Influence of psychiatric symptom profiles of parents on sleep bruxism intensity of their children.

OBJECTIVE: The objective of this study was to evaluate the effects of parental anxiety, depression levels and psychiatric symptom profiles of parents on the occurrence of sleep bruxism in children. MATERIAL & METHODS: This cross-sectional study was carried out with a sample of 94 children aged 6 to 12 years, divided into two groups: with sleep bruxism (bruxism group-BG) and without sleep bruxism (control group-CG). Beck Depression Inventory (BDI), Symptom Checklist (SCL-90-R), Symptom Checklist and Screen for Child Anxiety Related Emotional Disorders-Parent (SCARED-P) scale were used to assess anxiety and depression levels of parents. All questionnaires were filled out by parents of children. Intraoral and extraoral examinations were carried out of children in the clinic and sleep bruxism was determined. All stress conditions were investigated by logistic regression analysis. In the comparison of the qualitative data, chi-square and Fisher exact tests were used. RESULTS: The data revealed that participants whose mothers had high anxiety and interpersonal sensitivity scores, and participants whose fathers had a medium level of obsessive-compulsive disorder were more likely to have an SB problem (p < 0.05). According to the results of BDI, the fathers' results between the BG and the CG were not statistically significant (p > 0.05). However, the mothers' results between the BG and the CG were statistically significant (p < 0.05) When all subscales of SCARED-P were evaluated, the separation anxiety disorder subscore was statistically significant in the bruxism group. CONCLUSION: The psychological status of parents is a significant risk factor associated with SB development in school-age children.

Reactions of Subcutaneous Connective Tissue to Mineral Trioxide Aggregate, Biodentine®, and a Newly Developed BioACTIVE Base/Liner.

AIM: There is an increasing interest in the application of BioACTIVE materials to achieve hard tissue formation and maintain pulp vitality. Mineral trioxide aggregate (MTA) and Biodentine® are BioACTIVE materials used for pulp capping. Recently, dental researchers have produced BioACTIVE glass-incorporated light-curable pulp capping material. The study is aimed at evaluating the subcutaneous connective tissue reactions to MTA, Biodentine®, ACTIVA BioACTIVE Base/Liner. These materials were placed in polyethylene tubes and implanted into the dorsal connective tissue of Sprague Dawley rats. The presence of inflammation, predominant cell type, calcification, and thickness of fibrous connective tissue was recorded by histological examination 7, 30, and 60 days after the implantation procedure. Scores were defined as follows: 0 = none or few inflammatory cells, no reaction; 1 = <25 cells, mild reaction; 2 = 25 to 125 cells, moderate reaction; and 3 = ≥125 cells, severe reaction. Fibrous capsule thickness, necrosis, and formation of calcification were recorded. ANOVA and post hoc Dunnett's tests were used for statistically analyses (p < 0.05). RESULTS: In terms of oedema, inflammation, fibrous capsule, and necrosis, no significant differences were found in any time period for any material. MTA and Biodentine® showed higher calcification than in the ACTIVA BioACTIVE on day 30, and the difference was statistically significant (p < 0.05). After 60 days, while calcification was not seen in the control group, it was observed in the test groups. There was a statistically significant difference between the control and the others. CONCLUSION: All materials were well tolerated by the tissues in the 60-day evaluation period. One notable finding is the presence of dystrophic calcification in the connective tissue adjacent to the newly developed BioACTIVE Base/Liner material. Therefore, this new BioACTIVE Base/Liner material may be safely recommended to clinicians as a pulp capping material.

Comparison of the micro-tensile bond strengths of four different universal adhesives to caries-affected dentin after ER:YAG laser irradiation.

The micro-tensile bond strengths (micro-TBSs) of four universal adhesive systems, applied in two different bonding techniques, to carries-affected dentin after Er:YAG laser irradiation were investigated. Twenty-four extracted human molars were divided into four groups, according to the adhesive systems used. Each group was subdivided into two subgroups, depending on the bonding method used: the etch-and-rinse procedure or self-etch procedure. The carious lesions were irradiated using an Er:YAG laser. Resin composites were used to restore the adhesive-treated dentin surfaces. After 2,500 thermal cycles, the vertical composite resin-dentin sticks obtained were subjected to micro-TBS tests. One tooth in each group was examined using scanning electron microscopy (SEM). There were statistically significant differences (p<0.001) in micro-TBS values between universal adhesives. The results of this study suggested that universal adhesives applied both with self and total etch technique can be used for adhesive restorations to caries-affected dentin after Er:YAG laser irradiation. If lasers are preferred as a caries removal method, choosing a dentin bonding agent containing MDP may be recommended in clinical practice due to the property of increasing the bonding strength.

Effect of a novel commercial potassium-oxalate containing tooth-desensitizing mouthrinse on the microhardness of resin composite restorative materials with different monomer compositions.

