Examination and reliability of measuring muscle strength of ankle plantar flexion with knee extended.

[Purpose] A hand-held dynamometer (HHD) is less expensive than the isokinetic muscle strength measurement device, and research using HHD is gradually increasing. However, measurement is performed only at a low muscle strength level at which the heel does not take off or heel detachment occurs; therefore, fixation of the foot becomes a problem. This study aimed to determine the validation of measuring ankle plantar flexion strength (with the knee extended) using HHD. [Participants and Methods] Twenty healthy adults (14 males and 6 females) participated in this study. The chair used in this study was for swallowing videofluorography, which was fixed to a wall bar by the belt. The sensor was located at the third metatarsal head. After warming up, the participants sat in a long sitting position on the chair. We conducted the test two times. We used intraclass correlation coefficient (ICC) and Bland-Altman analysis to assess reliability. [Results] The ICC(1, 1) and ICC(2, 1) results were all greater than 0.9. No fixed and proportional errors were present. [Conclusion] The measurement method of this study was both intra- and inter-examiner reliabilities, which were high, and we suggest that sufficient clinical application is possible.

Effects of different visual presentation methods on movement procedure learning.

[Purpose] There is no established learning methods for movement procedures for activities of daily living. Patients with higher brain dysfunction and other disorders encounter challenges with movement procedures. Therefore, as a basic study on the memorization methods for movement procedures, we examined the differences between the effects of two memorization methods on healthy participants. [Participants and Methods] Forty student participants were asked to memorize and recall 10 movement elements. The control condition comprised all presented movements; whereas the intervention method comprised two movement elements (one block) each. The number of sets wherein all 10 movements were recalled and the number of consecutive recalls per set after 7 days were compared between the two conditions. [Results] The intervention method engendered significantly fewer sets that were recalled and significantly more consecutive recalls. [Conclusion] It is suggested that the method of presenting the movement procedure in smaller pieces is a more effective memory method than presenting the entire procedure.

Test-retest reliability of isometric ankle plantar flexion strength measurement performed by a hand-held dynamometer considering fixation: examination of healthy young participants.

[Purpose] This study aimed to investigate the test-retest reliability of isometric ankle plantar flexion strength measurements performed by a hand-held dynamometer (HHD) using two belts and a newly devised fixation plate. [Participants and Methods] The participants were 83 healthy individuals (female, n=31; male, n=52) with an average age of 20 years. An HHD (µTas F-1) sensor was fixed using two belts and a newly developed metal device to the measurement site on the dominant foot of a participant who was in a sitting position. Measurements were performed twice for each participant. [Results] The average value was 65.6 kgf (bodyweight ratio, 127.3%) for female and 88.0 kgf (136.9%) for male participants. The intraclass correlation coefficients of the two measurements were 0.915 for female and 0.938 for male participants. The minimum detectable change at 95% was 10.1 kgf (12.1% of the average value) for female and 12.1 kgf (15.4%) for male participants. [Conclusion] The test-retest reliability of measuring the ankle plantar flexion strength performed by an HHD using a belt and plate is high. Therefore, the increase or decrease in muscle strength should be judged based on the minimal detectable change with 95% confidence.

Reliability of ultrasound to measure the distance between lumbar interspinous processes.

OBJECTIVES: This study aimed to determine the reliability of ultrasound to measure the distance between interspinous processes of the lumbar spine at the segmental level (i.e., L1-L2, L2-L3, L3-L4, and L4-L5). METHODS: Ten men with no history of orthopedic diseases or dysfunctions were included in this study. In total, 720 images of the lumbar spines of participants were analyzed (10 participants, 4 segments, 3 trials, 3 positions, 2 examiners). With participants in three different positions, images of each segment specifically focused on the distance between lumbar interspinous processes. Bland-Altman analysis (BAA) was used to determine intra- and inter-rater reliability. RESULTS: Intra-rater intraclass correlation coefficient (ICC) values (1, 1) were found to range from 0.840 to 0.988, whereas inter-rater ICC values (2, 1) ranged from 0.605 to 0.876. BAA results confirmed a fixed bias regarding the L4-L5 of the lumbar spine segment in the flexion position. CONCLUSIONS: Inter-rater reliability decreased throughout this study; however, results showed that using ultrasound to measure the distance between lumbar segmental interspinous processes could be applied in clinical settings to evaluate lumbar segmental mobility.

