Effect of surface gallium termination on the formation and emission energy of an InGaAs wetting layer during the growth of InGaAs quantum dots by droplet epitaxy.

Self-assembled quantum dots (QDs) based on III-V semiconductors have excellent properties for applications in quantum optics. However, the presence of a 2D wetting layer (WL) which forms during the Stranski-Krastanov growth of QDs can limit their performance. Here, we investigate WL formation during QD growth by the droplet epitaxy technique. We use a combination of photoluminescence excitation spectroscopy, lifetime measurements, and transmission electron microscopy to identify the presence of an InGaAs WL in these droplet epitaxy QDs, even in the absence of distinguishable WL luminescence. We observe that increasing the amount of Ga deposited on a GaAs (100) surface prior to the growth of InGaAs QDs leads to a significant reduction in the emission wavelength of the WL to the point where it can no longer be distinguished from the GaAs acceptor peak emission in photoluminescence measurements. However increasing the amount of Ga deposited does not suppress the formation of a WL under the growth conditions used here.

Quantitative Agreement between Electron-Optical Phase Images of WSe_{2} and Simulations Based on Electrostatic Potentials that Include Bonding Effects.

The quantitative analysis of electron-optical phase images recorded using off-axis electron holography often relies on the use of computer simulations of electron propagation through a sample. However, simulations that make use of the independent atom approximation are known to overestimate experimental phase shifts by approximately 10%, as they neglect bonding effects. Here, we compare experimental and simulated phase images for few-layer WSe_{2}. We show that a combination of pseudopotentials and all-electron density functional theory calculations can be used to obtain accurate mean electron phases, as well as improved atomic-resolution spatial distribution of the electron phase. The comparison demonstrates a perfect contrast match between experimental and simulated atomic-resolution phase images for a sample of precisely known thickness. The low computational cost of this approach makes it suitable for the analysis of large electronic systems, including defects, substitutional atoms, and material interfaces.

Finite element simulations of electrostatic dopant potentials in thin semiconductor specimens for electron holography.

Two-dimensional finite element simulations of electrostatic dopant potentials in parallel-sided semiconductor specimens that contain p-n junctions are used to assess the effect of the electrical state of the surface of a thin specimen on projected potentials measured using off-axis electron holography in the transmission electron microscope. For a specimen that is constrained to have an equipotential surface, the simulations show that the step in the projected potential across a p-n junction is always lower than would be predicted from the properties of the bulk device, but is relatively insensitive to the value of the surface state energy, especially for thicker specimens and higher dopant concentrations. The depletion width measured from the projected potential, however, has a complicated dependence on specimen thickness. The results of the simulations are of broader interest for understanding the influence of surfaces and interfaces on electrostatic potentials in nanoscale semiconductor devices.

In situ transmission electron microscopy of light-induced photocatalytic reactions.

Transmission electron microscopy (TEM) makes it possible to obtain insight into the structure, composition and reactivity of photocatalysts, which are of fundamental interest for sustainable energy research. Such insight can be used for further material optimization. Here, we combine conventional TEM analysis of photocatalysts with environmental TEM (ETEM) and photoactivation using light. Two novel types of TEM specimen holder that enable in situ illumination are developed to study light-induced phenomena in photoactive materials, systems and photocatalysts at the nanoscale under working conditions. The technological development of the holders is described and two representative photo-induced phenomena are studied: the photodegradation of Cu2O and the photodeposition of Pt onto a GaN:ZnO photocatalyst.

Efficient single photon detection by quantum dot resonant tunneling diodes.

We demonstrate that the resonant tunnel current through a double-barrier structure is sensitive to the capture of single photoexcited holes by an adjacent layer of quantum dots. This phenomenon could allow the detection of single photons with low dark count rates and high quantum efficiencies. The magnitude of the sensing current may be controlled via the thickness of the tunnel barriers. Larger currents give improved signal to noise and allow sub-mus photon time resolution.