BACKGROUND: The effects of mouthrinses on dental resin composites have been investigated extensively. However, there is little information available regarding the effects of 'newly developed mouthrinse' formulations on the microhardness of different monomer based composite systems. Therefore, the aim of this study was to investigate the effect of a novel potassium-oxalate containing desensitizing mouthrinse on the microhardness of different monomer based composite materials. MATERIAL AND METHODS: A hundred and twenty specimens (6mm in diameter and 2mm in height) were prepared for composite resin groups (methacrylate based, DX-511 monomer based and silorane monomer based) and for storage solution groups (artificial saliva and potassium oxalate-containing tooth-desensitizing mouthrinse). After allowing post-polimerization the baseline Knoop microhardness measurements for all specimens were recorded. The specimens were stored in 20 mL mouthwash and artificial saliva for 12 hours at 37ºC. The post-immersion microhardness values of all specimens were also recorded. Data were subjected to ANOVA/Scheffe's test at a significance level of 0.05. The intra group (pre and post immersion values) comparison of the mean microhardness values of the specimens was done using Wilcoxon signed rank test. RESULTS: The microhardness of the silorane based composite was not affected significantly (p>0.05). The hardness values of the DX-511 monomer based composite and the methacrylate based composite exhibited a slight but not significant microhardness change compared to the baseline values (p>0.05). CONCLUSIONS: Studies reported that the effect of mouthrinses on microhardness changes of composite resins may be material dependent, and the hardness change susceptibility of a restorative material may be attributed to its resin matrix or filler type. However, dental monomers as well as the oral care products have an ever-evolving technology and future studies should consider newer products. Potassium oxalate containing mouthrinses, especially alcohol-free ones, may be used safely with dental composites with newly developed low-shrink monomer compositions. Key words:Microhardness, monomers, mouthrinses, potassium-oxalate.

Influence of activated bleaching on various adhesive restorative systems.

STATEMENT OF THE PROBLEM: When adhesive restorations are used in combination with bleaching in clinical applications, it is generally recommended to wait for a period of time between the two procedures. However, it is not clear if a time interval is necessary between applying the bleaching treatments and the silorane-based restorative system. PURPOSE: The purpose of this in vitro study was to determine if activated bleaching affects the bond strength of silorane-based restorative, a newly developed restorative that uses a polymerization system that has been reported to be insensitive to oxygen. METHODS: A gel consisting of 38% hydrogen peroxide was applied to ground labial enamel surfaces and activated using a diode laser to bleach the teeth. Then, without waiting for any period of time, four different restorative materials were applied to the bleached enamel surfaces, and these sets were compared with nonbleached control samples. The shear bond strength of the restorative systems to enamel was tested, and data was evaluated using two-way analysis of variance and Tukey HSD tests. RESULTS: Significant differences (p<0.05) in shear bond strengths were found among bleached and nonbleached enamel surfaces. CONCLUSION: It may be more beneficial to allow a time interval of 2 to 3 weeks between activated hydrogen peroxide bleaching and applying silorane-based composite restoratives or methacrylate-based composites than just applying restorative agents immediately after bleaching. However, further studies are needed to examine the structural effects of activated hydrogen peroxide on enamel. CLINICAL SIGNIFICANCE: A time interval should be allowed between the application of silorane-based or methacrylate-based restorations and activated hydrogen peroxide bleaching systems.

The effect of dentin hypersensitivity treatments on the shear bond strength to dentin of a composite material.

This study sought to evaluate the influence of a dentin desensitizer and ozone application on the bond strength to dentin of a composite resin material. The dentin desensitizing agent and ozone treatment were applied on the cervical dentin surfaces of extracted, caries-free, erupted third molars. Dentin surfaces that received no treatment were used as control samples. A dentin bonding agent was applied according to the manufacturer's instructions and an adhesion test was performed according to ISO/TS 11405. Statistical analysis showed no significant influence of the different hypersensitivity treatments on shear bond strength to dentin (ANOVA and Tukey's tests, p > 0.05). Within the limitations of this in vitro study, it appears that the short-term use of dentin hypersensitivity treatments like ozone and dentin desensitizers containing gluteraldehyde do not further affect the shear bond strength to dentin of subsequent composite resin restorations.

Prevalence of oral abnormalities in a Turkish newborn population.

OBJECTIVE: There are a few studies that describe the oral findings in newborn children in various populations but none conducted for a Turkish population. Hence, this study determined the prevalence of intraoral findings in a group of newborns and examined the correlation among these findings with the mother's systemic and gestational medical complications, cigarette consumption during pregnancy and consanguinity between the parents. METHODS: 2,021 full-term, newborn children were examined. Oral cysts, ankyloglossia, attached upper midline frenum and other medical diagnoses at birth were investigated. Medical information for each child and parent was recorded via standard questionnaire. Obtained data was analysed using the Pearson Chi-Square test (P≤0.05). RESULTS: The most common findings were of oral inclusion cysts situated palatally. CONCLUSIONS: There was a statistically significant relationship between the presence of oral inclusion cysts with the congenital diabetes and also insulin treatment and cigarette consumption during pregnancy. Moreover, a significant relationship was found between the presence of oral inclusion cysts and gestational diabetes and with the presence of consanguinity between the parents (P=0.004).