Gait Reacquisition Rate, Home Outcome Rate, and Gait Prognosis in Patients with Femoral Neck Fractures and Mental Illness - A Multicenter Study.

OBJECTIVE: A total of 183 patients admitted to five hospitals for proximal femoral fractures and psychiatric disorders were examined to determine whether their physical function could be improved by rehabilitation and to identify factors that affected home discharge. METHODS: We conducted surveys to collect data regarding patients' age, sex, type of mental illness, location at time of injury, complications, Charlson Comorbidity Index, Global Assessment of Functioning scale scores, surgical technique, time from surgery to the start of rehabilitation at the target hospital, rehabilitation duration, results of cognitive function tests (e.g., the Mini Mental Status Examination), walking ability before the injury, final walking ability, functional independence measure (FIM) of the patient's activities of daily living at the start and end of treatments, and discharge destinations. RESULTS: The motor function index showed a significant improvement from an average of 36.0 points at admission to an average of 53.0 points at discharge. Overall, 47.9% of patients who were able to walk before injury could regain gait ability. The discharge rate to the patient's home was 15.8%. CONCLUSIONS: The gait reacquisition rate for patients with femoral neck fractures and mental illness admitted to a psychiatric ward was 47.9%, which was lower than that reported in previous studies, but higher than that for dementia patients. Binomial logistic regression analysis identified the following predictive items for home discharge: whether the fracture occurred at home, FIM cognition item scores at admission, and total and motor item scores at discharge. The derived equation had a high hit rate of 80.9%.

Validity and reliability of isometric knee extension muscle strength measurements using a belt-stabilized hand-held dynamometer: a comparison with the measurement using an isokinetic dynamometer in a sitting posture.

[Purpose] This study aimed to determine the validity and reliability of isometric knee extension muscle strength measurements using a belt-stabilized hand-held dynamometer compared to that using an isokinetic dynamometer with the participant in a sitting posture. [Participants and Methods] Forty-two university students participated. The isometric knee extension muscle strength was measured using a hand-held dynamometer and an isokinetic dynamometer. For both measurements, the participants were in the similar sitting posture. The sitting posture maintained trunk stability, with the hands on the bed, and the non-measurement-side toe touching the floor or table. The intra-class correlation coefficient and the relevance were verified. [Results] Intra-rater correlation coefficient (1, 1) of the two measurements was ≥0.75. A significant difference was found in the measurement value between males and females. No significant difference was found between the measurements value of the two devices. A significant positive correlation was found in the measurement value of two devices in the male participants. [Conclusion] When compared to the standard method of isometric knee extension muscle strength measurements using an isokinetic dynamometer with the participant in the sitting posture, measurements using the belt-stabilized hand-held dynamometer were considered valid and highly reliable in the male participants.

Isometric knee muscle strength measurement using a belt-stabilized hand-held dynamometer and an isokinetic dynamometer with and without trunk fixation: investigation of agreement of measurement values and factors influencing measurement.

[Purpose] The purpose of this study was to examine the agreement between the values obtained by using a hand-held dynamometer with a belt (belt-HHD) and an isokinetic dynamometer (IKD) for the measurement of isometric knee flexion and extension muscle strength. We also studied the factors influencing the measurement. [Participants and Methods] Overall, 26 healthy young adults (16 males, 10 females) participated in the study; the mean age was 21 years. Knee flexion and extension muscle strength were measured by three methods: 1) belt-HHD, 2) conventional IKD with the participant sitting on an attached chair (conv-IKD), and 3) modified IKD with the participant sitting on the same mat table as HHD (mod-IKD). [Results] In the measurement of knee extension, mod-IKD and conv-IKD showed a fixed bias and a proportional bias, conv-IKD and belt-HHD showed a fixed bias, and belt-HHD and mod-IKD showed a fixed bias. In the measurement knee flexion, conv-IKD and mod-IKD showed a proportional bias, belt-HHD and conv-IDK showed a fixed bias, and mod-IKD and belt-HHD showed a fixed bias. In each combination, the measured values were larger in the latter due to errors. However, the types and values of errors differed when analysis was conducted based on gender. [Conclusion] In order to increase the agreement between the values, it is necessary to revise the fixing method of the trunk, and the fixing method of the belt and the sensor pad in belt-HHD.

Effects of trunk stability on isometric knee extension muscle strength measurement while sitting.

