Localised light delivery on melanoma cells using optical microneedles.

Light-based therapy is an emerging treatment for skin cancer, which has received increased attention due to its drug-free and non-invasive approach. However, the limitation of current light therapy methods is the inability for light to penetrate the skin and reach deep lesions. As such, we have developed a polylactic acid (PLA) microneedles array as a novel light transmission platform to perform in vitro evaluation regarding the effect of light therapy on skin cancer. For the first time, we designed and fabricated a microneedle array system with a height fixation device that can be installed in a cell culture dish and an LED array for blue light irradiation. The effect of the blue light combined with the microneedles on cell apoptosis was evaluated using B16F10 melanoma cells and analyzed by Hoechst staining. Our results demonstrate that blue light can be transmitted by microneedles to skin cells and effectively affect cell viability.

Synthesis of Fluorinated Polymers and Evaluation of Wettability.

Two kinds of fluorinated polymers were synthesized: an acrylate polymer having a fluorinated triethylene glycol as a pendant group (2a) and a fluoroalkyl acrylate polymer (2b). The contact angle of these fluorinated polymers against water, non-fluorinated alcohols and fluorinated alcohols were evaluated. As compared with the fluoroalkyl polymer (2b), fluoroethylene glycol polymer (2a) showed smaller contact angle against water and non-fluorinated alcohols. This supports the proposition that changing the alkyl chain into the ethylene glycol-type chain gave some interaction between etheric oxygen and water or non-fluorinated alcohols. In addition, fluoroalkyl acrylate polymer (2b) showed remarkably low values of critical surface tension.

Effect of aglycon structure on saccharide elongation by cells.

Alkyl N-acetyl-ß-D-glucosaminide (GlcNAc primers) with different aglycon moieties were synthesized and used to determine the effect of the aglycon structure on cellular saccharide elongation. Dodecyl N-acetyl-ß-D-glucosaminide (GlcNAc-C12), tridecan-7-yl N-acetyl-ß-D-glucosaminide (GlcNAc-2C6), and pentacosan-13-yl N-acetyl-ß-D-glucosaminide (GlcNAc-2C12) primers were synthesized by glycosylation of dodecan-1-ol, tridecan-7-ol, and pentacosan-13-ol, respectively, with peracetylglucosamine. These primers were introduced to mouse B16 melanoma cells to prepare glycolipids. After 48 h incubation, results showed that GlcNAc-C12 was elongated to give NeuAc-Gal-GlcNAc-C12. GlcNAc-2C6 was also elongated to afford Gal-GlcNAc-2C6 and NeuAc-Gal-GlcNAc-2C6. On the other hand, GlcNAc-2C12 primer was not elongated. Significantly, the results demonstrated that the amount of glycosylated product increased 1.5-times by modifying the aglycon structure of GlcNAc from C12 to 2 C6 despite having almost the same number of C-units.

Influence of passage number on glycosylation of alkyl lactosides by Madin-Darby canine kidney (MDCK) cells.

The cell function on saccharide biosynthesis can be evaluated by employing the saccharide primer method. This study demonstrated that the characteristics of Madin-Darby canine kidney (MDCK) cells changed in relation with passage number when 12-azidododecyl ß-lactoside (Lac-12N(3) primer) was incorporated into MDCK cells and afforded GM3-, GD3-, sialylparagloboside (SPG), and NeuAc-Gal-GlcNAc-Gal-GlcNAc-Lac-type oligosaccharides. By measuring the amount of glycosylated products from relatively early to late passage numbers, results showed that there was an appropriate passage number that optimized oligosaccharide production and that the higher passage number resulted to a decrease in oligosaccharide production. Moreover, results suggested that aside from sialyltransferase, the activity of several kinds of enzymes that control the amount of saccharide production was presumably affected depending upon the biological senescence.

Large scale biosynthesis of ganglioside analogues by RERF-LC-AI cells cultured in HYPERFlask.

