The education and training of clinical medical physicists in 25 European, 2 North American and 2 Australasian countries: similarities and differences.

PURPOSE: The clinical medical physicist is part of a team responsible for safe and competent provision of radiation-based diagnostic examinations and therapeutic practices. To ensure that the physicist can provide an adequate service, sufficient education and training is indispensable. The aim of this study is to provide a structured description of the present status of the clinical medical physicist education and training framework in 25 European, 2 North American and 2 Australasian countries. METHODS: For this study, data collection was based on a questionnaire prepared by the European Federation of Organizations in Medical Physics (EFOMP) and filled-in either by the corresponding scientific societies-organizations or by the authors. RESULTS: In the majority of cases, a qualified medical physicist should have an MSc in medical physics and 1-3 years of clinical experience. Education and training takes place in both universities and hospitals and the total duration of the programs ranges from 2.5 to 9 years. In 56% of all European countries, it is mandatory to hold a diploma or license to work as a medical physicist, the situation being similar in Australasian and 4 states of USA. Generally, there are national registers of medical physicists with inclusion on the register being voluntary. There are renewal mechanisms in the registers usually based on a Continuing Professional Development (CPD) system. CONCLUSIONS: In conclusion, a common policy is followed in general, on topics concerning education and training as well as the practice of the medical physicist profession, notwithstanding the presence of a few differences.

A study in Europe of patient dosimetry in diagnostic radiology: protocol development and findings.

In a multi-centre study more than 600 patient measurements of patients receiving thorax radiography were performed in five European cities. Participating centres were Fulda, Liverpool, Nicosia, Passau and Sofia. The dose quantities measured were the air kerma-area product (AKAP), incident air kerma and entrance surface air kerma (ESAK). In addition, for each patient sex, age, weight, height, focus-to-film distance, focus-to-skin distance, patient thickness, kV, mAs, field size and the nominal film speed were registered. Different X-ray machines were used in the participating centres--Thoravision, flat panel detector and film screen combinations in two centres (analogue system). The tube voltages employed varied between 60 and 150 kV and the nominal film speed between 200 and 400/800. All mean dose values (ESAK and AKAP) for the different centres showed a different value for female and male populations. The differences were up to 100 % and always higher for the mean AKAP. For a thorax posteroanterior examination, the mean ESAK varied between 0.06 and 0.46 mGy and the mean AKAP varied between 60 and 690 mGy cm(2). The differences in the results obtained as well as the methodologies for multi-national, multi-centre studies will be discussed. Future perspectives for this type of study within the framework of radiation protection and quality assurance in Europe will also be discussed as well as the role and function of multi-national radiological data sets including patient dose values.

Surface EMG analysis on normal subjects based on isometric voluntary contraction.

The objective of this study was to compute reference SEMG values for normal subjects of 13 parameters extracted in the time, frequency and bispectrum domain, from the Biceps Brachii (BB) muscle generated under isometric voluntary contraction (IVC). SEMG signals were recorded from 94 subjects for 5s at 10, 30, 50, 70 and 100% of maximum voluntary contraction (MVC). The Wilcoxon signed rank test was applied to detect significant differences or not at p<0.05 between force levels for each of the 13 parameters. The main findings of this study can be summarized as follows: (i) The time domain parameters turns per second and number of zero crossings per second increase significantly with force level. (ii) The power spectrum median frequency parameter decreases significantly with force level, whereas maximum power and total power increase significantly with force level. (iii) The bispectrum parameter, maximum amplitude, increases significantly with force level with the exception the transition from 30% to 50% MVC. Although, the tests for Gaussianity and linearity show no significant difference with force level, the SEMG signal exhibits a more Gaussian distribution with increase of force up to 70% MVC. The SEMG linearity test, which is a measure of how constant the bicoherence index is in the bi-frequency domain, shows that the signal's bicoherence index is less constant (hence, the signal is less linear) at 70% of MVC compared to 10, 30, 50 and 100% MVC. (iv) The time domain parameters have good correlation between them as well as, between each one of them and maximum and total power. The median frequency has a good (negative) correlation with the bispectrum peak amplitude. (v) No significant differences exist between values based on gender or age. The findings of this study can further be used for the assessment of subjects suffering with neuromuscular disorders, or in the rehabilitation laboratory for monitoring the elderly or the disabled, or in the occupational medicine laboratory.