An efficient solid-phase strategy for the construction of chemokines.

Synthesis of chemokines via stepwise SPPS approaches has been shown to be a challenge. Herein, a complete study of different coupling methods, solvents and temperature combined with a continuous-flow synthesizer equipped with feedback monitoring was carried out. The results from this study indicate that this family of molecules can be prepared using an Fmoc/Bu(t) chemical approach and provide a general method to apply for the elongation of other difficult sequences.

Nsc and Fmoc Nalpha-amino protection for solid-phase peptide synthesis: a parallel study.

The 2-(4-nitrophenylsulfonyl)ethoxycarbonyl (Nsc) group is an alternative to Fmoc for Nalpha-protection in solid-phase peptide synthesis. Nsc-amino acids may be particularly suitable for automatic synthesizers, in which the amino acids are stored in solution, and the incorporation of residues prone to racemization such as Cys and His. Owing to the hydrophilicity of the Nsc group, these derivatives are useful for the preparation of protected peptides in convergent solid-phase peptide synthesis strategies.

Metallocyclopeptide complexes with MII(S.Cys)4 chromophores.

The tetracysteinyl peptide cyclo[Lys1,12](Gln-Cys-Gly-Val-Cys-Gly-Lys-Cys-Ile-Ala-Cys-Lys) ([symbol: see text] L(Cys.SH)4) was synthesized by solid-phase methods using an Fmoc/t-Bu/allyl strategy on a PAL-PEG-PS support. The formation of the 1:1 complexes with M = Fe2+, Co2+, and Ni2+ was observed by spectrophotometric monitoring of reactions in aqueous solution at pH 7.5. Size exclusion chromatography indicated that the peptide is a monomer and the complexes are dimers [M2([symbol: see text]L(Cys.S)4)2] in aqueous buffer at pH 7.5. Cobalt and nickel K-edge X-ray absorption data and EXAFS analysis of [Co2([symbol: see text] L(Cys.S)4)2] and [Ni2([symbol: see text] L(Cys.S)4)2] as lyophilized solids are reported. Derived bond distances are Co-S = 2.30 A and Ni-S = 2.21 A. From the collective results provided by absorption spectra, K-edges, EXAFS, and bond length comparisons with known structures, it is shown that [Fe2([symbol: see text] L(Cys.S)4)2] and [Co2([symbol: see text] L(Cys.S)4)2] possess distorted tetrahedral structures and [Ni2([symbol: see text] L(Cys.S)4)2] has distorted square planar stereochemistry. The Co(II) chromophore is particularly distinctive of the assigned structure, displaying three components of the parent tetrahedral ligand field transition 4A2-->4T1(P) (610, 685, 740 nm). The observed structures conform to the intrinsic stereochemical preferences of the metal ions. Structures for the binuclear complexes are suggested. These are the first characterized metal complexes of a cysteinyl cyclopeptide and among the few well-documented complexes of synthetic cyclopeptides. This study is a desirable first step in the design of cyclic peptides for the binding of mononuclear and polynuclear metal centers.

Strategies for the synthesis of labeled peptides.

Labeled peptides synthesized by core facilities are frequently used by researchers for following trafficking of a peptide, for binding studies, to determine substrate specificity, and for receptor cross-linking studies.The membership of the Association of Biomolecular Resource Facilities was asked to participate in a study focusing on synthesis of a biotin-labeled peptide, and it was suggested that a new strategy, using Rink amide 4-methylbenzhydrylamine resin coupled with Fmoc-Lys(Dde)-OH, be used.This strategy can be used for addition of a variety of labels other than biotin and should prove useful to core facilities. Comparison of the new strategy to other strategies was performed. Biotin labeling has long been assumed to be routine and specific. Despite the assumed routine nature of synthesizing biotinylated peptides, 9 of the 34 samples submitted did not contain any of the correct product. Although synthesis using Fmoc-Lys(Dde)-OH plus biotin generally gave the highest yields, other approaches also yielded a high percentage of the correct product.Therefore, the various strategies are generally comparable. The major advantage of this new approach is that other labels such as fluorescein, dansyl groups, methyl coumarin, and potentially fluorophores and quenchers used for fluorescence resonance energy transfer (FRET) can be directly incorporated into peptides.

Study on the synthesis and characterization of peptides containing phosphorylated tyrosine.

Phosphorylation and dephosphorylation are key events in receptor-mediated and post-receptor-mediated signal transduction. Synthetic phosphopeptides have been shown to have dramatic agonist or antagonist effects in several of these signaling pathways. For its 1997 study, the Association of Biomolecular Resource Facilities (ABRF) Peptide Synthesis Research Group assessed the ability of member laboratories to synthesize phosphotyrosine peptides. Participating laboratories were requested to synthesize and submit the following crude peptide, H-Glu-Asp-Tyr-Glu-Tyr(PO3H2)-Thr-Ala-Arg-Phe-NH2, for evaluation by amino acid analysis, sequence analysis, RP-HPLC, MALDI-TOF and ESI mass spectrometry. Prior to analysis of submitted peptides from ABRF members, the Peptide Synthesis Research Group synthesized and characterized the nonphosphorylated form of the peptide, the doubly phosphorylated form and the peptides singly phosphorylated on either the first or the second tyrosine. These peptide standards were separated easily by HPLC and capillary electrophoresis and the phosphotyrosine was detected readily by Edman degradation sequence analysis. No differences were seen by amino acid analysis and the expected masses were observed by mass spectrometry. The two singly phosphorylated peptides were easily distinguished by MALDI-PSD. Analysis of the peptides submitted from member facilities revealed that all but four of the 33 samples contained the correct product as determined by HPLC and mass spectrometry. HPLC analysis indicated that 20 of the 33 submitted samples contained greater than 75% correct product, five contained less than 50% correct product and four did not contain any correct product. By ESI/MS, an additional singly charged ion at m/z 535.5 was detected in five of the 33 submitted samples; this ion was subsequently shown to represent Ac-TARF-NH2. No correlation was found to exist between coupling time and percentage correct product; however, a correlation may exist between a greater percentage of correct product and the use of non-protected phosphotyrosine.

