Injury patterns and outcomes in bicycle-related maxillofacial traumata: A retrospective analysis of 162 cases.

The objective of the current study is to retrospectively evaluate cycling related dental and maxillofacial injuries and to gain insight into the epidemiology and results of these accidents. Data of patients who were admitted due to the maxillofacial injuries between April 2018 and September 2020 were retrospectively evaluated regarding the patients' characteristics, helmet wearing, type of radiological assessment required for diagnosis and therapy, injury patterns, duration of hospitalization and concomitant injuries. Data of 162 patients were included. 86 (53.08%) patients presented with at least one maxillofacial fracture. A total of 186 maxillofacial bones were fractured. Zygomatico-maxillary complex was the most commonly affected region (n:103, 55,36%). Analysis of the dental traumata revealed that crown fracture without pulp exposure was the most commonly observed entity (n:37, 32.46%) and upper central incisors (n:61, 53.50%) were the most commonly affected teeth. The overall ratio of the number of the fracture line/fracture case was 2.80. However, this ratio was statistically higher in e-bike cases (4.25) compared to non-e-bike riders (2.34) (p:0.014). Bicycle related maxillofacial injuries could correlate with specific morbidity rates and result in severe injuries of the maxillofacial region.

Comparative Assessment of the Primary Stability of Straumann BLX Implant Design Using an In Vitro Sinus Lift-Simultaneous Implant Insertion Model.

Straumann BLX is a novel implant system that has been proclaimed to provide an ideal primary stability in all types of bone. In the current study, the primary stability of the Straumann BLX implant systems with Straumann tapered effect (TE) implants have been comparatively assessed in bovine ribs by using a simultaneous sinus elevation and implant insertion model. In the study group, BLX (4.0 × 12 mm), TE (4.1 × 12 mm), BLX (4.5 × 12 mm), and TE (4.8 × 12 mm) were placed in each bony window, which resembles the sinus maxillaris. As a control, BLX and TE implants with the same sizes were inserted into the proximal diaphysis of the bovine ribs. A total of 40 implant insertions were performed. Stability was measured with resonance frequency analysis. In the study group, 4.8-mm TE implants showed significantly higher values compared with 4.5-mm BLX implants (P = .116). However, 4.0-mm BLX implants in the control group showed higher stability compared with 4.0-mm-diameter TE (P = .014). The primary stability of the BLX implants in the control group was significantly higher compared with the experimental group in both widths (P= .018 for BLX 4.0 mm and P = .002 for BLX 4.5 mm, respectively). The use of the TE design with a wide diameter in simultaneous implant placement with sinus lift could present higher implant stability quotient values and might be a more appropriate option for implant recipient sites with poor bone volume and quality. However, the advantage of BLX design in standard implant insertion protocols could be of value.

The Impact of COVID-19 Vaccination on Anxiety Levels of Turkish Dental Professionals and Their Attitude in Clinical Care: A Cross-Sectional Study.

BACKGROUND: The current study aimed to assess the anxiety and fear levels and the attitude towards clinical care, such as the use of personal protective equipment and number of patients examined, before and after COVID-19 vaccination among Turkish dental professionals. METHODS: A questionnaire including socio-demographical characteristics and clinical data regarding the number of patients, the use of personal protective equipment, vaccine confidence interval, positive or negative COVID-19 diagnosis, and fear and anxiety levels were examined. RESULTS: A total of 475 dentists (196 men and 279 women) participated. Overall, the vaccination had a positive effect on the decrease of fear and anxiety levels of dental professionals. It was observed that the number of interventional procedures significantly increased after vaccination. Besides that, the amount of personal protective equipment used in patients, especially after the vaccination, has decreased. CONCLUSION: Despite the positive effects of vaccination on the anxiety levels of dental professionals, protective measurements should further be the main concern, regardless of the vaccination status of both the dental professional and the patient.

An experimental study on the effects of the cortical thickness and bone density on initial mechanical anchorage of different Straumann® implant designs.