[Purpose] This study aimed to investigate the effect of trunk stability on isometric knee extension muscle strength measurement while sitting by performing simultaneous measurements with a handheld dynamometer (HHD) and an isokinetic dynamometer (IKD) in the same seated condition. [Subjects and Methods] The subjects were 30 healthy volunteers. Isometric knee extension muscle strength was simultaneously measured with a HHD and an IKD by using an IKD-specific chair. The measurement was performed twice. Measurement instrument variables and the number of measurements were examined by using the analysis of variance and correlation tests. [Results] The measurement instrument variables and the number of measurements were not significantly different. The correlation coefficients between the HHD and IKD measurements were ≥0.96. [Conclusion] Isometric knee extension muscle strength measurement using the HHD in the sitting position resulted in a lower value than that using the IKD, presumably because of the effect of trunk stability on the measurement. In the same seated posture with trunk stability, no significant difference in measurement values was observed between the HHD and IKD. The present findings suggest that trunk stability while seated during isometric knee extension muscle strength measurement influenced the HHD measurement.

Absolute and relative reliability of lumbar interspinous process ultrasound imaging measurements.

[Purpose] The intra- and inter-examiner reliabilities of lumbar interspinous process distances measured by ultrasound imaging were examined. [Subjects and Methods] The subjects were 10 males who had no history of orthopedic diseases or dysfunctions. Ten lumbar interspinous images from 360 images captured from 10 subjects were selected. The 10 images were measured by nine examiners. The lumbar interspinous process distance measurements were performed five times by each examiner. In addition, four of the nine examiners measured the distances again after 4 days for test-retest analysis. In statistical analysis, the intraclass correlation coefficient was used to investigate relative reliability, and Bland-Altman analysis was used to investigate absolute reliability. [Results] The intraclass correlation coefficients (1, 1) for intra-examiner reliability ranged from 0.985 to 0.998. For inter-rater reliability, the intraclass correlation coefficient (2, 1) was 0.969. The intraclass correlation coefficients (1, 2) for test-retest reliability ranged from 0.991 to 0.999. The Bland-Altman analysis results indicated no systematic error. [Conclusion] The results indicate that ultrasound measurements of interspinous process distance are highly reliable even when measured only once by a single person.

Validity and reliability of isometric muscle strength measurements of hip abduction and abduction with external hip rotation in a bent-hip position using a handheld dynamometer with a belt.

[Purpose] This study aimed to investigate the relatedness, reliability, and validity of isometric muscle strength measurements of hip abduction and abduction with an external hip rotation in a bent-hip position using a handheld dynamometer with a belt. [Subjects and Methods] Twenty healthy young adults, with a mean age of 21.5 ± 0.6 years were included. Isometric hip muscle strength in the subjects' right legs was measured under two posture positions using two devices: a handheld dynamometer with a belt and an isokinetic dynamometer. Reliability was evaluated using an intra-class correlation coefficient (ICC); relatedness and validity were evaluated using Pearson's product moment correlation coefficient. Differences in measurements of devices were assessed by two-way ANOVA. [Results] ICC (1, 1) was ≥0.9; significant positive correlations in measurements were found between the two devices under both conditions. No main effect was found between the measurement values. [Conclusion] Our findings revealed that there was relatedness, reliability, and validity of this method for isometric muscle strength measurements using a handheld dynamometer with a belt.

Intrarater reliabilities of shoulder joint horizontal adductor muscle strength measurements using a handheld dynamometer for geriatric and stroke patients.

[Purpose] This study aimed to verify the appropriate number of measurements and the intrarater reliabilities of shoulder joint horizontal adductor muscle strength measurements using a handheld dynamometer (HHD) for geriatric and stroke patients. [Subjects and Methods] The subjects were 40 inpatients, who were divided into two groups: 20 stroke patients in the stroke group (SG), and 20 geriatric patients in the no-stroke group (N-SG). Measurements were performed three times using an HHD with a belt. The reliability was verified using Bland-Altman analysis and the intraclass correlation coefficient (ICC). [Results] ICC (1, 1) was >0.9. A systematic bias was not observed between the first and second measurement values except for the right side in N-SG. A systematic bias between the maximum value obtained during the first and second measurements and third measurement value was observed on the left side in N-SG, and on the non-paralyzed side in SG: the third measurement values were small in both cases. [Conclusion] Intrarater reliabilities were high for shoulder horizontal adductor strength measurements using an HHD with a belt for geriatric and stroke patients. Taking the systematic bias into consideration, these findings suggest that the required number of measurements is two.

