Rational Integration of ZIF-8 and BiPO4 for Energy Storage and Environmental Applications.

Environmental pollution and energy storage are among the most pivotal challenges of today's world. The development of multifunctional materials is required to address these challenges. Our study presents the rational design and synthesis of a hybrid material (ZIF-8@BiPO4) with dual functionality: an outstanding supercapacitor electrode and an excellent photocatalyst. The ZIF-8@BiPO4 hybrid structure was obtained by conjoining zinc ions and 2-methylimidazole ligands toward BiPO4 by a one-pot stirring route at room temperature. The ZIF-8@BiPO4 resulted in considerably higher specific capacitance (Cs) (489 F g-1 at a scan rate of 5 mV s-1; 497 F g-1 at a current density of 1 A g-1) than that of pure BiPO4 (358; 443 F g-1) and ZIF-8 (185; 178 F g-1) under the same conditions in a three-electrode cell using the 2 M KOH aqueous electrolyte. Afterward, an asymmetric supercapacitor (ASC) device was fabricated with BiPO4 as the anode and ZIF-8@BiPO4 as the cathodes, acquiring an outstanding Cs of 255 F g-1 at a current density of 0.5 A g-1 with significant cycling stability (81% over 10,000 cycles). Moreover, the ASC has an energy density of 17.5 Wh kg-1and a power density of 13,695 W kg-1, which can be considered to be at the borderline between batteries and supercapacitors. The photocatalytic activity of ZIF-8@BiPO4 was further studied using a methylene blue (MB) dye and sildenafil citrate (SC) drug-active molecules. The degradation of MB was approximately 78% through the photocatalytic reduction after 180 min of UV irradiation. The outstanding characteristics together with the ecofriendly and low-cost preparation make ZIF-8@BiPO4 appealing for a broad range of applications.

Nanostructures for the Prevention, Diagnosis, and Treatment of SARS-CoV-2: A Review.

Scientists, doctors, engineers, and even entire societies have become aware of the seriousness of the COVID-19 infection and are taking action quickly, using all the tools from protection to treatment against coronavirus SARS-CoV-2. Especially in this sense, scientific approaches and materials using nanotechnology are frequently preferred. In this review, we focus on how nanoscience and nanotechnology approaches can be used for protective equipment, diagnostic and treatment methods, medicine, and vaccine applications to stop the coronavirus SARS-CoV-2 and prevent its spread. SARS-CoV-2, which itself can be considered as a core-shell nanoparticle, can interact with various materials around it and remain bound for variable periods of time while maintaining its bioactivity. These applications are especially critical for the controlled use of disinfection systems. One of the most important processes in the fight against coronavirus is the rapid diagnosis of the virus in humans and the initiation of isolation and treatment processes. The development of nanotechnology-based test and diagnostic kits is another important research thrust. Nanotechnological therapeutics based on antiviral drug design and nanoarchitecture vaccines have been vital. Nanotechnology plays critical roles in the production of protective film surfaces for self-cleaning and antiviral masks, gloves, and laboratory clothes. An overview of literature studies highlighting nanotechnology and nanomaterial-based approaches to combat SARS-CoV-2 is presented.

Antibacterial, Antiviral, and Self-Cleaning Mats with Sensing Capabilities Based on Electrospun Nanofibers Decorated with ZnO Nanorods and Ag Nanoparticles for Protective Clothing Applications.

The COVID-19 pandemic has clearly shown the importance of developments in fabrication of advanced protective equipment. This study investigates the potential of using multifunctional electrospun poly(methyl methacrylate) (PMMA) nanofibers decorated with ZnO nanorods and Ag nanoparticles (PMMA/ZnO-Ag NFs) in protective mats. Herein, the PMMA/ZnO-Ag NFs with an average diameter of 450 nm were simply prepared on a nonwoven fabric by directly electrospinning from solutions containing PMMA, ZnO nanorods, and Ag nanoparticles. The novel material showed high performance with four functionalities (i) antibacterial agent for killing of Gram-negative and Gram-positive bacteria, (ii) antiviral agent for inhibition of corona and influenza viruses, (iii) photocatalyst for degradation of organic pollutants, enabling a self-cleaning protective mat, and (iv) reusable surface-enhanced Raman scattering substrate for quantitative analysis of trace pollutants on the nanofiber. This multi-functional material has high potential for use in protective clothing applications by providing passive and active protection pathways together with sensing capabilities.

Synthesis of Ag and TiO2 modified polycaprolactone electrospun nanofibers (PCL/TiO2-Ag NFs) as a multifunctional material for SERS, photocatalysis and antibacterial applications.

In this study, we reported the design and the fabrication of Ag and TiO2 modified polycaprolactone (PCL) electrospun nanofiber (NF) mats. The as-prepared NF mats were fabricated by one-step electrospinning and it was exploited for three different purposes (i) reusable SERS substrate for quantitative analysis to trace organic pollutants, (ii) photocatalyst for degradation of organic pollutants and (iii) antibacterial agent for killing of bacteria. Three different nanofiber mats, PCL, PCL-TiO2, PCL/TiO2-Ag NFs. were fabricated and further investigated. The morphologies and structures of the as-prepared nanofiber mats were carried out using X-ray diffraction spectroscopy (XRD), field emission scanning electron microscopy (FE-SEM), energy-dispersive X-ray spectroscopy (EDX) and fourier transform infrared spectroscopy (FT-IR) techniques. PCL/TiO2-Ag NFs served as a highly effective SERS platform with a detection limit of 10 nM for the detection of methylene blue dye (MB). A remarkable feature of the presented platform is the ability to reuse the PCL/TiO2-Ag NFs for SERS analysis of MB; availing from its capability for self-cleaning under UV light. By employing PCL/TiO2-Ag NFs nanocatalyst, complete photocatalytic degradation of the probe analytes MB and ibuprofen (Ibu) under UV irradiation was accomplished not more than 180 min. Moreover, PCL/TiO2-Ag NF mats showed a highly promising bactericidal feature against gram-negative Escherichia coli and gram-positive Staphylococcus aureus bacteria, which immensely emerged due to the presence of Ag NPs. This new trending nanofiber is assumed to lead a bunch of changes in the field of photocatalytic, SERS and antibacterial studies.