Cricothyroidotomy needle length is associated with posterior tracheal wall injury: A randomized crossover simulation study (CONSORT).

BACKGROUND: Cricothyroidotomy is the final strategy in the "cannot intubate, cannot oxygenate" scenario, but half of needle cricothyroidotomy attempts result in failure. The most frequent complication in needle cricothyroidotomy is posterior tracheal wall injury. We hypothesized that needle length is related to posterior wall injury and compared needle cricothyroidotomy with a commercial kit to a modified shorter needle to evaluate success and posterior wall injury rates. METHODS: The commercial kit has a needle stopper to prevent posterior wall injury, with a penetrating length of 25 mm. We made long stopper to shorten the length by 5 mm (net 20 mm penetrating length). Residents were recruited, received a lecture about cricothyroidotomy and practiced needle cricothyroidotomy using the commercial kit on a simulator. They then performed cricothyroidotomy using the commercial kit or the shorter needle on an ex-vivo porcine larynx covered with artificial skin. An intra-tracheal endoscope recorded the procedure. The video was evaluated for success/failure or posterior wall injury by independent evaluators. Larynxes with a distance from the outer surface to the inner lumen exceeding 13 mm were excluded. The distance in each larynx was measured by dissection after the study. Success and posterior wall injury rates were analyzed using Fisher exact test (P < .05 was statistically significant). RESULTS: Forty-seven residents participated in the study. Data for two residents were excluded. There was no statistically significant difference in success rate between the commercial kit (100%, 45/45) and the shorter needle (91%, 41/45, P = .12). Failure was defined if the needle tip did not reach the lumen in four trials. Cannulated but complicated by posterior wall injury occurred in 33% (15/45) with the commercial kit and 5% (2/43) with the shorter needle (P < .01). CONCLUSION: During needle cricothyroidotomy, force is needed for the needle to penetrate the cricothyroid ligament. The advancing needle sometimes cannot be stopped after penetrating the cricothyroid ligament. These data suggest that needle length is associated with posterior wall injury.

A high-fidelity simulator for needle cricothyroidotomy training is not associated with increased proficiency compared with conventional simulators: A randomized controlled study.

BACKGROUND: A high-fidelity task simulator for cricothyroidotomy was created using data from a 3-dimensional (3D) computed tomography scan using a 3D printer. We hypothesized that this high-fidelity cricothyroidotomy simulator results in increased proficiency for needle cricothyroidotomy compared with conventional simulators. METHODS: Cricothyroidotomy-naive residents were recruited and randomly assigned to 2 groups, including simulation training with a conventional simulator (Group C) and with a high-fidelity simulator (Group 3D). After simulation training, participants performed cricothyroidotomy using an ex vivo porcine larynx fitted with an endoscope to record the procedure. The primary outcomes were success rate and procedure time. The secondary outcome was a subjective measure of the similarity of the simulator to the porcine larynx. RESULTS: Fifty-two residents participated in the study (Group C: n = 27, Group 3D: n = 25). There was no significant difference in the success rate or procedure time between the 2 groups (success rate: P = .24, procedure time: P = .34). There was no significant difference in the similarity of the simulators to the porcine larynx (P = .81). CONCLUSION: We developed a high-fidelity simulator for cricothyroidotomy from 3D computed tomography data using a 3D printer. This anatomically high-fidelity simulator did not have any advantages compared with conventional dry simulators.

Comparative gene expression analysis of the amygdala in autistic rat models produced by pre- and post-natal exposures to valproic acid.

Gene expression profiles in the amygdala of juvenile rats were compared between the two autistic rat models for mechanistic insights into impaired social behavior and enhanced anxiety in autism. The rats exposed to VPA by intraperitoneal administration to their dams at embryonic day (E) 12 were used as a model for autism (E2IP), and those by subcutaneous administration at postnatal day (P) 14 (P14SC) were used as a model for regressive autism; both of the models show impaired social behavior and enhanced anxiety as symptoms. Gene expression profiles in the amygdala of the rats (E12IP and P14SC) were analyzed by microarray and compared to each other. Only two genes, Neu2 and Mt2a, showed significant changes in the same direction in both of the rat models, and there were little similarities in the overall gene expression profiles between them. It was considered that gene expression changes per se in the amygdala might be an important cause for impaired social behavior and enhanced anxiety, rather than expression changes of particular genes.

One-step detection of the 2009 pandemic influenza A(H1N1) virus by the RT-SmartAmp assay and its clinical validation.

