Semiclathrate Hydrates in Tri-n-butylphosphine Oxide (TBPO)-Water and TBPO-Water-Methane Systems.

In the present work, we studied semiclathrate hydrates in the TBPO-H2O and TBPO-H2O-CH4 systems. The stoichiometry, temperature, and enthalpy of dissociation of TBPO semiclathrate hydrate crystals formed in the TBPO-H2O binary system were found to be TBPO·33.6 ± 0.9H2O, 280.0 K, and 253.1 ± 4.7 J g-1, respectively. The crystal structure determined by single crystal XRD analysis (150 K) was the orthorhombic with space group Pbam and unit cell parameters a = 19.9313(8) Å, b = 23.4660(7) Å, and c = 12.1127(5) Å. The structural stoichiometry is TBPO·34.5H2O. The TBPO guest molecules arrangement within the host water framework has been refined for the first time. The discrepancy between the analytically measured and structural stoichiometry is likely to be attributed to the structure defects, which cannot be revealed by the routine single-crystal XRD analysis. The methane capacity of TBPO + CH4 double hydrate was measured by the thermovolumetric method in the range 14.9-55.8 wt % TBPO aqueous solution at a methane pressure of 8.5 ± 0.5 MPa and temperature of 274 ± 1 and 286 ± 1 K. The maximum included methane volumes of 61.6-74.6 mL/g were observed for the TBPO + CH4 double hydrates synthesized from ∼26-30 wt % TBPO aqueous solutions. Powder X-ray diffraction measurements of the hydrate samples used in the thermovolumetric experiments revealed that the TBPO + CH4 double hydrate has the same structural characteristics as the simple TBPO hydrate. The study of the Raman spectra of the TBPO + CH4 double hydrate and TBPO simple hydrate showed that in the TBPO + CH4 double hydrate CH4 molecules selectively occupy the small D cages. The results of the present study did not confirm the earlier suggestion of the formation of several structural types of hydrates in the TBPO-H2O system. The obtained results indicate that the TBPO-H2O binary system has a potential for application in gas separation and as cold storage and transportation media.

Calorimetric and structural studies of tetrabutylammonium bromide ionic clathrate hydrates.

In the present work, characteristic properties of tetrabutylammonium bromide (TBAB) ionic clathrate hydrates structures were studied by single-crystal X-ray structure analysis. The structures of three different tetragonal TBAB ionic clathrate hydrates that were formed in our experiments were based on the same water lattice of tetragonal structure I (TS-I) differing in the ways of including bromide anions and arranging tetrabutylammonium cations. We demonstrated that (1) Br(-) can be included into the water lattice, replacing two water molecules, (2) the butyl group of the cation can be inserted not only in large T and P cavities but also in small D cavities of the water lattice TS-I, and (3) one of the reasons for polytypism of ionic clathrate hydrates on the basis of TS-I is the occurrence of alternative modes of arrangements of four-compartment cavities in adjacent layers of the water framework. The compositions of three TBAB ionic clathrate hydrates TBAB·38.1H2O, TBAB·32.5H2O, and TBAB·26.4H2O were determined by chemical analysis, and their enthalpies of fusion were measured by differential scanning calorimetry (DSC). From the obtained results, the enthalpies of the TBAB hydrate formation from TBAB and water were calculated thermodynamically.

Physicochemical and structural studies of clathrate hydrates of tetrabutylammonium polyacrylates.

In this work, physicochemical and structural studies have been carried out for semiclathrate hydrates of linear (un-cross-linked) and cross-linked tetrabutylammonium polyacrylates with different degrees of cross-linking of the polymeric guest molecules (n = 0.5, 1, 2, 3%) and different degrees of substitution of proton ions of carboxylic groups in poly(acrylic acid) for TBA cations (x = 1, 0.8, 0.6). The changes in the hydrates' stability and composition depending on the outlined parameters were examined in the course of phase diagram studies of the binary systems water-tetrabutylammonium polyacrylates using differential thermal analysis method and calorimetric measurements of fusion enthalpies of the hydrates. Phase diagram studies of the binary system water-linear tetrabutylammonium polyacrylate revealed the formation of four hydrates. Based on the data of chemical analysis of hydrate crystals the compositions of all hydrates have been determined. Single-crystal X-ray diffraction studies revealed a tetragonal structure, space group 4/m, and unit cell parameters are close for different hydrates and lie in the ranges a = 23.4289-23.4713 Å and c = 12.3280-12.3651 Å (150 K). The structure can be related to tetragonal structure I typical for the clathrate hydrates of tetraalkylammonium salts with monomeric anions. Powder X-ray diffraction analyses confirmed the identity of the above crystal structure to that of the hydrates with cross-linked tetrabutylammonium polyacrylates. The behavior of TBA polyacrylate hydrates under the pressure of methane was studied and quantitative assessment of the gas content in the hydrates was made using volumetric analysis method.

Calorimetric and X-ray studies of clathrate hydrates of tetraisoamylammonium polyacrylates.

The structure of clathrate hydrates with tetraisoamylammonium polyacrylate salt incorporated as guest has been studied in this work. Also, quantitative studies on the stability changes of the clathrate hydrates with different degrees of cross-linking of the guest polymer (varied from 0 to 3%) have been conducted. A single crystal X-ray diffraction study of a crystal of the hydrate with linear (uncross-linked) tetraisoamylammonium polyacrylate as guest reveals a hexagonal structure (space group P6m2, a = 12.15 A, c =12.58 A at 100 K) with 39 host framework water molecules per one guest monomeric unit. Powder X-ray diffraction analyses confirm the identity of the above crystal structure of the hydrate with linear guest polymer and the crystal structure of the hydrates with cross-linked guest (hexagonal, a = 12.25 A, c =12.72 A at 276 K). In order to quantitatively determine the stability differences of the hydrates with the included guests having various degrees of cross-linking of the anionic chain, a series of differential scanning calorimetry measurements of the fusion enthalpy of the hydrate samples has been carried out. On the basis of the results obtained, a structural model describing the decrease in the stability of the clathrate hydrates with tetraisoamylammonium polyacrylate guest as a function of the degree of cross-linking of the guest polymer has been suggested.