Application of line-scan CMOS camera in multi-beam heterodyne differential laser Doppler vibration sensor.

The possibility of using a line-scan digital CMOS camera as a photodetector in a multi-beam heterodyne differential laser Doppler vibration sensor has been investigated. Application of the line-scan CMOS camera allows for selection of a different number of beams for a particular application in the sensor design, and for a compact design of the sensor. It was demonstrated that a limitation of the maximum measured velocity caused by the camera limited line rate can be overcome by selecting the beams separation on the object and the value of shear between images on the camera.

Video-rate Raman-based metabolic imaging by Airy light-sheet illumination and photon-sparse detection.

Despite its massive potential, Raman imaging represents just a modest fraction of all research and clinical microscopy to date. This is due to the ultralow Raman scattering cross-sections of most biomolecules that impose low-light or photon-sparse conditions. Bioimaging under such conditions is suboptimal, as it either results in ultralow frame rates or requires increased levels of irradiance. Here, we overcome this tradeoff by introducing Raman imaging that operates at both video rates and 1,000-fold lower irradiance than state-of-the-art methods. To accomplish this, we deployed a judicially designed Airy light-sheet microscope to efficiently image large specimen regions. Further, we implemented subphoton per pixel image acquisition and reconstruction to confront issues arising from photon sparsity at just millisecond integrations. We demonstrate the versatility of our approach by imaging a variety of samples, including the three-dimensional (3D) metabolic activity of single microbial cells and the underlying cell-to-cell variability. To image such small-scale targets, we again harnessed photon sparsity to increase magnification without a field-of-view penalty, thus, overcoming another key limitation in modern light-sheet microscopy.

Multi-beam heterodyne laser Doppler vibrometer based on a line-scan CMOS digital camera.

Multi-beam laser Doppler vibrometers (MB-LDVs) have an advantage over scanning single-beam laser Doppler vibrometers (LDVs) due to the reduction in measurement time and their ability to measure non-stationary and transient events. However, the number of simultaneously interrogated points in current MB-LDVs is limited due to the complexity of the electronic hardware, which increases with the number of measurement channels. Recent developments of high-speed line-scan CMOS cameras suggest that their use in MB-LDVs can reduce the hardware complexity and increase the number of measurement channels. We developed a MB-LDV based on a digital line-scan CMOS camera that simultaneously measures vibrations on a linear array of 99 points. The experimental setup and performance of the developed MB-LDV are discussed in this paper.