BACKGROUND: In 2009, a pandemic (pdm) influenza A(H1N1) virus infection quickly circulated globally resulting in about 18,000 deaths around the world. In Japan, infected patients accounted for 16% of the total population. The possibility of human-to-human transmission of highly pathogenic novel influenza viruses is becoming a fear for human health and society. METHODOLOGY: To address the clinical need for rapid diagnosis, we have developed a new method, the "RT-SmartAmp assay", to rapidly detect the 2009 pandemic influenza A(H1N1) virus from patient swab samples. The RT-SmartAmp assay comprises both reverse transcriptase (RT) and isothermal DNA amplification reactions in one step, where RNA extraction and PCR reaction are not required. We used an exciton-controlled hybridization-sensitive fluorescent primer to specifically detect the HA segment of the 2009 pdm influenza A(H1N1) virus within 40 minutes without cross-reacting with the seasonal A(H1N1), A(H3N2), or B-type (Victoria) viruses. RESULTS AND CONCLUSIONS: We evaluated the RT-SmartAmp method in clinical research carried out in Japan during a pandemic period of October 2009 to January 2010. A total of 255 swab samples were collected from outpatients with influenza-like illness at three hospitals and eleven clinics located in the Tokyo and Chiba areas in Japan. The 2009 pdm influenza A(H1N1) virus was detected by the RT-SmartAmp assay, and the detection results were subsequently compared with data of current influenza diagnostic tests (lateral flow immuno-chromatographic tests) and viral genome sequence analysis. In conclusion, by the RT-SmartAmp assay we could detect the 2009 pdm influenza A(H1N1) virus in patients' swab samples even in early stages after the initial onset of influenza symptoms. Thus, the RT-SmartAmp assay is considered to provide a simple and practical tool to rapidly detect the 2009 pdm influenza A(H1N1) virus.

Exciton Primer-mediated SNP detection in SmartAmp2 reactions.

Most commonly used intercalating fluorescent dyes in DNA detection are lacking any sequence specificity, whereas so-called Exciton Primers can overcome this limitation by functioning as "sequence-specific dyes." After hybridization to complementary sequences, the fluorescence of Exciton Primers provides sequence-specific signals for real-time monitoring of amplification reactions. Applied to the SmartAmp2 mutation detection process, Exciton Primers show high signal strength with low background leading to a superior specificity and sensitivity compared to SYBR Green I. Signal strength can be further enhanced using multiple dyes within one Exciton Primer or use of multiple Exciton Primers in the same amplification reaction. Here we demonstrate the use of Exciton Primers for genotyping a single nucleotide polymorphism (SNP) in the VKORC1 locus (-1639G>A) relevant for Warfarin dosing as an example for Exciton Primers mediated genotyping by SmartAmp2. The genotyping assay can use only one labeled Exciton Primer for endpoint detection, or simultaneously by real-time monitoring detect wild-type and mutant alleles in a one-tube reaction using two Exciton Primers having different dyes. Working directly from blood samples, Exciton Primer mediated genotyping by SmartAmp2 offers superior solutions for rapid point-of-care testing.

Tail variation of the folding primer affects the SmartAmp2 process differently.

Folding primer (FP), together with turn-back primer (TP) and boost primer (BP), is one of the major components of SmartAmp2, a rapid amplification-based method for SNP detection. FP has a unique design where the annealing region is combined with a tail that can fold back. FP tails can be classified as either "strong" or "weak", depending on the melting temperature and free energy of the hairpin structure. We report that FP tails affect the amplification process differently; by changing the FP concentration, we can increase the amplification reaction speed with "strong tails". Unlike "strong tails", concentration change of FP with "weak tails" did not show significant impact on the amplification speed. The comparative analyses using gel electrophoresis demonstrate that the FP type and FP ratio in the reaction change the amplification pattern. The above observations can be used to optimize the reaction and manipulate the reaction speed of SmartAmp2.

Rapid single-nucleotide polymorphism detection of cytochrome P450 (CYP2C9) and vitamin K epoxide reductase (VKORC1) genes for the warfarin dose adjustment by the SMart-amplification process version 2.