Absolute reliability of shoulder joint horizontal adductor muscle strength measurements using a handheld dynamometer.

[Purpose] The aim of this study was to verify the absolute reliability of shoulder joint horizontal adductor muscle strength measurements using a handheld dynamometer (HHD). [Subjects and Methods] The subjects were 33 healthy college students. The measurements were made three times with the HHD fixed using a belt (BFHHD) or with the examiner's hand (conventional method; HFHHD). The absolute reliability of measurements was verified using Bland-Altman analysis, both in the all subjects group and a group of subjects showing measurements less than a fixed limit of 30 kgf. [Results] In the <30 kgf group, a systematic bias was not observed, and BFHHD values were greater than HFHHD values. BFHHD values in the all subjects group showed a systematic bias; the 3rd measurement value was less than the maximum value obtained during the 1st and 2nd measurements. [Conclusion] For obtaining an acceptable value during clinical measurements of horizontal adductor muscle strength, single measurements obtained using an HFHHD in the case of a <30 kgf group and the maximum value of two measurements obtained using a BFHHD are reliable.

Reliability and validity of an ultrasound-based imaging method for measuring interspinous process distance in the lumbar spine using two different index points.

[Purpose] This study assessed the reliability and validity of an ultrasound-based imaging method for measuring the interspinous process distance in the lumbar spine using two different index points. [Subjects and Methods] Ten healthy males were recruited. Five physical therapy students participated in this study as examiners. The L2-L3 interspinous distance was measured from the caudal end of the L2 spinous process to the cranial end of the L3 spinous process (E-E measurement) and from the top of the L2 spinous process to the top of the L3 spinous process (T-T measurement). Intraclass correlation coefficients were calculated to estimate the relative reliability. Validity was assessed using a model resembling the living human body. [Results] The reliability study showed no difference in intra-rater reliability between the two measurements. However, the E-E measurement showed higher inter-rater reliability than the T-T measurement (Intraclass correlation coefficients: 0.914 vs. 0.725). Moreover, the E-E measurement method had good validity (Intraclass correlation coefficients: 0.999 and 95% confidence interval for minimal detectable change: 0.29 mm). [Conclusion] These results demonstrate the high reliability and validity of ultrasound-based imaging in the quantitative assessment of lumbar interspinous process distance. Of the two methods, the E-E measurement method is recommended.

Test-retest reliability of isometric shoulder muscle strength measurement with a handheld dynamometer and belt.

[Purpose] The aim of this study was to develop a method of measuring isometric shoulder joint muscle strength using a handheld dynamometer with a belt and investigate its test-retest reliability. [Subjects] The subjects comprised 40 healthy adults. [Methods] Six types of isometric shoulder muscle strength were measured twice, and reliability was assessed. [Results] The intraclass correlation coefficient (1, 1) values ranged from 0.976 to 0.902. The result of a Bland-Altman analysis showed differences in the types of errors between measurement items. [Conclusion] The relative reliability of isometric shoulder muscle measurement using a handheld dynamometer with a belt was high. However, analysis of absolute reliability revealed errors that may affect interpretation of values; therefore, it was considered that adapting the greater of two measurement values is appropriate.

Reliability of isometric knee extension muscle strength measurements made by a hand-held dynamometer and a belt: a comparison of two types of device.

[Purpose] The purpose of the present study was to compare the reliability of 2 hand-held dynamometers (HHD-1, 2) with different designs, by performing isometric knee muscle extension measurements two times each. [Subjects] The subjects were 40 young healthy adults. [Methods] The reliability of the measurements was examined using Bland-Altman analysis. [Results] Bland-Altman analysis found a fixed bias in measurements made by HHD-1 with an average limits of agreement (LOA) value of -2.1 kgf. For HHD-2, only random errors were detected, and the minimal detectable change (MDC) was 11.4 kgf. Fixed biases were observed between the two devices with an average LOA value of 2.2 kgf. When the bodyweight ratio was used, fixed biases were observed in measurements made by both devices, and the average value of LOA was -0.03 kgf/kg. The comparison of the two devices revealed only random errors, and MDC was 0.22 kgf/kg. [Conclusion] For HHD measurements using these two devices, the appropriate number of measurements is two times, and comparison of measurement values between the two devices should be avoided.

Limits of the manipulative-fixed method for measurement of shoulder joint horizontal adduction muscle strength using a handheld dynamometer.