"High-load" polyethylene glycol-polystyrene (PEG-PS) graft supports for solid-phase synthesis.

The choice of a polymeric support is a key factor for the success of solid-phase methods for syntheses of organic compounds and biomolecules such as peptides and oligonucleotides. Classical Merrifield solid-phase peptide synthesis (SPPS), performed on low cross-linked hydrophobic polystyrene (PS) beads, sometimes suffers from sequence-dependent coupling difficulties. The concept of incorporating polyethylene glycol (PEG) into supports for solid-phase synthesis represents a successful approach to alleviating such problems. Previous reports from our laboratories have shown the advantages of "low-load" PEG-PS (0.15-0.25 mmol/g) for SPPS. Herein, we demonstrate that the beneficial aspects of the PEG-PS concept can be extended with resins that have higher loadings (0.3-0.5 mmol/g).

Optimization of the synthesis of peptide combinatorial libraries using a one-pot method.

Conditions for the synthesis of synthetic peptide combinatorial libraries (SPCLs) from mixtures of amino acids were explored. In a one-pot synthesis, the effect of the starting concentrations of amino acids on the resulting library composition was studied, and the optimum balance of amino acids was determined. Protein sequencing, MALDI-TOF, and amino acid analysis were used for the evaluation of the libraries, and their relative merits-are discussed. The effects of continuous-flow automated synthesis instrumentation in conjunction with polyethylene glycol-polystyrene (PEG-PS) graft supports and various cleavage cocktails on the successful synthesis of SPCLs were examined.

Optimized preparation of deca(L-alanyl)-L-valinamide by 9-fluorenylmethyloxycarbonyl (Fmoc) solid-phase synthesis on polyethylene glycol-polystyrene (PEG-PS) graft supports, with 1,8-diazobicyclo [5.4.0]-undec-7-ene (DBU) deprotection.

Deca(L-alanyl)-L-valinamide is known to be a challenging model target for solidphase peptide synthesis, due to its hydrophobicity and its tendency to form secondary structures which inhibit acylation and deprotection. Here we report systematic studies on the synthesis of this peptide on an automated continuous-flow instrument, using the 9-fluorenylmethyloxycarbonyl (Fmoc) group for N alpha-amino protection and a polyethylene-glycol polystyrene (PEGPS) graft support. The optimal deprotection reagent proved to be DBU-piperidine-DMF (1:1:48, vol/vol/vol). The synthetic peptides were analyzed and characterized by high-performance liquid chromatography and several mass spectrometric techniques.

Automated allyl cleavage for continuous-flow synthesis of cyclic and branched peptides.

An automated allyl cleavage scheme on a continuous-flow peptide synthesizer was used for the preparation of "head-to-tail" cyclic peptides, branched peptides, and multiple antigenic peptides. Standard allyl removal uses a suspended palladium catalyst. This approach is not feasible on a batch and continuous-flow peptide synthesizer due to problematic delivery of the insoluble palladium catalyst. Solvent conditions were examined and optimized to solubilize the catalyst, prevent undesired Fmoc deblocking and be compatible with sensitive amino acids (Trp and Met) and with glyco- and sulfopeptides. Protocols for a continuous-flow peptide synthesizer were modified using new conditions to carry out the allyl cleavage scheme for the facile preparation of complex peptides.

The development of high-performance liquid chromatographic analysis of allyl and allyloxycarbonyl side-chain-protected phenylthiohydantoin amino acids.

Ten phenylthiohydantoin (PTH) amino acids possessing allyl (Al) or allyloxycarbonyl (Aloc) side-chain-protecting groups have been characterized by high-performance liquid chromatography for use in Edman degradation sequence analysis. Optimized separation of side-chain-protected and -unprotected PTH amino acids was achieved on a C-18 reversed-phase column with a two-step gradient spanning 32 min. Five of the side-chain-protected amino acids [Cys(Al), Cys(Aloc), Lys(Aloc), Thr(Aloc), Tyr(Al)] were completely stable to the conditions of PTH derivatization, four [Asp(OAl), Arg(Aloc)2, Glu(OAl), Ser(Aloc)] were partially deprotected during PTH derivatization, and one [His(Aloc)] was completely deprotected during PTH derivatization. All allyl-based derivatives were well resolved from their side-chain-unprotected counterparts. Studies on the stability to piperidine treatment showed Asp(OAl), Cys(Al), Glu(OAl), Lys(Aloc), Thr(Aloc), and Tyr(Al), and possibly Arg(Aloc)2 and Ser(Aloc), to be suitable for peptide synthesis by 9-fluorenylmethoxycarbonyl (Fmoc)-based chemistry. Edman degradation of Al and Aloc side-chain-protected Conus geographus Lys9-alpha-conotoxin GI synthesized on 4-methylbenzhydrylamine-copoly(styrene-1%-DVB)-resin demonstrated the usefulness of these derivatives for solid-phase preview sequence analysis.