Shear bond strength to enamel after power bleaching activated by different sources.

The purpose of the present study was to evaluate enamel bond strength of a composite resin material after hydrogen peroxide bleaching, activated by a diode laser (LaserSmile), an ozone device (HealOzone), a light-emitting diode (BT Cool whitening system), and a quartz-Plus. Fifty extracted caries-free permanent incisors were used in this study. Thirty-eight percent hydrogen peroxidegel was applied to sound, flattened labial enamel surfaces and activated by different sources. Enamel surfaces that had received no treatment were used as control samples. Bonding agent was applied according to the manufacturer's instructions and the adhesion test was performed according to ISO/TS 11405. Statistical analysis showed significant influence of the different activation technique of hydrogen peroxide on shear bond strength to enamel (ANOVA, LSD, P < 0.05). The data in this vitro explorative study suggest the activation of hydrogen peroxide by different sources may further affect the shear bond strength of subsequent composite resin restoration to enamel. Within the limitations of this in vitro study, further studies examining the structural changes of activated hydrogen peroxide-treated enamel are needed. Due to the different activation methods; duration of light irradiation effects, longer time periods may be needed before application of adhesive restorations to enamel, compared with non-activated bleaching.

Primary ciliary dyskinesia: Kartagener syndrome with central giant cell granuloma. A case report.

This paper describes a clinical case of both giant cell granuloma and Kartagener syndrome in a 15-year-old male patient, with emphasis on the radiographic aspects of this extremely unusual pathology. To our knowledge, the presence of these 2 rare clinical conditions in the same patient has not been previously reported.

Influence of experimental provisional cements containing zeolite, bone hydroxyapatite and linoleic Acid on bond strength of composite to dentin in vitro.

PURPOSE: to evaluate the dentin bond strength of a composite resin material after the removal of two experimental cements containing zeolite, bone hydroxyapatite and linoleic acid, and one conventional glass-ionomer cement intended as provisional cements. MATERIALS AND METHODS: forty extracted caries-free, erupted permanent third molars were used. Experimental provisional cements containing zeolite and bone hydroxyapatite (BHA) and one conventional glass-ionomer cement (GIC) were placed on the dentin surfaces and covered with tinfoil. Cement-covered dentin surfaces were stored in distilled water at 37°C ± 2°C for seven days. After this period, temporary cements were mechanically removed, dentin surfaces were rinsed in distilled water and dried with an air syringe before adhesive application. Dentin bonding agent was applied according to the manufacturer's instructions and the adhesion test was performed according to ISO TR 11405. RESULTS: the following shear bond strengths for the composite material were obtained: no treatment applied (control, group 4): 17.30 ± 1.37 MPa; provisional cement containing BHA (group 2): 15.03 ± 3.44 MPa; GIC (group 3): 14.13 ± 2.85 MPa; provisional cement containing zeolite (group 1): 11.29 ± 2.71 MPa. The difference between groups 1 and 4 the control group was significant, where as the statistical analysis showed no significant difference between the control and BHA groups (ANOVA, Tukey's, p > 0.05). CONCLUSION: in clinical applications where the previous application of provisional cements is necessary, material choice may influence the bond strength of the subsequent composite resin restoration.

Adhesion to primary and permanent dentin and a simple model approach.

OBJECTIVES: First to compare different dentin bonding agents' shear bond strength to primary and permanent dentin. Secondly to compare the fracture failure modes and making an attempt to develop a statistical model that could be helpful in predicting them. METHODS: Extracted human primary and permanent molars were used as substrates (dentin). The shear bond strength of composite to substrate was measured and fracture surfaces were evaluated visually and with stereomicroscope. Using the data obtained, a statistical model was built in order to predict the failure modes. RESULTS: Higher bond strength values were obtained for permanent dentin. Total-etch adhesives displayed higher shear bond strength values than the self-etch adhesive. Adhesive failures were more frequently seen in primary dentin. Self-etch adhesive system displayed more adhesive failures. Prepared model confirmed the negative relationship between shear bond strength and the probability of observing adhesive failure. CONCLUSIONS: There should be an application protocol for the usage of dentin bonding agents in primary dentin. Further development of statistical and fuzzy models for failure modes can be supportive alternatives for microscopic evaluations and also be helpful in understanding and eliminating the factors which are responsible for the formation of adhesive failures and for achieving clinically more successful adhesive restorations.