An 11- to 15-year clinical outcome study of the Advance Medial Pivot total knee arthroplasty: pivot knee arthroplasty.

AIMS: The Advance Medial-Pivot total knee arthroplasty (TKA) was designed to reflect contemporary data regarding the kinematics of the knee. We wished to examine the long-term results obtained with this prosthesis by extending a previous evaluation. PATIENTS AND METHODS: We retrospectively evaluated prospectively collected data from 225 consecutive patients (41 men and 184 women; mean age at surgery 71 years, 52 to 84) who underwent 284 TKAs with a mean follow-up of 13.4 years (11 to 15). Implant failure, complication rate, clinical (both subjective and objective) and radiological outcome were assessed. Pre- and post-operative clinical and radiographic data were available at regular intervals for all patients. A total of ten patients (4.4%; ten TKAs) were lost to follow-up. RESULTS: Survival analysis at 15 years showed a cumulative success rate of 97.3% (95% confidence interval (CI) 96.7 to 97.9) for revision for any reason, of 96.4% (95% CI 95.2 to 97.6) for all operations, and 98.8% (95% CI 98.2 to 99.4) for aseptic loosening as an end point. Three TKAs (1.06%) were revised due to aseptic loosening, two (0.7%) due to infection, one (0.35%) due to instability and one (0.35%) due to a traumatic dislocation. All patients showed a statistically significant improvement on the Knee Society Score (p = 0.001), Western Ontario and McMaster University Osteoarthritis Index (p = 0.001), Short Form-12 (p = 0.01), and Oxford Knee Score (p = 0.01). A total of 207 patients (92%) were able to perform age appropriate activities with a mean flexion of the knee of 117° (85° to 135°) at final follow-up. CONCLUSION: This study demonstrates satisfactory functional and radiographic long-term results for this implant. Cite this article: Bone Joint J 2016;98-B:1050-5.

Acetabular reconstruction in patients with low and high dislocation: 20- to 32-year survival of an impaction grafting technique (named cotyloplasty).

We report the results at a mean of 24.3 years (20 to 32) of 61 previously reported consecutive total hip replacements carried out on 44 patients with severe congenital hip disease, performed with reconstruction of the acetabulum with an impaction grafting technique known as cotyloplasty. The mean age of the patients at operation was 46.7 years (23 to 68) and all were women. The patients were followed post-operatively for a mean of 24.3 years (20 to 32), using the Merle d'Aubigné and Postel scoring system as modified by Charnley, and with serial radiographs. At the time of the latest follow-up, 28 acetabular components had been revised because of aseptic loosening at a mean of 15.9 years (6 to 26), and one at 40 days after surgery because of repeated dislocations. The overall survival rate for aseptic failure of the acetabular component at ten years was 93.1% (95% confidence interval (CI) 86.5 to 96.7) when 53 hips were at risk, and at 23 years was 56.1% (95% CI 49.4 to 62.8), when 22 hips remained at risk. These long-term results are considered satisfactory for the reconstruction of an acetabulum presenting with inadequate bone stock and circumferential segmental defects.

Total knee replacement performed with either a mini-midvastus or a standard approach: a prospective randomised clinical and radiological trial.

We report the clinical and radiological results of a two- to three-year prospective randomised study which was designed to compare a minimally-invasive technique with a standard technique in total knee replacement and was undertaken between January 2004 and May 2007. The mini-midvastus approach was used on 50 patients (group A) and a standard approach on 50 patients (group B). The mean follow-up in both groups was 23 months (24 to 35). The functional outcome was better in group A up to nine months after operation, as shown by statistically significant differences in the mean function score, mean total score and the mean Oxford knee score (all, p = 0.05). Patients in group A had statistically significant greater early flexion (p = 0.04) and reached their greatest mean knee flexion of 126.5 degrees (95 degrees to 135 degrees ) 21 days after operation. However, at final follow-up there was no significant difference in the mean maximum flexion between the groups (p = 0.08). Technical errors were identified in six patients from group A (12%) on radiological evaluation. Based on these results, the authors currently use minimally-invasive techniques in total knee replacement in selected cases only.

Asporin and knee osteoarthritis in patients of Greek origin.

Ostearthritis (OA) is characterized by focal areas of loss of the articular cartilage in synovial joints, associated with varying degrees of osteophyte formation, subchondral bone change and synovitis. The Asporin (ASPN) gene which encodes a protein of the extracellular cartilage matrix contains a triplet repeat encoding for aspartic acid (D) within exon 2 The D14 allele was found associated with knee and hip osteoarthritis in case-control study in the Japanese population. Genotyping Greek knee OA patients for the D repeats we determined that the D15 allele could be considered a risk allele for our population.

Interleukin-10G and interleukin-10R microsatellite polymorphisms and osteoarthritis of the knee.