BACKGROUND: The aim of the current study was to comparatively assess the primary stability of different Straumann® implant designs (BLX, Straumann Tapered Effect, Bone Level Tapered, and Standard Plus) via resonance frequency analysis by using an implant insertion model in freshly slaughtered bovine ribs with and without cortical bone. Tapered Effect (4.1 × 10 mm), Bone Level Tapered (4.1 × 10 mm), Standard Plus (4.1 × 10 mm), and BLX (4.0 × 10 mm) implants were inserted into the distal epiphysis on the longitudinal axis of the freshly slaughtered bovine ribs. As a control, implants with the same sizes were inserted into the proximal diaphysis. The stability of the implants was examined with resonance frequency analysis. RESULTS: BLX and Tapered Effect implants showed higher implant stability quotient values in both study and control groups. All implant systems showed a significant decrease of mechanical anchorage in the study group. BLX and Bone Level Tapered designs had a significantly lower loss of mechanical anchorage in the lack of cortical bone. CONCLUSION: Both Tapered Effect and BLX designs could ensure sufficient initial stability; however, BLX implants could be an appropriate option in the lack of cortical bone and poor bone quality at the implant recipient site. CLINICAL RELEVANCE: BLX is a novel implant system, which could be especially beneficial in the presence of spongious bone type at posterior maxillae.

Marine Algae Incorporated Polylactide Acid Patch: Novel Candidate for Targeting Osteosarcoma Cells without Impairing the Osteoblastic Proliferation.

Biodegradable collagen-based materials have been preferred as scaffolds and grafts for diverse clinical applications in density and orthopedy. Besides the advantages of using such bio-originated materials, the use of collagen matrices increases the risk of infection transmission through the cells or the tissues of the graft/scaffold. In addition, such collagen-based solutions are not counted as economically feasible approaches due to their high production cost. In recent years, incorporation of marine algae in synthetic polymers has been considered as an alternative method for preparation grafts/scaffolds since they represent abundant and cheap source of potential biopolymers. Current work aims to propose a novel composite patch prepared by blending Sargassum vulgare powders (SVP) to polylactide (PLA) as an alternative to the porcine-derived membranes. SVP-PLA composite patches were produced by using a modified solvent casting method. Following detailed material characterization to assess the cytocompatibility, human osteoblasts (HOBs) and osteosarcoma cells (SaOS-2) were seeded on neat PLA and SVP-PLA patches. MTT and BrdU assays indicated a greater cytocompatibility and higher proliferation for HOBs cultured on SVP-PLA composite than for those cultured on neat PLA. SaOS-2 cells cultured on SVP-PLA exhibited a significant decrease in cell proliferation. The composite patch described herein exhibits an antiproliferative effect against SaOS-2 cells without impairing HOBs' adhesion and proliferation.

Six-year clinical outcomes of implant-supported acrylic vs. ceramic superstructures according to the All-on-4 treatment concept for the rehabilitation of the edentulous maxilla.

The aim of the current study was to document the long-term clinical results of the use of two prosthetic techniques for the rehabilitation of completely edentulous maxillae according to the "All-on-Four" concept: Fixed, screw-retained prosthesis mounted on a chrome-molybdenum framework with (1) metal-ceramic veneers and (2) Acrylic prosthesis with acrylic resin prosthetic teeth. A total of 34 patients were assigned to subgroups according to their own preference of the superstructure type (ceramics [n: 17] or acrylic resin [n: 17]). Prosthetic complications, marginal bone loss, plaque accumulation, bleeding on probing, bite force and oral-health-related quality of life were assessed over a period of 6 years. Marginal bone loss around implants of the ceramic group remained well within the limits for 'success', as defined by the 2007 Pisa consensus over the time (1.43 ± 0.35 mm). However, marginal bone loss was significantly more pronounced around the implants in the acrylic group (2.15 ± 0.30) and the difference between two groups was statistically significant (p: 0.00). Bleeding on probing and plaque accumulation showed also positive correlation with marginal bone loss. Both acrylic and ceramic suprastructures appeared to be equivalent after 6 years; however, ceramic suprastructures revealed superior clinical results in terms of bone loss and plaque accumulation. Current study determines the long-term clinical outcomes of different prosthetic management alternatives in All-on-Four and aids to increase dental professionals' ability to meet the patients' expectations.

Awareness and Knowledge of SARS-CoV-2 Infection among Dental Professionals According to the Turkish National Dental Guidelines.