BACKGROUND: Polymorphisms of the CYP2C9 (cytochrome P450, family 2, subfamily C, polypeptide 9) gene (CYP2C9*2, CYP2C9*3) and the VKORC1 (vitamin K epoxide reductase complex, subunit 1) gene (-1639G>A) greatly impact the maintenance dose for the drug warfarin. Prescreening patients for their genotypes before prescribing the drug facilitates a faster individualized determination of the proper maintenance dose, minimizing the risk for adverse reaction and reoccurrence of thromboembolic episodes. With current methodologies, therapy can be delayed by several hours to 1 day if genotyping is to determine the loading dose. A simpler and more rapid genotyping method is required. METHODS: We developed a single-nucleotide polymorphism (SNP)-detection assay based on the SMart Amplification Process version 2 (SMAP 2) to analyze CYP2C9*2, CYP2C9*3, and VKORC1 -1639G>A polymorphisms. Blood from consenting participants was used directly in a closed-tube real-time assay without DNA purification to obtain results within 1 h after blood collection. RESULTS: We analyzed 125 blood samples by both SMAP 2 and PCR-RFLP methods. The results showed perfect concordance. CONCLUSIONS: The results validate the accuracy of the SMAP 2 for determination of SNPs critical to personalized warfarin therapy. SMAP 2 offers speed, simplicity of sample preparation, the convenience of isothermal amplification, and assay-design flexibility, which are significant advantages over conventional genotyping technologies. In this example and other clinical scenarios in which genetic testing is required for immediate and better-informed therapeutic decisions, SMAP 2-based diagnostics have key advantages.

Rapid screening assay for KRAS mutations by the modified smart amplification process.

Previously, the smart amplification process version 2 (SMAP-2) was developed to detect mutations from tissue and in crude cell lysates and has been used for rapid diagnosis of specific somatic mutations with single-nucleotide precision. The purpose of this study was to develop a rapid and practical method to detect cancer and metastasis in specimens using the SMAP-2 assay. We developed modified SMAP-2 assays that enabled detection of any change in a single codon using a single assay. Rapid SMAP-2 screening assays are suitable for routine clinical identification of critical amino acid substitutions such as codon 12 mutations in KRAS. Primers bracketing the first two nucleotides of KRAS codon 12 were designed so that all possible alleles would be amplified by the SMAP-2 assay. In combination with the peptide nucleic acid (PNA) with exact homology to the wild-type allele, our assay amplified all mutant alleles except for the wild-type sequence. With this new assay design (termed PNA-clamp SMAP-2), we could detect KRAS mutations within 60 minutes, including sample preparation. We compared results from PNA-clamp SMAP-2 assay, polymerase chain reaction-restriction fragment length polymorphism, and direct sequencing of clinical samples from pancreatic cancer patients and demonstrated perfect concordance. The PNA-clamp SMAP-2 method is a rapid, simple, and highly sensitive detection assay for cancer mutations.

Use of a competitive probe in assay design for genotyping of the UGT1A1 *28 microsatellite polymorphism by the smart amplification process.

A key feature of the smart amplification process version 2 (SMAP-2) is the ability to suppress mismatch amplification by using a unique asymmetric primer design and Thermus aquaticus MutS (Taq MutS). However we report here that use of SMAP-2 for polymorphism determination of the UGT1A1 *28 allele required a further ancillary approach for complete background suppression. The UGT1A1 *28 allele is a microsatellite copy number polymorphism. This is the first reported SMAP-2 assay designed for genotyping genetic variations of microsatellites. We found that by the addition of a primer to the amplification reaction, called a competitive probe (CP), assay specificity could be significantly enhanced. Including sample preparation time and use of a CP-enhanced SMAP-2 assay, we could rapidly detect the UGT1A1 *28 polymorphism within 60 min. To test our method, we compared results from PCR sequencing and the CP-enhanced SMAP-2 assay on 116 human blood samples for UGT1A1 *28 polymorphism and demonstrated perfect concordance. These results illustrate the versatility of SMAP-2 for molecular diagnostics and provide a new approach for enhancing SMAP-2 assay specificity.

Rapid SNP diagnostics using asymmetric isothermal amplification and a new mismatch-suppression technology.

We developed a rapid single nucleotide polymorphism (SNP) detection system named smart amplification process version 2 (SMAP 2). Because DNA amplification only occurred with a perfect primer match, amplification alone was sufficient to identify the target allele. To achieve the requisite fidelity to support this claim, we used two new and complementary approaches to suppress exponential background DNA amplification that resulted from mispriming events. SMAP 2 is isothermal and achieved SNP detection from whole human blood in 30 min when performed with a new DNA polymerase that was cloned and isolated from Alicyclobacillus acidocaldarius (Aac pol). Furthermore, to assist the scientific community in configuring SMAP 2 assays, we developed software specific for SMAP 2 primer design. With these new tools, a high-precision and rapid DNA amplification technology becomes available to aid in pharmacogenomic research and molecular-diagnostics applications.