molecule is useful for regulating on-demand drug release and could therefore be a potential tool for biomedical applications.

Improved Dissolution and Oral Bioavailability of Celecoxib by a Dry Elixir System.

The purpose of this study was to develop and evaluate a dry elixir (DE) system for enhancing the dissolution rate and oral bioavailability of celecoxib. DE system has been used for improving solubility, oral bioavailability of poorly water-soluble drugs. The encapsulated drugs or solubilized drugs in the matrix are rapidly dissolved due to the co-solvent effect, resting in both an enhanced dissolution and bioavailability. DEs containing celecoxib were prepared by spray-drying method and characterized by morphology, drug/ethanol content, drug crystallinity, dissolution rate and oral bioavailability. The ethanol content and drug content in DE system could be easily altered by controlling the spraydrying conditions. The dissolution profile of celecoxib from DE proved to be much higher than that of celecoxib powder due to the nano-structured matrix, amorphous state and encapsulated ethanol. The bioavailability of celecoxib from DEs was compared with celecoxib powder alone and commercial product (Celebrex®) in rats. In particular, blood concentrations of celecoxib form DE formulation were much greater than those of native celecoxib and market product. The data demonstrate that the DE system could provide an useful solid dosage form to enhance the solubility, dissolution rate and oral bioavailability of celecoxib.