The objective of the current survey was to assess the awareness of the dental professionals according to the principals described by the Turkish Dental Association (TDA). A questionnaire including the socio-demographic data, specialties/academic degree, institutions/affiliations, the knowledge about COVID-19, the number of patients examined and dental treatments performed during the COVID-19 pandemic, the knowledge of protection based on the guidelines described by TDA, contamination with COVID-19 and the psychological complaints has been used. A total of 947 (63.1%) dentists enrolled the study. The results showed satisfactory knowledge about the COVID-19 etiology, mode of transmission and the pre-procedural cautions as the majority of them had a fair level of knowledge with significantly higher knowledge among specialized respondents. The participants have also recorded a good judgment towards performing the emergency dental treatment during the current COVID-19 pandemic which corresponds with the guidelines determined by TDA. Considering the updates on the transmission of COVID-19 and protective strategies, there is an urgent need for improvement of dentists' knowledge about risk assessment via training programs. The incidence of positive testing among dental professionals also necessitates immediately testing of asymptomatic Turkish dental professionals.

Initiated Chemical Vapor Deposition (iCVD) Functionalized Polylactic Acid-Marine Algae Composite Patch for Bone Tissue Engineering.

The current study aimed to describe the fabrication of a composite patch by incorporating marine algae powders (MAPs) into poly-lactic acid (PLA) for bone tissue engineering. The prepared composite patch was functionalized with the co-polymer, poly (2-hydroxyethyl methacrylate-co-ethylene glycol dimethacrylate) (p(HEMA-co-EGDMA)) via initiated chemical vapor deposition (iCVD) to improve its wettability and overall biocompatibility. The iCVD functionalized MAP-PLA composite patch showed superior cell interaction of human osteoblasts. Following the surface functionalization by p(HEMA-co-EGDMA) via the iCVD technique, a highly hydrophilic patch was achieved without tailoring any morphological and structural properties. Moreover, the iCVD modified composite patch exhibited ideal cell adhesion for human osteoblasts, thus making the proposed patch suitable for potential biomedical applications including bone tissue engineering, especially in the fields of dentistry and orthopedy.

A retrospective analysis of the surgical outcomes of different free vascularized flaps used for the reconstruction of the maxillofacial region: Hand-sewn microvascular anastomosis vs anastomotic coupler device.

The aim of the study was to assess the surgical outcomes following venous anastomosis with a coupling device and hand-sewn anastomosis in the reconstruction of the maxillofacial region. The study sample was recruited from patients who underwent reconstructive surgeries between January 2011 and November 2016. Tumor type, recipient veins, distribution of flap type, flap survival rates and anastomosis associated complications requiring a flap revision were documented. The follow-up period was four years. In total, 236 patients were included in this study, in which 201 reconstructions were performed via microsurgical venous coupling device (82.04%), whereas hand sewn anastomosis was used in 44 patients (17.96%). Postoperative complications regarding the anastomosis technique revealed that venous coupler devices showed significantly lower complications (4,97%) compared to hand sewn anastomosis (11,36%) (p < 0.05). Within the limitations of the current study, it can be concluded that the coupler system does appear to have advantages over conventional hand-sewn venous anastomosis and should be preferred when possible.

Combining platelet rich fibrin with different bone graft materials: An experimental study on the histopathological and immunohistochemical aspects of bone healing.

AIM: The current study was based on the hypothesis that the use of PRF with bone graft materials might increase bone regeneration and focus on the histopathological and immunohistochemical aspects following application of PRF with autogenous graft, xenograft and B-TCP in a rabbit model. MATERIAL AND METHODS: This study was performed on the twenty-eight male New Zealand divided into four group. Two defects with a diameter 10 mm were opened in calvarium. After PRF preparation, right defects were evaluated as empty defect or graft group, and left defects were evaluated as PRF test group. All animals were sacrificed at the end of 8 weeks and specimens were examined histopathologically and immunohistochemically. RESULTS: The most superior histopathological results were obtained in the autograft group. The combination of ß-TCP-PRF could not provide superiority over the ß-TCP group. The immunohistochemical results showed that, in the PRF/BTCP group, the expression of osteopontin and osteonectin was relatively higher compared to the only-BTCP group. CONCLUSION: In terms of new bone formation, autograft combined with PRF yielded superior results but the combination of ß-TCP-PRF had no effect compared to the only-BTCP group. However, further experimental and clinical studies might be beneficial to clarify the exact mechanism and results of combining PRF with bone grafts on bone healing process.