The efficient production of ganglioside analogues was accomplished using RERF-LC-AI cells cultured in HYPERFlask (High Yield PERformance Flask). Eight kinds of ganglioside analogues (GM3, GM2, sialylparagloboside, GD3, di-sialylated lacto-N-tetraose, and another three kinds of analogues with intricate structures) were synthesized by the saccharide primer method using lung squamous-cell carcinoma line RERF-LC-AI and 12-azidododecyl ß-lactoside primer. The yield for each analogue obtained using HYPERFlask was higher than yields obtained from 100-mm dishes.

Immobilization of fluorous oligosaccharide recognized by influenza virus on polytetrafluoroethylene filter.

The lactoside with PEG-fluorous tag was introduced to BHK-21(C-13) cells to generate a GM3-type oligosaccharide (Siaα2-3Galß1-4Glc). The GM3-type oligosaccharide obtained was easily immobilized by spotting onto commercially available polytetrafluoroethylene (PTFE) filter through non-covalent fluorous affinity and simply assessed by dot blot method using the interaction of carbohydrate- with proteins which recognize sialic acid such as virus membrane proteins.

Easy production of a glycolipid analogue using animal cells in culture.

A glycolipid analogue, GM4-type ganglioside, was obtained by a combination of chemical synthesis and biosynthetic processes in animal cells with dodecyl beta-D-galactoside (Gal C12) as primer. The primer was conveniently prepared in two steps: glycosylation, followed by deacetylation. The primer was introduced to mouse melanoma B16 cells to serve as substrate for cellular, enzyme-catalyzed glycosylation. Incubation of the cells in the presence of the primer resulted in sialylation of the galactose residue to afford a GM4 analogue that was released from the cells to the culture medium. The strategy of preparation of the GM4 analogue described in this study is a viable alternative to the existing methods. The saccharide-primer method is fast, convenient, not requiring expensive enzymes and glycosyl donors, and highly stereoselective.

Rapid separation of gangliosides using strong anion exchanger cartridges.

A method utilizing strong anion exchanger cartridges (InertSep SAX) was developed to separate gangliosides. Total lipids extracted from rat brain is able to be rapidly separated into neutral and acidic lipids rapidly. Neutral lipids were passed through the SAX cartridge while acidic lipids adsorbed onto the cartridge and were eluted by chloroform/methanol/4.0 M aqueous ammonium acetate (5:10:1, by volume). Moreover, various kinds of gangliosides (GM1, GD1a, GD1b, GT1b) were separated individually according to their characteristics by elution with increasing concentration of ammnonium acetate (0 - 4.0 M). The gangliosides yield of this procedure was higher than 95%.

Purification by centrifugal partition chromatography of amphiphilic compounds, glycolipids and pseudo-glycolipids synthesized by using cells.

Centrifugal partition chromatography (CPC) was applied to separate amphiphilic glycolipids and pseudo-glycolipids synthesized by using cells. Neutral and acidic lipid fractions were isolated by CPC under suitable conditions respectively. Separation of neutral lipid, Gb3-type and Gb4-type oligosaccharide synthesized by using cells, was performed with a two-phase solvent system composed of chloroform-methanol-water at a volume ratio of 5:6:4. On the other hand, separation of acidic lipid, GM3-type oligosaccharide synthesized by using cells, and ganglioside extracted from rat brain were performed with a two-phase solvent system composed of butanol-ethanol-1% acetic acid at a volume ratio of 4:1:5. 8.3mg of Gb3 analogue, 5.1mg of Gb4 analogue, and 19.5mg of GM3 analogue were purified from 3.2l of culture medium obtained by incubation of African green-monkey kidney (Vero) cells with 50 microM n-dodecyl beta-lactoside using CPC.

Alternative methods of globotrioside production using Vero cells: a microcarrier system procedure.