[Purpose] The aim of this study was to verify the limit of isometric muscle strength of shoulder joint horizontal adduction using handheld dynamometer (HHD) manipulated by hand (referred to as the manipulative-fixed method). [Subjects and Methods] The subjects were 33 healthy college students. The examiner was a healthy college student. Shoulder joint horizontal adductor muscle strength was measured using HHD with the subject in the supine position. The belt-fixed and manipulative-fixed methods were used to secure the HHD sensor unit. The limitations of the manipulative-fixed method were assessed by simple regression analysis, in which the participants were divided into 2 groups according to a branch point. The slope of the straight line of the graph was visualized. [Results] Single regression analysis of the <30 kgf group revealed significant results. The results of single regression of the >30 kgf group were not significant. [Conclusion] The manipulative-fixed method is simple to perform. However, there exists the possibility that the actual muscle strength is not measurable by this method. The measurement limit of the shoulder horizontal adduction strength with the manipulative-fixed method was 30 kgf in the case of the examiner in the present study. The fixed limit was also found to influence in the muscle strength of the upper limbs.

Reliability of Isometric Knee Extension Muscle Strength Measurements of Healthy Elderly Subjects Made with a Hand-held Dynamometer and a Belt.

[Purpose] The purpose of this study was to examine the reliability of three isometric knee extension strength measurements (IKE) made with a hand-held dynamometer (HHD) and a belt of healthy elderly living in the community as subjects. [Subjects] The subject cohort consisted of 186 healthy elderly people, aged 65 to 79 years, living in local communities. [Methods] IKE of the leg subjects used to kick a ball was measured. IKE of each subject was measured three times using an HHD-belt at intervals of 30 seconds. The reliability of the larger of the first two measurements (LV2) as well as the third measurement (3V) was investigated. [Results] The intraclass correlation coefficients [ICC (1, 1)] for LV2 and 3V were 0.955. Bland-Altman analysis showed a fixed bias, and the limits of agreement ranged from -5.6 to 4.6. [Conclusion] The ICC results show that the test-retest reproducibility of IKE measurements of healthy elderly subjects using an HHD-belt is high. However, Bland-Altman analysis showed a fixed bias, suggesting the need for three measurements.

An Investigation into Reliability of Knee Extension Muscle Strength Measurements, and into the Relationship between Muscle Strength and Means of Independent Mobility in the Ward: Examinations of Patients Who Underwent Femoral Neck Fracture Surgery.

[Purpose] The purpose of the present study was to investigate the reliability of isometric knee extension muscle strength measurement of patients who underwent femoral neck fracture surgery, as well as the relationship between independent mobility in the ward and knee muscle strength. [Subjects] The subjects were 75 patients who underwent femoral neck fracture surgery. [Methods] We used a hand-held dynamometer and a belt to measure isometric knee extension muscle strength three times, and used intraclass correlation coefficients (ICCs) to investigate the reliability of the measurements. We used a receiver operating characteristic curve to investigate the cutoff values for independent walking with walking sticks and non-independent mobility. [Results] ICCs (1, 1) were 0.9 or higher. The cutoff value for independent walking with walking sticks was 0.289 kgf/kg on the non-fractured side, 0.193 kgf/kg on the fractured side, and the average of both limbs was 0.238 kgf/kg. [Conclusion] We consider that the test-retest reliability of isometric knee extension muscle strength measurement of patients who have undergone femoral neck fracture surgery is high. We also consider that isometric knee extension muscle strength is useful for investigating means of independent mobility in the ward.

The effect of mastication on reaction latency to unanticipated external disturbances in the standing position.

Previous research has shown that mastication reduces shifts in the center of gravity of persons standing still. The present research was conducted to determine whether mastication improves reactive balance in the standing position in response to unanticipated external disturbances. The subjects were 32 healthy male adults (mean age 21.1 years, standard deviation (SD) 0.7 years). Latency data determined with the Motor Control Test of Computerized Dynamic Posturography (CDP) were compared for the three conditions of mastication status, the direction of translation, and the magnitude of translation, using three-way repeated measures ANOVA and lower-order ANOVA with the three conditions separated. Latency was significantly shorter with mastication than with the lower jaw relaxed (P < 0.00001). Mastication alone, however, cannot be considered significant because of the complex interactions involved among the three conditions. Mastication increases not only static balance but also reactive balance in response to unanticipated external disturbances. Gum chewing may therefore reduce falls among elderly persons with impaired balance.