OBJECTIVE: To clarify and evaluate the possible role of interleukin-10G (IL-10G) and interleukin-10R (IL-10R) microsatellite polymorphisms of IL-10 gene in knee osteoarthritis (OA). METHODS: This was a case-control study. Our population consisted of 132 patients with primary knee osteoarthritis who had undergone total knee replacement (TKR) and 165 unaffected controls. Peripheral blood was used to extract genomic DNA and the IL-10G and IL-10R polymorphisms were examined by a polymerase chain reaction (PCR)-based method and were analyzed using an automated DNA analysis method. RESULTS: A significant difference in the genotype distribution between OA individuals and controls was observed for IL-10G gene. Individuals with LL genotype were found to have almost 4 times greater possibility for knee OA than the ones with SS genotype (p = 0.001). OA patients had a significantly higher mean number of CA repeats for IL-10G gene than controls (p = 0.007). No significant differences in allelic frequencies between OA patients and controls were found for IL-10R gene. CONCLUSION: An association between IL-10G microsatellite polymorphisms and idiopathic knee OA was found in subjects of Greek descent.

Association of repeat polymorphisms in the estrogen receptors alpha, beta, and androgen receptor genes with knee osteoarthritis.

Genetic factors have been shown to play an important role in the etiology of osteoarthritis (OA). To elucidate the possible role of genetic variation in the estrogen receptors alpha and beta (ER-alpha, ER-beta) and androgen receptor (AR) genes with knee OA, the -1174(TA)(n), c.1092+3607(CA)(n), and c.172(CAG)(n) repeat polymorphisms of ER-alpha, ER-beta, and AR genes were studied. A case-control cohort of 158 patients with idiopathic knee OA and 193 controls were used. A significant difference was observed in the frequency distribution of -1174(TA)(9-25) and c.1092+3607(CA)(13-27) repeat polymorphisms of the ER-alpha and ER-beta genes between OA patients and controls (p<0.005 and p<0.0001, respectively). A significantly increased odds ratio (OR) for knee OA was observed in individuals having long alleles (LL) genotype for ER-alpha gene and LL and one short and one long allele (SL) genotypes for ER-beta gene compared to individuals with the short alleles (SS) genotype (95% CI 1.03-3.5; p=0.04 and CI 2.4-8.3 and 2.5-7.5; p < 0.001, respectively). When ORs were adjusted for various risk factors, it was observed that women with LL genotypes for ER-beta and AR genes showed significantly increased risk for OA development (p=0.002 and 0.001). An association between c.1092+3607(CA)(13-27) and c.172(CAG)(8-34) repeat polymorphisms of the ER-beta and AR genes and knee OA was found in individuals of Greek descent.

Morphometric changes in the epiphyseal plate of the growing and young adult male rat after long-term salmon calcitonin administration.

The function of the epiphyseal plate is related to the differentiation and maturation of the chondrocytes, especially of the hypertrophic zone. Salmon calcitonin exerts a positive effect on chondrocytes of different types of cartilage, e.g., articular cartilage, osteochondral callus formation, and the epiphyseal plate. In the present study, the effect of long-term daily salmon calcitonin treatment upon epiphyseal plate function was examined in 80 male Wistar rats aged 12 weeks at the beginning of the experiment. A daily dose of 6 IU of salmon calcitonin enhanced the number of the chondrocytes of the hypertrophic zone of the upper tibial epiphyseal plate, increased the mean thickness of the epiphyseal plate, and accelerated the longitudinal growth of long bones. It was found that the peripheral growth of the epiphyseal plate was delayed after calcitonin treatment in comparison with the placebo-treated animals. The most effective period for calcitonin treatment on epiphyseal plate function seems to be the late accelerated period of growth, i.e., puberty. In conclusion, long-term salmon calcitonin treatment has a beneficial effect on longitudinal skeletal growth and this effect remains throughout the adult life of the animal. Salmon calcitonin does not enlarge the surface of the epiphyseal plate.

Failure analysis of two Ti-alloy total hip arthroplasty femoral stems fractured in vivo.

Failure of total hip arthroplasty femoral stems is a serious clinical complication. Even modern metal alloys and designs sometimes suffer such incidents. The reported study aimed at the investigation of the reasons leading the in vivo fracture of two Ti6Al4V femoral stems. Stems were retrieved during revision surgery approximately 2 years postoperatively. Examination and analysis included XRF spectrometry for identification of chemical composition, macroscopic examination and topographical measurements, SEM study of fracture surfaces, study of alloy microstructure by optical microscopy, and finally measurement of mechanical properties by means of tensile testing conducted on alloy samples machined from the stems themselves. Macroscopic examination and measurements showed close topographical similarity between the two fractures. XRF spectrometry, tensile testing, and microstructure analysis identified the alloy as a typical Ti6Al4V surgical titanium alloy. During SEM analysis the fracture surfaces exhibited characteristic fatigue striations tidally running on the cross sections, which were considered as the weakest ones regarding toward geometry and stress concentration. Fracture in both stems occurred due to fatigue along these cross sections.