BACKGROUND: Glycolipids are one component of cell membranes, and are found most prevalently at the surface of the plasma membrane. Animal cells take in amphipathic glycosides, which are later glycosylated after assimilation in biosynthetic pathways. Gycosylated glycosides are released outside of cells to the surrounding culture medium. This represents an accessible method of obtaining complex glycosides. RESULTS: Vero cells are sensitive to Shiga toxins and are known to express the glycosides globotriaosyl ceramide (Gb3) and globotetraosyl ceramide (Gb4) on the surface of the plasma membrane. By administering amphipathic lactosides to Vero cells, the above mentioned glycolipids could be produced by the action of cellular enzymes. In our study, the optimum conditions (seeded cell number, incubated time period, 12-azidododecyl lactoside concentration and medium volume) for the production of Gb3 analogue were investigated. The 87.9 microg/100 mm dish (11.7 % yield) Gb3 analogue was produced under appropriate conditions. The large-scale culture of Vero cells using a microcarrier culture method with repetitions produced about 30 mg of the Gb3 analogue. CONCLUSION: The mass production of glycosides in Vero cells was carried out on a microcarrier with repeated administration of 12-azidododecyl lactoside. The results indicated that the use of both a microcarrier culture and repetition were highly effective in the production of Gb3, Gb4 and sialyl lactoside (GM3) type-oligosaccharides.

Development of dialyzer with immobilized glycoconjugate polymers for removal of Shiga-toxin.

The dialyzer for Shiga-toxin elimination was developed and its performance was established. The dialyzer was prepared by immobilization of multivalent ligands. Glycoconjugate polymers having oligosaccharides and amino groups were synthesized to function as Shiga-toxin adsorbents. The amino group was utilized to immobilize the polymer inside the cellulose hollow fiber of the dialyzer. Cellulose hollow fibers packed in the dialyzer were carboxymethylated under moderate conditions. The glycoconjugate polymers were bound covalently to the hollow fibers of the dialyzer by condensation reaction between the amino group of the polymer and the carboxyl group of the cellulose hollow fiber. Shiga-toxin eliminabilities of the prepared dialyzers were evaluated at various conditions. Even at high concentration of protein such as FCS, the dialyzer showed an excellent performance for Shiga-toxin adsorption.

Efficient sialylation on azidododecyl lactosides by using B16 melanoma cells.

Lactoside primers (dodecyl lactoside derivatives) resemble intermediates in the biosynthetic pathway of glycolipids and, therefore, act as substrates for cellular enzyme-catalyzed glycosylation. To establish the optimal condition for the bioproduction of a large amount of valuable materials containing GM3-type oligosaccharides, two kinds of lactoside primers having the azido group in different positions were synthesized and introduced into B16 melanoma cells. The saccharide chains of both primers were elongated by cells to give GM3-type oligosaccharide derivatives, which were released to the culture medium. The amount of glycosylated product from newly synthesized 2-azidododecyl beta-lactoside (primer II) was almost twice that from 12-azidododecyl beta-lactoside (primer I). The effects of seeded cell number, primer concentration, and length of incubation time on the glycosylation efficiency were also investigated. The results showed that the higher the seeded cell number, the larger the amount of sialylated products obtained. The optimum concentrations of primers I and II were found to be 200 and 100 microM, respectively. Above these concentrations, productivity and cell viability decreased. As regards the length of incubation time, the sialylated products increased linearly until 48 h, but productivity did not advance thereafter. These results represent the optimal conditions that are necessary for the mass production of GM3-type oligosaccharide using azidododecyl lactoside primers and B16 cells.

Fluorous-tagged compound: a viable scaffold to prime oligosaccharide synthesis by cellular enzymes.

Fluorous-tagged saccharide primers could be viable scaffolds for the synthesis of oligosaccharides. This research demonstrates that a fluorine-containing saccharide derivative could actually be taken up by the cell, the saccharide chain elongated by cellular enzymes, and the elongated product released by the cells to the culture medium. A fluorous-tagged lactoside primer, 6-(perfluorohexyl)hexyl-4-O-(beta-D-galactopyranosyl)-beta-D-glucopyranoside, was chemically synthesized and introduced in mouse B16 cells to prime oligosaccharide synthesis. Uptake of the primer by B16 cells resulted in the sialylation of the terminal galactose residue to afford an oligosaccharide with the same glycan structure as ganglioside GM3. The presence of many fluorine atoms did not have any adverse effects to the cells. Moreover, the number of fluorine atoms did not pose a steric barrier and instead, their presence possibly increased the hydrophobicity of the primer and enhanced membrane permeability. This strategy of using a fluorous-tagged primer and cells can pave the way for an easier way of preparing oligosaccharides via an environment-friendly approach that eliminates the use of large amounts of organic solvents.